diff --git a/Documentation/gpu/drivers.rst b/Documentation/gpu/drivers.rst
index b899cbc5c2b4..187201aedbe5 100644
--- a/Documentation/gpu/drivers.rst
+++ b/Documentation/gpu/drivers.rst
@@ -22,6 +22,7 @@ GPU Driver Documentation
    afbc
    komeda-kms
    panfrost
+   zynqmp
 
 .. only::  subproject and html
 
diff --git a/Documentation/gpu/zynqmp.rst b/Documentation/gpu/zynqmp.rst
new file mode 100644
index 000000000000..f57bfa0ad6ec
--- /dev/null
+++ b/Documentation/gpu/zynqmp.rst
@@ -0,0 +1,149 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+===============================================
+Xilinx ZynqMP Ultrascale+ DisplayPort Subsystem
+===============================================
+
+This subsystem handles DisplayPort video and audio output on the ZynqMP. It
+supports in-memory framebuffers with the DisplayPort DMA controller
+(xilinx-dpdma), as well as "live" video and audio from the programmable logic
+(PL). This subsystem can perform several transformations, including color space
+conversion, alpha blending, and audio mixing, although not all features are
+currently supported.
+
+debugfs
+-------
+
+To support debugging and compliance testing, several test modes can be enabled
+though debugfs. The following files in /sys/kernel/debug/dri/X/DP-1/test/
+control the DisplayPort test modes:
+
+active:
+        Writing a 1 to this file will activate test mode, and writing a 0 will
+        deactivate test mode. Writing a 1 or 0 when the test mode is already
+        active/inactive will re-activate/re-deactivate test mode. When test
+        mode is inactive, changes made to other files will have no (immediate)
+        effect, although the settings will be saved for when test mode is
+        activated. When test mode is active, changes made to other files will
+        apply immediately.
+
+custom:
+        Custom test pattern value
+
+downspread:
+        Enable/disable clock downspreading (spread-spectrum clocking) by
+        writing 1/0
+
+enhanced:
+        Enable/disable enhanced framing
+
+ignore_aux_errors:
+        Ignore AUX errors when set to 1. Writes to this file take effect
+        immediately (regardless of whether test mode is active) and affect all
+        AUX transfers.
+
+ignore_hpd:
+        Ignore hotplug events (such as cable removals or monitor link
+        retraining requests) when set to 1. Writes to this file take effect
+        immediately (regardless of whether test mode is active).
+
+laneX_preemphasis:
+        Preemphasis from 0 (lowest) to 2 (highest) for lane X
+
+laneX_swing:
+        Voltage swing from 0 (lowest) to 3 (highest) for lane X
+
+lanes:
+        Number of lanes to use (1, 2, or 4)
+
+pattern:
+        Test pattern. May be one of:
+
+                video
+                        Use regular video input
+
+                symbol-error
+                        Symbol error measurement pattern
+
+                prbs7
+                        Output of the PRBS7 (x^7 + x^6 + 1) polynomial
+
+                80bit-custom
+                        A custom 80-bit pattern
+
+                cp2520
+                        HBR2 compliance eye pattern
+
+                tps1
+                        Link training symbol pattern TPS1 (/D10.2/)
+
+                tps2
+                        Link training symbol pattern TPS2
+
+                tps3
+                        Link training symbol pattern TPS3 (for HBR2)
+
+rate:
+        Rate in hertz. One of
+
+                * 5400000000 (HBR2)
+                * 2700000000 (HBR)
+                * 1620000000 (RBR)
+
+You can dump the displayport test settings with the following command::
+
+        for prop in /sys/kernel/debug/dri/1/DP-1/test/*; do
+                printf '%-17s ' ${prop##*/}
+                if [ ${prop##*/} = custom ]; then
+                        hexdump -C $prop | head -1
+                else
+                        cat $prop
+                fi
+        done
+
+The output could look something like::
+
+        active            1
+        custom            00000000  00 00 00 00 00 00 00 00  00 00                    |..........|
+        downspread        0
+        enhanced          1
+        ignore_aux_errors 1
+        ignore_hpd        1
+        lane0_preemphasis 0
+        lane0_swing       3
+        lane1_preemphasis 0
+        lane1_swing       3
+        lanes             2
+        pattern           prbs7
+        rate              1620000000
+
+The recommended test procedure is to connect the board to a monitor,
+configure test mode, activate test mode, and then disconnect the cable
+and connect it to your test equipment of choice. For example, one
+sequence of commands could be::
+
+        echo 1 > /sys/kernel/debug/dri/1/DP-1/test/enhanced
+        echo tps1 > /sys/kernel/debug/dri/1/DP-1/test/pattern
+        echo 1620000000 > /sys/kernel/debug/dri/1/DP-1/test/rate
+        echo 1 > /sys/kernel/debug/dri/1/DP-1/test/ignore_aux_errors
+        echo 1 > /sys/kernel/debug/dri/1/DP-1/test/ignore_hpd
+        echo 1 > /sys/kernel/debug/dri/1/DP-1/test/active
+
+at which point the cable could be disconnected from the monitor.
+
+Internals
+---------
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_disp.h
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_dpsub.h
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_kms.h
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_disp.c
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_dp.c
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_dpsub.c
+
+.. kernel-doc:: drivers/gpu/drm/xlnx/zynqmp_kms.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 8d1052fa6a69..78680180aefc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7305,6 +7305,7 @@ L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/xlnx/
+F:	Documentation/gpu/zynqmp.rst
 F:	drivers/gpu/drm/xlnx/
 
 DRM GPU SCHEDULER
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index dea4b8a819fd..5cf9e514b848 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -18,7 +18,9 @@
 #include <drm/drm_modes.h>
 #include <drm/drm_of.h>
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/io.h>
@@ -50,6 +52,7 @@ MODULE_PARM_DESC(power_on_delay_ms, "DP power on delay in msec (default: 4)");
 #define ZYNQMP_DP_LANE_COUNT_SET			0x4
 #define ZYNQMP_DP_ENHANCED_FRAME_EN			0x8
 #define ZYNQMP_DP_TRAINING_PATTERN_SET			0xc
+#define ZYNQMP_DP_LINK_QUAL_PATTERN_SET			0x10
 #define ZYNQMP_DP_SCRAMBLING_DISABLE			0x14
 #define ZYNQMP_DP_DOWNSPREAD_CTL			0x18
 #define ZYNQMP_DP_SOFTWARE_RESET			0x1c
@@ -63,6 +66,9 @@ MODULE_PARM_DESC(power_on_delay_ms, "DP power on delay in msec (default: 4)");
 							 ZYNQMP_DP_SOFTWARE_RESET_STREAM3 | \
 							 ZYNQMP_DP_SOFTWARE_RESET_STREAM4 | \
 							 ZYNQMP_DP_SOFTWARE_RESET_AUX)
+#define ZYNQMP_DP_COMP_PATTERN_80BIT_1			0x20
+#define ZYNQMP_DP_COMP_PATTERN_80BIT_2			0x24
+#define ZYNQMP_DP_COMP_PATTERN_80BIT_3			0x28
 
 /* Core enable registers */
 #define ZYNQMP_DP_TRANSMITTER_ENABLE			0x80
@@ -206,6 +212,7 @@ MODULE_PARM_DESC(power_on_delay_ms, "DP power on delay in msec (default: 4)");
 #define ZYNQMP_DP_TX_PHY_POWER_DOWN_LANE_2		BIT(2)
 #define ZYNQMP_DP_TX_PHY_POWER_DOWN_LANE_3		BIT(3)
 #define ZYNQMP_DP_TX_PHY_POWER_DOWN_ALL			0xf
+#define ZYNQMP_DP_TRANSMIT_PRBS7			0x230
 #define ZYNQMP_DP_PHY_PRECURSOR_LANE_0			0x23c
 #define ZYNQMP_DP_PHY_PRECURSOR_LANE_1			0x240
 #define ZYNQMP_DP_PHY_PRECURSOR_LANE_2			0x244
@@ -273,6 +280,69 @@ struct zynqmp_dp_config {
 	u8 bpp;
 };
 
+/**
+ * enum test_pattern - Test patterns for test testing
+ * @TEST_VIDEO: Use regular video input
+ * @TEST_SYMBOL_ERROR: Symbol error measurement pattern
+ * @TEST_PRBS7: Output of the PRBS7 (x^7 + x^6 + 1) polynomial
+ * @TEST_80BIT_CUSTOM: A custom 80-bit pattern
+ * @TEST_CP2520: HBR2 compliance eye pattern
+ * @TEST_TPS1: Link training symbol pattern TPS1 (/D10.2/)
+ * @TEST_TPS2: Link training symbol pattern TPS2
+ * @TEST_TPS3: Link training symbol pattern TPS3 (for HBR2)
+ */
+enum test_pattern {
+	TEST_VIDEO,
+	TEST_TPS1,
+	TEST_TPS2,
+	TEST_TPS3,
+	TEST_SYMBOL_ERROR,
+	TEST_PRBS7,
+	TEST_80BIT_CUSTOM,
+	TEST_CP2520,
+};
+
+static const char *const test_pattern_str[] = {
+	[TEST_VIDEO] = "video",
+	[TEST_TPS1] = "tps1",
+	[TEST_TPS2] = "tps2",
+	[TEST_TPS3] = "tps3",
+	[TEST_SYMBOL_ERROR] = "symbol-error",
+	[TEST_PRBS7] = "prbs7",
+	[TEST_80BIT_CUSTOM] = "80bit-custom",
+	[TEST_CP2520] = "cp2520",
+};
+
+/**
+ * struct zynqmp_dp_test - Configuration for test mode
+ * @pattern: The test pattern
+ * @enhanced: Use enhanced framing
+ * @downspread: Use SSC
+ * @active: Whether test mode is active
+ * @custom: Custom pattern for %TEST_80BIT_CUSTOM
+ * @train_set: Voltage/preemphasis settings
+ * @bw_code: Bandwidth code for the link
+ * @link_cnt: Number of lanes
+ */
+struct zynqmp_dp_test {
+	enum test_pattern pattern;
+	bool enhanced, downspread, active;
+	u8 custom[10];
+	u8 train_set[ZYNQMP_DP_MAX_LANES];
+	u8 bw_code;
+	u8 link_cnt;
+};
+
+/**
+ * struct zynqmp_dp_train_set_priv - Private data for train_set debugfs files
+ * @dp: DisplayPort IP core structure
+ * @lane: The lane for this file
+ */
+struct zynqmp_dp_train_set_priv {
+	struct zynqmp_dp *dp;
+	int lane;
+};
+
 /**
  * struct zynqmp_dp - Xilinx DisplayPort core
  * @dev: device structure
@@ -283,23 +353,28 @@ struct zynqmp_dp_config {
  * @irq: irq
  * @bridge: DRM bridge for the DP encoder
  * @next_bridge: The downstream bridge
+ * @test: Configuration for test mode
  * @config: IP core configuration from DTS
  * @aux: aux channel
  * @aux_done: Completed when we get an AUX reply or timeout
+ * @ignore_aux_errors: If set, AUX errors are suppressed
  * @phy: PHY handles for DP lanes
  * @num_lanes: number of enabled phy lanes
  * @hpd_work: hot plug detection worker
  * @hpd_irq_work: hot plug detection IRQ worker
+ * @ignore_hpd: If set, HPD events and IRQs are ignored
  * @status: connection status
  * @enabled: flag to indicate if the device is enabled
  * @dpcd: DP configuration data from currently connected sink device
  * @link_config: common link configuration between IP core and sink device
  * @mode: current mode between IP core and sink device
  * @train_set: set of training data
+ * @debugfs_train_set: Debugfs private data for @train_set
  *
  * @lock covers the link configuration in this struct and the device's
- * registers. It does not cover @aux. It is not strictly required for any of
- * the members which are only modified at probe/remove time (e.g. @dev).
+ * registers. It does not cover @aux or @ignore_aux_errors. It is not strictly
+ * required for any of the members which are only modified at probe/remove time
+ * (e.g. @dev).
  */
 struct zynqmp_dp {
 	struct drm_dp_aux aux;
@@ -319,9 +394,13 @@ struct zynqmp_dp {
 	enum drm_connector_status status;
 	int irq;
 	bool enabled;
+	bool ignore_aux_errors;
+	bool ignore_hpd;
 
+	struct zynqmp_dp_train_set_priv debugfs_train_set[ZYNQMP_DP_MAX_LANES];
 	struct zynqmp_dp_mode mode;
 	struct zynqmp_dp_link_config link_config;
+	struct zynqmp_dp_test test;
 	struct zynqmp_dp_config config;
 	u8 dpcd[DP_RECEIVER_CAP_SIZE];
 	u8 train_set[ZYNQMP_DP_MAX_LANES];
@@ -1034,6 +1113,8 @@ zynqmp_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
 
 		if (dp->status == connector_status_disconnected) {
 			dev_dbg(dp->dev, "no connected aux device\n");
+			if (dp->ignore_aux_errors)
+				goto fake_response;
 			return -ENODEV;
 		}
 
@@ -1042,7 +1123,13 @@ zynqmp_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
 
 	dev_dbg(dp->dev, "failed to do aux transfer (%d)\n", ret);
 
-	return ret;
+	if (!dp->ignore_aux_errors)
+		return ret;
+
+fake_response:
+	msg->reply = DP_AUX_NATIVE_REPLY_ACK;
+	memset(msg->buffer, 0, msg->size);
+	return msg->size;
 }
 
 /**
@@ -1616,6 +1703,584 @@ static struct edid *zynqmp_dp_bridge_get_edid(struct drm_bridge *bridge,
 	return drm_get_edid(connector, &dp->aux.ddc);
 }
 
+/* -----------------------------------------------------------------------------
+ * debugfs
+ */
+
+/**
+ * zynqmp_dp_set_test_pattern() - Configure the link for a test pattern
+ * @dp: DisplayPort IP core structure
+ * @pattern: The test pattern to configure
+ * @custom: The custom pattern to use if @pattern is %TEST_80BIT_CUSTOM
+ *
+ * Return: 0 on success, or negative errno on (DPCD) failure
+ */
+static int zynqmp_dp_set_test_pattern(struct zynqmp_dp *dp,
+				      enum test_pattern pattern,
+				      u8 *const custom)
+{
+	bool scramble = false;
+	u32 train_pattern = 0;
+	u32 link_pattern = 0;
+	u8 dpcd_train = 0;
+	u8 dpcd_link = 0;
+	int ret;
+
+	switch (pattern) {
+	case TEST_TPS1:
+		train_pattern = 1;
+		break;
+	case TEST_TPS2:
+		train_pattern = 2;
+		break;
+	case TEST_TPS3:
+		train_pattern = 3;
+		break;
+	case TEST_SYMBOL_ERROR:
+		scramble = true;
+		link_pattern = DP_PHY_TEST_PATTERN_ERROR_COUNT;
+		break;
+	case TEST_PRBS7:
+		/* We use a dedicated register to enable PRBS7 */
+		dpcd_link = DP_LINK_QUAL_PATTERN_ERROR_RATE;
+		break;
+	case TEST_80BIT_CUSTOM: {
+		const u8 *p = custom;
+
+		link_pattern = DP_LINK_QUAL_PATTERN_80BIT_CUSTOM;
+
+		zynqmp_dp_write(dp, ZYNQMP_DP_COMP_PATTERN_80BIT_1,
+				(p[3] << 24) | (p[2] << 16) | (p[1] << 8) | p[0]);
+		zynqmp_dp_write(dp, ZYNQMP_DP_COMP_PATTERN_80BIT_2,
+				(p[7] << 24) | (p[6] << 16) | (p[5] << 8) | p[4]);
+		zynqmp_dp_write(dp, ZYNQMP_DP_COMP_PATTERN_80BIT_3,
+				(p[9] << 8) | p[8]);
+		break;
+	}
+	case TEST_CP2520:
+		link_pattern = DP_LINK_QUAL_PATTERN_CP2520_PAT_1;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		fallthrough;
+	case TEST_VIDEO:
+		scramble = true;
+	}
+
+	zynqmp_dp_write(dp, ZYNQMP_DP_SCRAMBLING_DISABLE, !scramble);
+	zynqmp_dp_write(dp, ZYNQMP_DP_TRAINING_PATTERN_SET, train_pattern);
+	zynqmp_dp_write(dp, ZYNQMP_DP_LINK_QUAL_PATTERN_SET, link_pattern);
+	zynqmp_dp_write(dp, ZYNQMP_DP_TRANSMIT_PRBS7, pattern == TEST_PRBS7);
+
+	dpcd_link = dpcd_link ?: link_pattern;
+	dpcd_train = train_pattern;
+	if (!scramble)
+		dpcd_train |= DP_LINK_SCRAMBLING_DISABLE;
+
+	if (dp->dpcd[DP_DPCD_REV] < 0x12) {
+		if (pattern == TEST_CP2520)
+			dev_warn(dp->dev,
+				"can't set sink link quality pattern to CP2520 for DPCD < r1.2; error counters will be invalid\n");
+		else
+			dpcd_train |= FIELD_PREP(DP_LINK_QUAL_PATTERN_11_MASK,
+						 dpcd_link);
+	} else {
+		u8 dpcd_link_lane[ZYNQMP_DP_MAX_LANES];
+
+		memset(dpcd_link_lane, dpcd_link, ZYNQMP_DP_MAX_LANES);
+		ret = drm_dp_dpcd_write(&dp->aux, DP_LINK_QUAL_LANE0_SET,
+					dpcd_link_lane, ZYNQMP_DP_MAX_LANES);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, dpcd_train);
+	return ret < 0 ? ret : 0;
+}
+
+static int zynqmp_dp_test_setup(struct zynqmp_dp *dp)
+{
+	return zynqmp_dp_setup(dp, dp->test.bw_code, dp->test.link_cnt,
+			       dp->test.enhanced, dp->test.downspread);
+}
+
+static ssize_t zynqmp_dp_pattern_read(struct file *file, char __user *user_buf,
+				      size_t count, loff_t *ppos)
+{
+	struct dentry *dentry = file->f_path.dentry;
+	struct zynqmp_dp *dp = file->private_data;
+	char buf[16];
+	ssize_t ret;
+
+	ret = debugfs_file_get(dentry);
+	if (unlikely(ret))
+		return ret;
+
+	mutex_lock(&dp->lock);
+	ret = snprintf(buf, sizeof(buf), "%s\n",
+		       test_pattern_str[dp->test.pattern]);
+	mutex_unlock(&dp->lock);
+
+	debugfs_file_put(dentry);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+}
+
+static ssize_t zynqmp_dp_pattern_write(struct file *file,
+				       const char __user *user_buf,
+				       size_t count, loff_t *ppos)
+{
+
+	struct dentry *dentry = file->f_path.dentry;
+	struct zynqmp_dp *dp = file->private_data;
+	char buf[16];
+	ssize_t ret;
+	int pattern;
+
+	ret = debugfs_file_get(dentry);
+	if (unlikely(ret))
+		return ret;
+
+	ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf,
+				     count);
+	if (ret < 0)
+		goto out;
+	buf[ret] = '\0';
+
+	pattern = sysfs_match_string(test_pattern_str, buf);
+	if (pattern < 0) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	mutex_lock(&dp->lock);
+	dp->test.pattern = pattern;
+	if (dp->test.active)
+		ret = zynqmp_dp_set_test_pattern(dp, dp->test.pattern,
+						 dp->test.custom) ?: ret;
+	mutex_unlock(&dp->lock);
+
+out:
+	debugfs_file_put(dentry);
+	return ret;
+}
+
+static const struct file_operations fops_zynqmp_dp_pattern = {
+	.read = zynqmp_dp_pattern_read,
+	.write = zynqmp_dp_pattern_write,
+	.open = simple_open,
+	.llseek = noop_llseek,
+};
+
+static int zynqmp_dp_enhanced_get(void *data, u64 *val)
+{
+	struct zynqmp_dp *dp = data;
+
+	mutex_lock(&dp->lock);
+	*val = dp->test.enhanced;
+	mutex_unlock(&dp->lock);
+	return 0;
+}
+
+static int zynqmp_dp_enhanced_set(void *data, u64 val)
+{
+	struct zynqmp_dp *dp = data;
+	int ret = 0;
+
+	mutex_lock(&dp->lock);
+	dp->test.enhanced = val;
+	if (dp->test.active)
+		ret = zynqmp_dp_test_setup(dp);
+	mutex_unlock(&dp->lock);
+
+	return ret;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_zynqmp_dp_enhanced, zynqmp_dp_enhanced_get,
+			 zynqmp_dp_enhanced_set, "%llu\n");
+
+static int zynqmp_dp_downspread_get(void *data, u64 *val)
+{
+	struct zynqmp_dp *dp = data;
+
+	mutex_lock(&dp->lock);
+	*val = dp->test.downspread;
+	mutex_unlock(&dp->lock);
+	return 0;
+}
+
+static int zynqmp_dp_downspread_set(void *data, u64 val)
+{
+	struct zynqmp_dp *dp = data;
+	int ret = 0;
+
+	mutex_lock(&dp->lock);
+	dp->test.downspread = val;
+	if (dp->test.active)
+		ret = zynqmp_dp_test_setup(dp);
+	mutex_unlock(&dp->lock);
+
+	return ret;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_zynqmp_dp_downspread, zynqmp_dp_downspread_get,
+			 zynqmp_dp_downspread_set, "%llu\n");
+
+static int zynqmp_dp_active_get(void *data, u64 *val)
+{
+	struct zynqmp_dp *dp = data;
+
+	mutex_lock(&dp->lock);
+	*val = dp->test.active;
+	mutex_unlock(&dp->lock);
+	return 0;
+}
+
+static int zynqmp_dp_active_set(void *data, u64 val)
+{
+	struct zynqmp_dp *dp = data;
+	int ret = 0;
+
+	mutex_lock(&dp->lock);
+	if (val) {
+		if (val < 2) {
+			ret = zynqmp_dp_test_setup(dp);
+			if (ret)
+				goto out;
+		}
+
+		ret = zynqmp_dp_set_test_pattern(dp, dp->test.pattern,
+						 dp->test.custom);
+		if (ret)
+			goto out;
+
+		ret = zynqmp_dp_update_vs_emph(dp, dp->test.train_set);
+		if (ret)
+			goto out;
+
+		dp->test.active = true;
+	} else {
+		int err;
+
+		dp->test.active = false;
+		err = zynqmp_dp_set_test_pattern(dp, TEST_VIDEO, NULL);
+		if (err)
+			dev_warn(dp->dev, "could not clear test pattern: %d\n",
+				 err);
+		zynqmp_dp_train_loop(dp);
+	}
+out:
+	mutex_unlock(&dp->lock);
+
+	return ret;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_zynqmp_dp_active, zynqmp_dp_active_get,
+			 zynqmp_dp_active_set, "%llu\n");
+
+static ssize_t zynqmp_dp_custom_read(struct file *file, char __user *user_buf,
+				      size_t count, loff_t *ppos)
+{
+	struct dentry *dentry = file->f_path.dentry;
+	struct zynqmp_dp *dp = file->private_data;
+	ssize_t ret;
+
+	ret = debugfs_file_get(dentry);
+	if (unlikely(ret))
+		return ret;
+
+	mutex_lock(&dp->lock);
+	ret = simple_read_from_buffer(user_buf, count, ppos, &dp->test.custom,
+				      sizeof(dp->test.custom));
+	mutex_unlock(&dp->lock);
+
+	debugfs_file_put(dentry);
+	return ret;
+}
+
+static ssize_t zynqmp_dp_custom_write(struct file *file,
+				      const char __user *user_buf,
+				      size_t count, loff_t *ppos)
+{
+
+	struct dentry *dentry = file->f_path.dentry;
+	struct zynqmp_dp *dp = file->private_data;
+	ssize_t ret;
+	char buf[sizeof(dp->test.custom)];
+
+	ret = debugfs_file_get(dentry);
+	if (unlikely(ret))
+		return ret;
+
+	ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count);
+	if (ret < 0)
+		goto out;
+
+	mutex_lock(&dp->lock);
+	memcpy(dp->test.custom, buf, ret);
+	if (dp->test.active)
+		ret = zynqmp_dp_set_test_pattern(dp, dp->test.pattern,
+						 dp->test.custom) ?: ret;
+	mutex_unlock(&dp->lock);
+
+out:
+	debugfs_file_put(dentry);
+	return ret;
+}
+
+static const struct file_operations fops_zynqmp_dp_custom = {
+	.read = zynqmp_dp_custom_read,
+	.write = zynqmp_dp_custom_write,
+	.open = simple_open,
+	.llseek = noop_llseek,
+};
+
+static int zynqmp_dp_swing_get(void *data, u64 *val)
+{
+	struct zynqmp_dp_train_set_priv *priv = data;
+	struct zynqmp_dp *dp = priv->dp;
+
+	mutex_lock(&dp->lock);
+	*val = dp->test.train_set[priv->lane] & DP_TRAIN_VOLTAGE_SWING_MASK;
+	mutex_unlock(&dp->lock);
+	return 0;
+}
+
+static int zynqmp_dp_swing_set(void *data, u64 val)
+{
+	struct zynqmp_dp_train_set_priv *priv = data;
+	struct zynqmp_dp *dp = priv->dp;
+	u8 *train_set = &dp->test.train_set[priv->lane];
+	int ret = 0;
+
+	if (val > 3)
+		return -EINVAL;
+
+	mutex_lock(&dp->lock);
+	*train_set &= ~(DP_TRAIN_MAX_SWING_REACHED |
+			DP_TRAIN_VOLTAGE_SWING_MASK);
+	*train_set |= val;
+	if (val == 3)
+		*train_set |= DP_TRAIN_MAX_SWING_REACHED;
+
+	if (dp->test.active)
+		ret = zynqmp_dp_update_vs_emph(dp, dp->test.train_set);
+	mutex_unlock(&dp->lock);
+
+	return ret;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_zynqmp_dp_swing, zynqmp_dp_swing_get,
+			 zynqmp_dp_swing_set, "%llu\n");
+
+static int zynqmp_dp_preemphasis_get(void *data, u64 *val)
+{
+	struct zynqmp_dp_train_set_priv *priv = data;
+	struct zynqmp_dp *dp = priv->dp;
+
+	mutex_lock(&dp->lock);
+	*val = FIELD_GET(DP_TRAIN_PRE_EMPHASIS_MASK,
+			 dp->test.train_set[priv->lane]);
+	mutex_unlock(&dp->lock);
+	return 0;
+}
+
+static int zynqmp_dp_preemphasis_set(void *data, u64 val)
+{
+	struct zynqmp_dp_train_set_priv *priv = data;
+	struct zynqmp_dp *dp = priv->dp;
+	u8 *train_set = &dp->test.train_set[priv->lane];
+	int ret = 0;
+
+	if (val > 2)
+		return -EINVAL;
+
+	mutex_lock(&dp->lock);
+	*train_set &= ~(DP_TRAIN_MAX_PRE_EMPHASIS_REACHED |
+			DP_TRAIN_PRE_EMPHASIS_MASK);
+	*train_set |= val;
+	if (val == 2)
+		*train_set |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+	if (dp->test.active)
+		ret = zynqmp_dp_update_vs_emph(dp, dp->test.train_set);
+	mutex_unlock(&dp->lock);
+
+	return ret;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_zynqmp_dp_preemphasis, zynqmp_dp_preemphasis_get,
+			 zynqmp_dp_preemphasis_set, "%llu\n");
+
+static int zynqmp_dp_lanes_get(void *data, u64 *val)
+{
+	struct zynqmp_dp *dp = data;
+
+	mutex_lock(&dp->lock);
+	*val = dp->test.link_cnt;
+	mutex_unlock(&dp->lock);
+	return 0;
+}
+
+static int zynqmp_dp_lanes_set(void *data, u64 val)
+{
+	struct zynqmp_dp *dp = data;
+	int ret = 0;
+
+	if (val > ZYNQMP_DP_MAX_LANES)
+		return -EINVAL;
+
+	mutex_lock(&dp->lock);
+	if (val > dp->num_lanes) {
+		ret = -EINVAL;
+	} else {
+		dp->test.link_cnt = val;
+		if (dp->test.active)
+			ret = zynqmp_dp_test_setup(dp);
+	}
+	mutex_unlock(&dp->lock);
+
+	return ret;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_zynqmp_dp_lanes, zynqmp_dp_lanes_get,
+			 zynqmp_dp_lanes_set, "%llu\n");
+
+static int zynqmp_dp_rate_get(void *data, u64 *val)
+{
+	struct zynqmp_dp *dp = data;
+
+	mutex_lock(&dp->lock);
+	*val = drm_dp_bw_code_to_link_rate(dp->test.bw_code) * 10000;
+	mutex_unlock(&dp->lock);
+	return 0;
+}
+
+static int zynqmp_dp_rate_set(void *data, u64 val)
+{
+	struct zynqmp_dp *dp = data;
+	int link_rate;
+	int ret = 0;
+	u8 bw_code;
+
+	if (do_div(val, 10000))
+		return -EINVAL;
+
+	bw_code = drm_dp_link_rate_to_bw_code(val);
+	link_rate = drm_dp_bw_code_to_link_rate(bw_code);
+	if (val != link_rate)
+		return -EINVAL;
+
+	if (bw_code != DP_LINK_BW_1_62 && bw_code != DP_LINK_BW_2_7 &&
+	    bw_code != DP_LINK_BW_5_4)
+		return -EINVAL;
+
+	mutex_lock(&dp->lock);
+	dp->test.bw_code = bw_code;
+	if (dp->test.active)
+		ret = zynqmp_dp_test_setup(dp);
+	mutex_unlock(&dp->lock);
+
+	return ret;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_zynqmp_dp_rate, zynqmp_dp_rate_get,
+			 zynqmp_dp_rate_set, "%llu\n");
+
+static int zynqmp_dp_ignore_aux_errors_get(void *data, u64 *val)
+{
+	struct zynqmp_dp *dp = data;
+
+	mutex_lock(&dp->aux.hw_mutex);
+	*val = dp->ignore_aux_errors;
+	mutex_unlock(&dp->aux.hw_mutex);
+	return 0;
+}
+
+static int zynqmp_dp_ignore_aux_errors_set(void *data, u64 val)
+{
+	struct zynqmp_dp *dp = data;
+
+	if (val != !!val)
+		return -EINVAL;
+
+	mutex_lock(&dp->aux.hw_mutex);
+	dp->ignore_aux_errors = val;
+	mutex_unlock(&dp->aux.hw_mutex);
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_zynqmp_dp_ignore_aux_errors,
+			 zynqmp_dp_ignore_aux_errors_get,
+			 zynqmp_dp_ignore_aux_errors_set, "%llu\n");
+
+static int zynqmp_dp_ignore_hpd_get(void *data, u64 *val)
+{
+	struct zynqmp_dp *dp = data;
+
+	mutex_lock(&dp->lock);
+	*val = dp->ignore_hpd;
+	mutex_unlock(&dp->lock);
+	return 0;
+}
+
+static int zynqmp_dp_ignore_hpd_set(void *data, u64 val)
+{
+	struct zynqmp_dp *dp = data;
+
+	if (val != !!val)
+		return -EINVAL;
+
+	mutex_lock(&dp->lock);
+	dp->ignore_hpd = val;
+	mutex_lock(&dp->lock);
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_zynqmp_dp_ignore_hpd, zynqmp_dp_ignore_hpd_get,
+			 zynqmp_dp_ignore_hpd_set, "%llu\n");
+
+static void zynqmp_dp_bridge_debugfs_init(struct drm_bridge *bridge,
+					  struct dentry *root)
+{
+	struct zynqmp_dp *dp = bridge_to_dp(bridge);
+	struct dentry *test;
+	int i;
+
+	dp->test.bw_code = DP_LINK_BW_5_4;
+	dp->test.link_cnt = dp->num_lanes;
+
+	test = debugfs_create_dir("test", root);
+#define CREATE_FILE(name) \
+	debugfs_create_file(#name, 0600, test, dp, &fops_zynqmp_dp_##name)
+	CREATE_FILE(pattern);
+	CREATE_FILE(enhanced);
+	CREATE_FILE(downspread);
+	CREATE_FILE(active);
+	CREATE_FILE(custom);
+	CREATE_FILE(rate);
+	CREATE_FILE(lanes);
+	CREATE_FILE(ignore_aux_errors);
+	CREATE_FILE(ignore_hpd);
+
+	for (i = 0; i < dp->num_lanes; i++) {
+		static const char fmt[] = "lane%d_preemphasis";
+		char name[sizeof(fmt)];
+
+		dp->debugfs_train_set[i].dp = dp;
+		dp->debugfs_train_set[i].lane = i;
+
+		snprintf(name, sizeof(name), fmt, i);
+		debugfs_create_file(name, 0600, test,
+				    &dp->debugfs_train_set[i],
+				    &fops_zynqmp_dp_preemphasis);
+
+		snprintf(name, sizeof(name), "lane%d_swing", i);
+		debugfs_create_file(name, 0600, test,
+				    &dp->debugfs_train_set[i],
+				    &fops_zynqmp_dp_swing);
+	}
+}
+
 static const struct drm_bridge_funcs zynqmp_dp_bridge_funcs = {
 	.attach = zynqmp_dp_bridge_attach,
 	.detach = zynqmp_dp_bridge_detach,
@@ -1628,6 +2293,7 @@ static const struct drm_bridge_funcs zynqmp_dp_bridge_funcs = {
 	.atomic_check = zynqmp_dp_bridge_atomic_check,
 	.detect = zynqmp_dp_bridge_detect,
 	.get_edid = zynqmp_dp_bridge_get_edid,
+	.debugfs_init = zynqmp_dp_bridge_debugfs_init,
 };
 
 /* -----------------------------------------------------------------------------
@@ -1662,6 +2328,11 @@ static void zynqmp_dp_hpd_work_func(struct work_struct *work)
 	enum drm_connector_status status;
 
 	mutex_lock(&dp->lock);
+	if (dp->ignore_hpd) {
+		mutex_unlock(&dp->lock);
+		return;
+	}
+
 	status = __zynqmp_dp_bridge_detect(dp);
 	mutex_unlock(&dp->lock);
 
@@ -1676,6 +2347,11 @@ static void zynqmp_dp_hpd_irq_work_func(struct work_struct *work)
 	int err;
 
 	mutex_lock(&dp->lock);
+	if (dp->ignore_hpd) {
+		mutex_unlock(&dp->lock);
+		return;
+	}
+
 	err = drm_dp_dpcd_read(&dp->aux, DP_SINK_COUNT, status,
 			       DP_LINK_STATUS_SIZE + 2);
 	if (err < 0) {
