| Message ID | 20240831-b4-rk3588-bridge-upstream-v5-1-9503bece0136@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add initial support for the Rockchip RK3588 HDMI TX Controller | expand |
On Sat, Aug 31, 2024 at 12:55:29AM +0300, Cristian Ciocaltea wrote: > Add dt-binding schema containing the common properties for the Synopsys > DesignWare HDMI QP TX controller. > > Note this is not a full dt-binding specification, but is meant to be > referenced by platform-specific bindings for this IP core. > > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> > --- > .../display/bridge/synopsys,dw-hdmi-qp.yaml | 88 ++++++++++++++++++++++ > 1 file changed, 88 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi-qp.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi-qp.yaml > new file mode 100644 > index 000000000000..771f7fba6c50 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi-qp.yaml > @@ -0,0 +1,88 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/synopsys,dw-hdmi-qp.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Common Properties for Synopsys DesignWare HDMI QP TX Controller IP > + > +maintainers: > + - Cristian Ciocaltea <cristian.ciocaltea@collabora.com> > + > +description: | > + The Synopsys DesignWare HDMI 2.1 Quad-Pixel (QP) TX Controller IP core > + supports the following features, among others: > + > + * Fixed Rate Link (FRL) > + * Display Stream Compression (DSC) > + * 4K@120Hz and 8K@60Hz video modes > + * Variable Refresh Rate (VRR) including Quick Media Switching (QMS) > + * Fast Vactive (FVA) > + * SCDC I2C DDC access > + * Multi-stream audio > + * Enhanced Audio Return Channel (EARC) > + > + Note this is not a full dt-binding specification, but is meant to be > + referenced by platform-specific bindings for this IP core. > + > +properties: > + reg: > + maxItems: 1 > + > + clocks: > + minItems: 4 > + maxItems: 6 > + items: > + - description: Peripheral/APB bus clock > + - description: EARC RX biphase clock > + - description: Reference clock > + - description: Audio interface clock > + additionalItems: true What is the usefulness of all this? How can you even be sure that each implementation of this core will have exactly these clocks? > + > + clock-names: > + minItems: 4 > + maxItems: 6 > + items: > + - const: pclk > + - const: earc > + - const: ref > + - const: aud > + additionalItems: true > + > + interrupts: > + minItems: 4 > + maxItems: 5 > + items: > + - description: AVP Unit interrupt > + - description: CEC interrupt > + - description: eARC RX interrupt > + - description: Main Unit interrupt If these are real pins, then this seems more possible, but additionalItems does not make me happy. I don't see much value in this schema and I am afraid even enforcing clock and interrupt names won't work for the second or third user. Best regards, Krzysztof
Hi, Am Samstag, 31. August 2024, 08:16:26 CEST schrieb Krzysztof Kozlowski: > On Sat, Aug 31, 2024 at 12:55:29AM +0300, Cristian Ciocaltea wrote: > > + clocks: > > + minItems: 4 > > + maxItems: 6 > > + items: > > + - description: Peripheral/APB bus clock > > + - description: EARC RX biphase clock > > + - description: Reference clock > > + - description: Audio interface clock > > + additionalItems: true > > What is the usefulness of all this? How can you even be sure that each > implementation of this core will have exactly these clocks? > > > + > > + clock-names: > > + minItems: 4 > > + maxItems: 6 > > + items: > > + - const: pclk > > + - const: earc > > + - const: ref > > + - const: aud > > + additionalItems: true > > + > > + interrupts: > > + minItems: 4 > > + maxItems: 5 > > + items: > > + - description: AVP Unit interrupt > > + - description: CEC interrupt > > + - description: eARC RX interrupt > > + - description: Main Unit interrupt > > If these are real pins, then this seems more possible, but > additionalItems does not make me happy. So while not "pins", the interrupts are separately specified in the SoC's list of interrupts in the GIC: RK3588 has: 201 irq_hdmitx0_oavp 202 irq_hdmitx0_ocec 203 irq_hdmitx0_oearcrx 204 irq_hdmitx0_omain 392 irq_hdmitx0_hpd and another set of all of them for hdmitx1 and RK3576 using the same hdmi IP has: 370 irq_hdmitx_oavp 371 irq_hdmitx_ocec 372 irq_hdmitx_oearcrx 373 irq_hdmitx_omain 399 irq_hdmitx_hpd so I guess the fifth interrupt is meant to be the hotplug? Though I guess this should be specificed in the name-list too. From the SoC's manual it looks like the controller is set up from different modules. Like AVP is the audio-video-packet-module, there is a Main and CEC Module as well as a eARC RX controller inside. I'd guess it might be possible other SoC vendors could leave out specific modules? TL;DR I think those clocks and interrupts are dependent on how the IP core was synthesized, so for now I'd think we can only guarantee that they are true for rk3588 and rk3576. So I guess they should move to the rockchip-specific part of the binding until we have more hdmi-qp controllers in the field? Heiko
On 8/31/24 4:58 PM, Heiko Stübner wrote: > Hi, > > Am Samstag, 31. August 2024, 08:16:26 CEST schrieb Krzysztof Kozlowski: >> On Sat, Aug 31, 2024 at 12:55:29AM +0300, Cristian Ciocaltea wrote: > >>> + clocks: >>> + minItems: 4 >>> + maxItems: 6 >>> + items: >>> + - description: Peripheral/APB bus clock >>> + - description: EARC RX biphase clock >>> + - description: Reference clock >>> + - description: Audio interface clock >>> + additionalItems: true >> >> What is the usefulness of all this? How can you even be sure that each >> implementation of this core will have exactly these clocks? >> >>> + >>> + clock-names: >>> + minItems: 4 >>> + maxItems: 6 >>> + items: >>> + - const: pclk >>> + - const: earc >>> + - const: ref >>> + - const: aud >>> + additionalItems: true >>> + >>> + interrupts: >>> + minItems: 4 >>> + maxItems: 5 >>> + items: >>> + - description: AVP Unit interrupt >>> + - description: CEC interrupt >>> + - description: eARC RX interrupt >>> + - description: Main Unit interrupt >> >> If these are real pins, then this seems more possible, but >> additionalItems does not make me happy. > > So while not "pins", the interrupts are separately specified in the > SoC's list of interrupts in the GIC: > > RK3588 has: > > 201 irq_hdmitx0_oavp > 202 irq_hdmitx0_ocec > 203 irq_hdmitx0_oearcrx > 204 irq_hdmitx0_omain > 392 irq_hdmitx0_hpd > > and another set of all of them for hdmitx1 > > and RK3576 using the same hdmi IP has: > > 370 irq_hdmitx_oavp > 371 irq_hdmitx_ocec > 372 irq_hdmitx_oearcrx > 373 irq_hdmitx_omain > 399 irq_hdmitx_hpd > > so I guess the fifth interrupt is meant to be the hotplug? Yep, that's for the hotplug detection. > Though I guess this should be specificed in the name-list too. My understanding from Andy was that HPD interrupt is Rockchip platform specific, hence I made it part of rockchip,rk3588-dw-hdmi-qp.yaml. > From the SoC's manual it looks like the controller is set up from > different modules. > Like AVP is the audio-video-packet-module, there is a Main and CEC Module > as well as a eARC RX controller inside. I'd guess it might be possible > other SoC vendors could leave out specific modules? > > > TL;DR I think those clocks and interrupts are dependent on how the > IP core was synthesized, so for now I'd think we can only guarantee > that they are true for rk3588 and rk3576. > > So I guess they should move to the rockchip-specific part of the binding > until we have more hdmi-qp controllers in the field? If that's the case, then we should simply drop the common binding altogether for now. Thanks, Cristian
Hi， 在 2024-09-01 05:53:39，"Cristian Ciocaltea" <cristian.ciocaltea@collabora.com> 写道： >On 8/31/24 4:58 PM, Heiko Stübner wrote: >> Hi, >> >> Am Samstag, 31. August 2024, 08:16:26 CEST schrieb Krzysztof Kozlowski: >>> On Sat, Aug 31, 2024 at 12:55:29AM +0300, Cristian Ciocaltea wrote: >> >>>> + clocks: >>>> + minItems: 4 >>>> + maxItems: 6 >>>> + items: >>>> + - description: Peripheral/APB bus clock >>>> + - description: EARC RX biphase clock >>>> + - description: Reference clock >>>> + - description: Audio interface clock >>>> + additionalItems: true >>> >>> What is the usefulness of all this? How can you even be sure that each >>> implementation of this core will have exactly these clocks? >>> >>>> + >>>> + clock-names: >>>> + minItems: 4 >>>> + maxItems: 6 >>>> + items: >>>> + - const: pclk >>>> + - const: earc >>>> + - const: ref >>>> + - const: aud >>>> + additionalItems: true >>>> + >>>> + interrupts: >>>> + minItems: 4 >>>> + maxItems: 5 >>>> + items: >>>> + - description: AVP Unit interrupt >>>> + - description: CEC interrupt >>>> + - description: eARC RX interrupt >>>> + - description: Main Unit interrupt >>> >>> If these are real pins, then this seems more possible, but >>> additionalItems does not make me happy. >> >> So while not "pins", the interrupts are separately specified in the >> SoC's list of interrupts in the GIC: >> >> RK3588 has: >> >> 201 irq_hdmitx0_oavp >> 202 irq_hdmitx0_ocec >> 203 irq_hdmitx0_oearcrx >> 204 irq_hdmitx0_omain >> 392 irq_hdmitx0_hpd >> >> and another set of all of them for hdmitx1 >> >> and RK3576 using the same hdmi IP has: >> >> 370 irq_hdmitx_oavp >> 371 irq_hdmitx_ocec >> 372 irq_hdmitx_oearcrx >> 373 irq_hdmitx_omain >> 399 irq_hdmitx_hpd The first four interrupts are export from the DW-HDMI-QP IP core。 The fifth HPD interrupts is a rockchip design。 >> >> so I guess the fifth interrupt is meant to be the hotplug? > >Yep, that's for the hotplug detection. > >> Though I guess this should be specificed in the name-list too. > >My understanding from Andy was that HPD interrupt is Rockchip platform >specific, hence I made it part of rockchip,rk3588-dw-hdmi-qp.yaml. > >> From the SoC's manual it looks like the controller is set up from >> different modules. >> Like AVP is the audio-video-packet-module, there is a Main and CEC Module >> as well as a eARC RX controller inside. I'd guess it might be possible >> other SoC vendors could leave out specific modules? >> >> >> TL;DR I think those clocks and interrupts are dependent on how the >> IP core was synthesized, so for now I'd think we can only guarantee >> that they are true for rk3588 and rk3576. >> >> So I guess they should move to the rockchip-specific part of the binding >> until we have more hdmi-qp controllers in the field? > >If that's the case, then we should simply drop the common binding >altogether for now. > >Thanks, >Cristian > >_______________________________________________ >Linux-rockchip mailing list >Linux-rockchip@lists.infradead.org >http://lists.infradead.org/mailman/listinfo/linux-rockchip
On 31/08/2024 15:58, Heiko Stübner wrote: > > so I guess the fifth interrupt is meant to be the hotplug? > Though I guess this should be specificed in the name-list too. > > From the SoC's manual it looks like the controller is set up from > different modules. > Like AVP is the audio-video-packet-module, there is a Main and CEC Module > as well as a eARC RX controller inside. I'd guess it might be possible > other SoC vendors could leave out specific modules? > > > TL;DR I think those clocks and interrupts are dependent on how the > IP core was synthesized, so for now I'd think we can only guarantee > that they are true for rk3588 and rk3576. > > So I guess they should move to the rockchip-specific part of the binding > until we have more hdmi-qp controllers in the field? Which would leave empty "common" binding. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi-qp.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi-qp.yaml new file mode 100644 index 000000000000..771f7fba6c50 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi-qp.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/synopsys,dw-hdmi-qp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Synopsys DesignWare HDMI QP TX Controller IP + +maintainers: + - Cristian Ciocaltea <cristian.ciocaltea@collabora.com> + +description: | + The Synopsys DesignWare HDMI 2.1 Quad-Pixel (QP) TX Controller IP core + supports the following features, among others: + + * Fixed Rate Link (FRL) + * Display Stream Compression (DSC) + * 4K@120Hz and 8K@60Hz video modes + * Variable Refresh Rate (VRR) including Quick Media Switching (QMS) + * Fast Vactive (FVA) + * SCDC I2C DDC access + * Multi-stream audio + * Enhanced Audio Return Channel (EARC) + + Note this is not a full dt-binding specification, but is meant to be + referenced by platform-specific bindings for this IP core. + +properties: + reg: + maxItems: 1 + + clocks: + minItems: 4 + maxItems: 6 + items: + - description: Peripheral/APB bus clock + - description: EARC RX biphase clock + - description: Reference clock + - description: Audio interface clock + additionalItems: true + + clock-names: + minItems: 4 + maxItems: 6 + items: + - const: pclk + - const: earc + - const: ref + - const: aud + additionalItems: true + + interrupts: + minItems: 4 + maxItems: 5 + items: + - description: AVP Unit interrupt + - description: CEC interrupt + - description: eARC RX interrupt + - description: Main Unit interrupt + additionalItems: true + + interrupt-names: + minItems: 4 + maxItems: 5 + items: + - const: avp + - const: cec + - const: earc + - const: main + additionalItems: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for RGB/YUV input. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Video port for HDMI/eDP output. + + required: + - port@0 + - port@1 + +additionalProperties: true
Add dt-binding schema containing the common properties for the Synopsys DesignWare HDMI QP TX controller. Note this is not a full dt-binding specification, but is meant to be referenced by platform-specific bindings for this IP core. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> --- .../display/bridge/synopsys,dw-hdmi-qp.yaml | 88 ++++++++++++++++++++++ 1 file changed, 88 insertions(+)