[v2] drm/panel: visionox-rm69299: Remove redundant assignments of panel fields

Commit Message

Chen-Yu Tsai Dec. 4, 2024, 9:39 a.m. UTC

drm_panel_init() was made to initialize the fields in |struct drm_panel|.
There is no need to separately initialize them again.

Drop the separate assignments that are redundant. Also fix up any uses
of `ctx->panel.dev` to use `dev` directly.

Signed-off-by: Chen-Yu Tsai <[e-mail]>
---
Changes since v1:
- Also fix uses of `ctx->panel.dev`

 drivers/gpu/drm/panel/panel-visionox-rm69299.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

Patch

diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
index 272490b9565b..be3a9797fbce 100644
--- a/drivers/gpu/drm/panel/panel-visionox-rm69299.c
+++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
@@ -193,7 +193,6 @@  static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
 
 	mipi_dsi_set_drvdata(dsi, ctx);
 
-	ctx->panel.dev = dev;
 	ctx->dsi = dsi;
 
 	ctx->supplies[0].supply = "vdda";
@@ -201,13 +200,11 @@  static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
 	ctx->supplies[1].supply = "vdd3p3";
 	ctx->supplies[1].init_load_uA = 13200;
 
-	ret = devm_regulator_bulk_get(ctx->panel.dev, ARRAY_SIZE(ctx->supplies),
-				      ctx->supplies);
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), ctx->supplies);
 	if (ret < 0)
 		return ret;
 
-	ctx->reset_gpio = devm_gpiod_get(ctx->panel.dev,
-					 "reset", GPIOD_OUT_LOW);
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset_gpio)) {
 		dev_err(dev, "cannot get reset gpio %ld\n", PTR_ERR(ctx->reset_gpio));
 		return PTR_ERR(ctx->reset_gpio);
@@ -215,8 +212,6 @@  static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
 
 	drm_panel_init(&ctx->panel, dev, &visionox_rm69299_drm_funcs,
 		       DRM_MODE_CONNECTOR_DSI);
-	ctx->panel.dev = dev;
-	ctx->panel.funcs = &visionox_rm69299_drm_funcs;
 	drm_panel_add(&ctx->panel);
 
 	dsi->lanes = 4;