diff mbox series

[RFC,06/10] drm/panel: synaptics-r63353: don't re-activate the panel if already setup

Message ID 20241028102559.1451383-7-dario.binacchi@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series Support simple-framebuffer on imx8m | expand

Commit Message

Dario Binacchi Oct. 28, 2024, 10:25 a.m. UTC 
The patch does not re-execute the hardware initialization/activation
procedure for the panel if it is already operational.
This feature is crucial when supporting the simple framebuffer, as the
controller has already been initialized by the bootloader.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

 drivers/gpu/drm/panel/panel-synaptics-r63353.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/panel-synaptics-r63353.c b/drivers/gpu/drm/panel/panel-synaptics-r63353.c
index 169c629746c7..93e3ed545b34 100644
--- a/drivers/gpu/drm/panel/panel-synaptics-r63353.c
+++ b/drivers/gpu/drm/panel/panel-synaptics-r63353.c
@@ -258,6 +258,8 @@  static int r63353_panel_probe(struct mipi_dsi_device *dsi)
 	int ret = 0;
 	struct device *dev = &dsi->dev;
 	struct r63353_panel *panel;
+	bool initialized;
+	enum gpiod_flags rflags;
 
 	panel = devm_kzalloc(&dsi->dev, sizeof(*panel), GFP_KERNEL);
 	if (!panel)
@@ -282,7 +284,9 @@  static int r63353_panel_probe(struct mipi_dsi_device *dsi)
 	if (IS_ERR(panel->avdd))
 		return PTR_ERR(panel->avdd);
 
-	panel->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	initialized = of_property_read_bool(dev->of_node, "syna,boot-on");
+	rflags = initialized ? GPIOD_ASIS : GPIOD_OUT_LOW;
+	panel->reset_gpio = devm_gpiod_get(dev, "reset", rflags);
 	if (IS_ERR(panel->reset_gpio)) {
 		dev_err(dev, "failed to get RESET GPIO\n");
 		return PTR_ERR(panel->reset_gpio);
@@ -297,6 +301,10 @@  static int r63353_panel_probe(struct mipi_dsi_device *dsi)
 		return ret;
 
 	drm_panel_add(&panel->base);
+	if (initialized) {
+		r63353_panel_power_on(panel);
+		panel->base.prepared = true;
+	}
 
 	ret = mipi_dsi_attach(dsi);
 	if (ret < 0) {