diff mbox series

drm/msm/dpu: Don't always set merge_3d pending flush

Message ID 20241009-mode3d-fix-v1-1-c0258354fadc@quicinc.com (mailing list archive)
State New, archived
Headers show
Series drm/msm/dpu: Don't always set merge_3d pending flush | expand

Commit Message

Jessica Zhang Oct. 10, 2024, 3:41 a.m. UTC 
Don't set the merge_3d pending flush bits if the mode_3d is
BLEND_3D_NONE.

Always flushing merge_3d can cause timeout issues when there are
multiple commits with concurrent writeback enabled.

This is because the video phys enc waits for the hw_ctl flush register
to be completely cleared [1] in its wait_for_commit_done(), but the WB
encoder always sets the merge_3d pending flush during each commit
regardless of if the merge_3d is actually active.

This means that the hw_ctl flush register will never be 0 when there are
multiple CWB commits and the video phys enc will hit vblank timeout
errors after the first CWB commit.

[1] commit fe9df3f50c39 ("drm/msm/dpu: add real wait_for_commit_done()")

Fixes: 3e79527a33a8 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250")
Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 5 ++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c  | 5 ++++-
 2 files changed, 8 insertions(+), 2 deletions(-)


---
base-commit: a20a91fb1bfac5d05ec5bcf9afe0c9363f6c8c93
change-id: 20241009-mode3d-fix-4c3c114ffeb9

Best regards,

Comments

Dmitry Baryshkov Oct. 10, 2024, 3:20 p.m. UTC | #1 
On Wed, Oct 09, 2024 at 08:41:13PM GMT, Jessica Zhang wrote:
> Don't set the merge_3d pending flush bits if the mode_3d is
> BLEND_3D_NONE.
> 
> Always flushing merge_3d can cause timeout issues when there are
> multiple commits with concurrent writeback enabled.
> 
> This is because the video phys enc waits for the hw_ctl flush register
> to be completely cleared [1] in its wait_for_commit_done(), but the WB
> encoder always sets the merge_3d pending flush during each commit
> regardless of if the merge_3d is actually active.
> 
> This means that the hw_ctl flush register will never be 0 when there are
> multiple CWB commits and the video phys enc will hit vblank timeout
> errors after the first CWB commit.

From this description, wouldn't it be more correct to always set
intf_cfg.merge_3d in WB code (even if mode_3d is NONE)?

> [1] commit fe9df3f50c39 ("drm/msm/dpu: add real wait_for_commit_done()")
> 
> Fixes: 3e79527a33a8 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250")
> Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 5 ++++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c  | 5 ++++-
>  2 files changed, 8 insertions(+), 2 deletions(-)
>
Jessica Zhang Oct. 14, 2024, 8:30 p.m. UTC | #2 
On 10/10/2024 8:20 AM, Dmitry Baryshkov wrote:
> On Wed, Oct 09, 2024 at 08:41:13PM GMT, Jessica Zhang wrote:
>> Don't set the merge_3d pending flush bits if the mode_3d is
>> BLEND_3D_NONE.
>>
>> Always flushing merge_3d can cause timeout issues when there are
>> multiple commits with concurrent writeback enabled.
>>
>> This is because the video phys enc waits for the hw_ctl flush register
>> to be completely cleared [1] in its wait_for_commit_done(), but the WB
>> encoder always sets the merge_3d pending flush during each commit
>> regardless of if the merge_3d is actually active.
>>
>> This means that the hw_ctl flush register will never be 0 when there are
>> multiple CWB commits and the video phys enc will hit vblank timeout
>> errors after the first CWB commit.
> 
>  From this description, wouldn't it be more correct to always set
> intf_cfg.merge_3d in WB code (even if mode_3d is NONE)?

Hi Dmitry,

This discussion should be addressed in [1].

Thanks,

Jessica Zhang

[1] https://patchwork.freedesktop.org/series/139824/

> 
>> [1] commit fe9df3f50c39 ("drm/msm/dpu: add real wait_for_commit_done()")
>>
>> Fixes: 3e79527a33a8 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250")
>> Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
>> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
>> ---
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 5 ++++-
>>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c  | 5 ++++-
>>   2 files changed, 8 insertions(+), 2 deletions(-)
>>
> 
> -- 
> With best wishes
> Dmitry
Dmitry Baryshkov Oct. 15, 2024, 12:43 p.m. UTC | #3 
On Wed, Oct 09, 2024 at 08:41:13PM -0700, Jessica Zhang wrote:
> Don't set the merge_3d pending flush bits if the mode_3d is
> BLEND_3D_NONE.
> 
> Always flushing merge_3d can cause timeout issues when there are
> multiple commits with concurrent writeback enabled.
> 
> This is because the video phys enc waits for the hw_ctl flush register
> to be completely cleared [1] in its wait_for_commit_done(), but the WB
> encoder always sets the merge_3d pending flush during each commit
> regardless of if the merge_3d is actually active.
> 
> This means that the hw_ctl flush register will never be 0 when there are
> multiple CWB commits and the video phys enc will hit vblank timeout
> errors after the first CWB commit.
> 
> [1] commit fe9df3f50c39 ("drm/msm/dpu: add real wait_for_commit_done()")
> 
> Fixes: 3e79527a33a8 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250")
> Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 5 ++++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c  | 5 ++++-
>  2 files changed, 8 insertions(+), 2 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index ba8878d21cf0e1945a393cca806cb64f03b16640..8864ace938e03483492e25734f834fbdd615d127 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -440,10 +440,12 @@  static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
 	struct dpu_hw_ctl *ctl;
 	const struct msm_format *fmt;
 	u32 fmt_fourcc;
+	u32 mode_3d;
 
 	ctl = phys_enc->hw_ctl;
 	fmt_fourcc = dpu_encoder_get_drm_fmt(phys_enc);
 	fmt = mdp_get_format(&phys_enc->dpu_kms->base, fmt_fourcc, 0);
+	mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
 
 	DPU_DEBUG_VIDENC(phys_enc, "\n");
 
@@ -466,7 +468,8 @@  static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
 		goto skip_flush;
 
 	ctl->ops.update_pending_flush_intf(ctl, phys_enc->hw_intf->idx);
-	if (ctl->ops.update_pending_flush_merge_3d && phys_enc->hw_pp->merge_3d)
+	if (mode_3d && ctl->ops.update_pending_flush_merge_3d &&
+	    phys_enc->hw_pp->merge_3d)
 		ctl->ops.update_pending_flush_merge_3d(ctl, phys_enc->hw_pp->merge_3d->idx);
 
 	if (ctl->ops.update_pending_flush_cdm && phys_enc->hw_cdm)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
index 882c717859cec6dfc4b646200e68a748a5294ac9..07035ab77b792e76c08eb3e18c12a4afddeac902 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
@@ -275,6 +275,7 @@  static void _dpu_encoder_phys_wb_update_flush(struct dpu_encoder_phys *phys_enc)
 	struct dpu_hw_pingpong *hw_pp;
 	struct dpu_hw_cdm *hw_cdm;
 	u32 pending_flush = 0;
+	u32 mode_3d;
 
 	if (!phys_enc)
 		return;
@@ -283,6 +284,7 @@  static void _dpu_encoder_phys_wb_update_flush(struct dpu_encoder_phys *phys_enc)
 	hw_pp = phys_enc->hw_pp;
 	hw_ctl = phys_enc->hw_ctl;
 	hw_cdm = phys_enc->hw_cdm;
+	mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
 
 	DPU_DEBUG("[wb:%d]\n", hw_wb->idx - WB_0);
 
@@ -294,7 +296,8 @@  static void _dpu_encoder_phys_wb_update_flush(struct dpu_encoder_phys *phys_enc)
 	if (hw_ctl->ops.update_pending_flush_wb)
 		hw_ctl->ops.update_pending_flush_wb(hw_ctl, hw_wb->idx);
 
-	if (hw_ctl->ops.update_pending_flush_merge_3d && hw_pp && hw_pp->merge_3d)
+	if (mode_3d && hw_ctl->ops.update_pending_flush_merge_3d &&
+	    hw_pp && hw_pp->merge_3d)
 		hw_ctl->ops.update_pending_flush_merge_3d(hw_ctl,
 				hw_pp->merge_3d->idx);