@@ -74,6 +74,7 @@
* also shares the &struct drm_plane_helper_funcs function table with the plane
* helpers.
*/
+
static void
drm_atomic_helper_plane_changed(struct drm_atomic_state *state,
struct drm_plane_state *old_plane_state,
@@ -1122,11 +1123,11 @@ crtc_needs_disable(struct drm_crtc_state *old_state,
}
static void
-disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
+disable_encoder_brige_chain(struct drm_device *dev, struct drm_atomic_state *old_state,
+ enum bridge_chain_operation_type op_type)
{
struct drm_connector *connector;
struct drm_connector_state *old_conn_state, *new_conn_state;
- struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state, *new_crtc_state;
int i;
@@ -1163,32 +1164,55 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
if (WARN_ON(!encoder))
continue;
- funcs = encoder->helper_private;
-
- drm_dbg_atomic(dev, "disabling [ENCODER:%d:%s]\n",
- encoder->base.id, encoder->name);
-
/*
* Each encoder has at most one connector (since we always steal
* it away), so we won't call disable hooks twice.
*/
bridge = drm_bridge_chain_get_first_bridge(encoder);
- drm_atomic_bridge_chain_disable(bridge, old_state);
- /* Right function depends upon target state. */
- if (funcs) {
- if (funcs->atomic_disable)
- funcs->atomic_disable(encoder, old_state);
- else if (new_conn_state->crtc && funcs->prepare)
- funcs->prepare(encoder);
- else if (funcs->disable)
- funcs->disable(encoder);
- else if (funcs->dpms)
- funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
- }
+ switch (op_type) {
+ case DRM_ENCODER_BRIDGE_DISABLE:
+ funcs = encoder->helper_private;
+
+ drm_dbg_atomic(dev, "disabling [ENCODER:%d:%s]\n",
+ encoder->base.id, encoder->name);
+
+ drm_atomic_bridge_chain_disable(bridge, old_state);
+
+ /* Right function depends upon target state. */
+ if (funcs) {
+ if (funcs->atomic_disable)
+ funcs->atomic_disable(encoder, old_state);
+ else if (new_conn_state->crtc && funcs->prepare)
+ funcs->prepare(encoder);
+ else if (funcs->disable)
+ funcs->disable(encoder);
+ else if (funcs->dpms)
+ funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+ }
+
+ break;
+
+ case DRM_BRIDGE_POST_DISABLE:
+ drm_atomic_bridge_chain_post_disable(bridge, old_state);
- drm_atomic_bridge_chain_post_disable(bridge, old_state);
+ break;
+
+ default:
+ drm_err(dev, "Unrecognized Encoder/Bridge Operation (%d).\n", op_type);
+ break;
+ }
}
+}
+
+static void
+disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
+{
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *old_crtc_state, *new_crtc_state;
+ int i;
+
+ disable_encoder_brige_chain(dev, old_state, DRM_ENCODER_BRIDGE_DISABLE);
for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
const struct drm_crtc_helper_funcs *funcs;
@@ -1234,6 +1258,8 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
if (ret == 0)
drm_crtc_vblank_put(crtc);
}
+
+ disable_encoder_brige_chain(dev, old_state, DRM_BRIDGE_POST_DISABLE);
}
/**
@@ -1445,6 +1471,64 @@ static void drm_atomic_helper_commit_writebacks(struct drm_device *dev,
}
}
+static void
+enable_encoder_brige_chain(struct drm_device *dev, struct drm_atomic_state *old_state,
+ enum bridge_chain_operation_type op_type)
+{
+ struct drm_connector *connector;
+ struct drm_connector_state *new_conn_state;
+ int i;
+
+ for_each_new_connector_in_state(old_state, connector, new_conn_state, i) {
+ const struct drm_encoder_helper_funcs *funcs;
+ struct drm_encoder *encoder;
+ struct drm_bridge *bridge;
+
+ if (!new_conn_state->best_encoder)
+ continue;
+
+ if (!new_conn_state->crtc->state->active ||
+ !drm_atomic_crtc_needs_modeset(new_conn_state->crtc->state))
+ continue;
+
+ encoder = new_conn_state->best_encoder;
+
+ /*
+ * Each encoder has at most one connector (since we always steal
+ * it away), so we won't call enable hooks twice.
+ */
+ bridge = drm_bridge_chain_get_first_bridge(encoder);
+
+ switch (op_type) {
+ case DRM_BRIDGE_PRE_ENABLE:
+ drm_atomic_bridge_chain_pre_enable(bridge, old_state);
+ break;
+
+ case DRM_ENCODER_BRIDGE_ENABLE:
+ funcs = encoder->helper_private;
+
+ drm_dbg_atomic(dev, "enabling [ENCODER:%d:%s]\n",
+ encoder->base.id, encoder->name);
+
+ if (funcs) {
+ if (funcs->atomic_enable)
+ funcs->atomic_enable(encoder, old_state);
+ else if (funcs->enable)
+ funcs->enable(encoder);
+ else if (funcs->commit)
+ funcs->commit(encoder);
+ }
+
+ drm_atomic_bridge_chain_enable(bridge, old_state);
+ break;
+
+ default:
+ drm_err(dev, "Unrecognized Encoder/Bridge Operation (%d).\n", op_type);
+ break;
+ }
+ }
+}
+
/**
* drm_atomic_helper_commit_modeset_enables - modeset commit to enable outputs
* @dev: DRM device
@@ -1465,10 +1549,10 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state;
struct drm_crtc_state *new_crtc_state;
- struct drm_connector *connector;
- struct drm_connector_state *new_conn_state;
int i;
+ enable_encoder_brige_chain(dev, old_state, DRM_BRIDGE_PRE_ENABLE);
+
for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
const struct drm_crtc_helper_funcs *funcs;
@@ -1491,42 +1575,7 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
}
}
- for_each_new_connector_in_state(old_state, connector, new_conn_state, i) {
- const struct drm_encoder_helper_funcs *funcs;
- struct drm_encoder *encoder;
- struct drm_bridge *bridge;
-
- if (!new_conn_state->best_encoder)
- continue;
-
- if (!new_conn_state->crtc->state->active ||
- !drm_atomic_crtc_needs_modeset(new_conn_state->crtc->state))
- continue;
-
- encoder = new_conn_state->best_encoder;
- funcs = encoder->helper_private;
-
- drm_dbg_atomic(dev, "enabling [ENCODER:%d:%s]\n",
- encoder->base.id, encoder->name);
-
- /*
- * Each encoder has at most one connector (since we always steal
- * it away), so we won't call enable hooks twice.
- */
- bridge = drm_bridge_chain_get_first_bridge(encoder);
- drm_atomic_bridge_chain_pre_enable(bridge, old_state);
-
- if (funcs) {
- if (funcs->atomic_enable)
- funcs->atomic_enable(encoder, old_state);
- else if (funcs->enable)
- funcs->enable(encoder);
- else if (funcs->commit)
- funcs->commit(encoder);
- }
-
- drm_atomic_bridge_chain_enable(bridge, old_state);
- }
+ enable_encoder_brige_chain(dev, old_state, DRM_ENCODER_BRIDGE_ENABLE);
drm_atomic_helper_commit_writebacks(dev, old_state);
}
@@ -43,6 +43,13 @@
*/
#define DRM_PLANE_NO_SCALING (1<<16)
+enum bridge_chain_operation_type {
+ DRM_BRIDGE_PRE_ENABLE,
+ DRM_BRIDGE_POST_DISABLE,
+ DRM_ENCODER_BRIDGE_ENABLE,
+ DRM_ENCODER_BRIDGE_DISABLE,
+};
+
struct drm_atomic_state;
struct drm_private_obj;
struct drm_private_state;
Move the bridge pre_enable call before crtc enable, and the bridge post_disable call after the crtc disable. The sequence of enable after this patch will look like: bridge[n]_pre_enable ... bridge[1]_pre_enable crtc_enable encoder_enable bridge[1]_enable ... bridge[n]__enable and vice-versa for the bridge chain disable sequence. The definition of bridge pre_enable hook says that, "The display pipe (i.e. clocks and timing signals) feeding this bridge will not yet be running when this callback is called". Since CRTC is also a source feeding the bridge, it should not be enabled before the bridges in the pipeline are pre_enabled. Fix that by re-ordering the sequence of bridge pre_enable and bridge post_disable. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> --- drivers/gpu/drm/drm_atomic_helper.c | 165 ++++++++++++++++++---------- include/drm/drm_atomic_helper.h | 7 ++ 2 files changed, 114 insertions(+), 58 deletions(-)