diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index 57de1188ca2a34079578816c0c10825431d032bb..a9fb26dd27a0eb1f863707caca007f539422fc42 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,qcs615-videocc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1184,12 +1185,195 @@ camcc: clock-controller@ad00000 {
 			#power-domain-cells = <1>;
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm6150-mdss";
+			reg = <0x0 0x0ae00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
+			power-domains = <&dispcc MDSS_CORE_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x800 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm6150-dpu";
+				reg = <0x0 0x0ae01000 0x0 0x8f000>,
+				      <0x0 0x0aeb0000 0x0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-575000000 {
+						opp-hz = /bits/ 64 <575000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+
+					opp-650000000 {
+						opp-hz = /bits/ 64 <650000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm6150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,sm6150-dsi-phy-14nm";
+				reg = <0x0 0x0ae94400 0x0 0x100>,
+				      <0x0 0x0ae94500 0x0 0x300>,
+				      <0x0 0x0ae94800 0x0 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,qcs615-dispcc";
 			reg = <0 0xaf00000 0 0x20000>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>;
 
 			#clock-cells = <1>;
 			#reset-cells = <1>;
