diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index d7469c565d1d..678c8aabf311 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -154,6 +154,17 @@ config DRM_PANEL_LVDS
 	  handling of power supplies or control signals. It implements automatic
 	  backlight handling if the panel is attached to a backlight controller.
 
+config DRM_PANEL_HIMAX_HX8279
+	tristate "Himax HX8279-based panels"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y if you want to enable support for panels based on the
+	  Himax HX8279 controller, such as the Startek KD070FHFID078
+	  7.0" 1200x1920 IPS LCD panel that uses a MIPI-DSI interface
+	  and others.
+
 config DRM_PANEL_HIMAX_HX83102
 	tristate "Himax HX83102-based panels"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 7dcf72646cac..d55698d7f287 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_DRM_PANEL_EBBG_FT8719) += panel-ebbg-ft8719.o
 obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o
 obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
 obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
+obj-$(CONFIG_DRM_PANEL_HIMAX_HX8279) += panel-himax-hx8279.o
 obj-$(CONFIG_DRM_PANEL_HIMAX_HX83102) += panel-himax-hx83102.o
 obj-$(CONFIG_DRM_PANEL_HIMAX_HX83112A) += panel-himax-hx83112a.o
 obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o
diff --git a/drivers/gpu/drm/panel/panel-himax-hx8279.c b/drivers/gpu/drm/panel/panel-himax-hx8279.c
new file mode 100644
index 000000000000..fda64230f6f2
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-himax-hx8279.c
@@ -0,0 +1,905 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Himax HX8279 DriverIC panels driver
+ *
+ * Copyright (c) 2025 Collabora Ltd.
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+/* Page selection */
+#define HX8279_REG_PAGE			0xb0
+ #define HX8279_PAGE_SEL		GENMASK(3, 0)
+
+/* Page 0 - Driver/Module Configuration */
+#define HX8279_P0_VGHS			0xbf
+#define HX8279_P0_VGLS			0xc0
+#define HX8279_P0_VGPHS			0xc2
+#define HX8279_P0_VGNHS			0xc4
+ #define HX8279_P0_VG_SEL		GENMASK(4, 0)
+ #define HX8279_VGH_MIN_MV		8700
+ #define HX8279_VGH_STEP_MV		300
+ #define HX8279_VGL_MIN_MV		6700
+ #define HX8279_VGL_STEP_MV		300
+ #define HX8279_VGPNH_MIN_MV		4000
+ #define HX8279_VGPNX_STEP_MV		50
+ #define HX8279_VGH_VOLT_SEL(x)		((x - HX8279_VGH_MIN_MV) / HX8279_VGH_STEP_MV)
+ #define HX8279_VGL_VOLT_SEL(x)		((x - HX8279_VGL_MIN_MV) / HX8279_VGL_STEP_MV)
+ #define HX8279_VGPN_VOLT_SEL(x)	((x - HX8279_VGPNH_MIN_MV) / HX8279_VGPNX_STEP_MV)
+
+/* Page 1 - Gate driver On Array (GOA) Timing */
+#define HX8279_P1_REG_GOA_L		0xc0
+#define HX8279_P1_REG_GOUTL(x)		(HX8279_P1_REG_GOA_L + (x))
+#define HX8279_P1_REG_GOA_R		0xd4
+#define HX8279_P1_REG_GOUTR(x)		(HX8279_P1_REG_GOA_R + (x))
+ #define HX8279_GOUT_STB		GENMASK(7, 6)
+ #define HX8279_GOUT_SEL		GENMASK(5, 0)
+
+/* Page 3 - Gate driver On Array (GOA) Configuration */
+#define HX8279_P3_REG_UNKNOWN_BA	0xba
+#define HX8279_P3_REG_GOA_STVL		0xc8
+ #define HX8279_P3_GOA_STV_LEAD		GENMASK(4, 0)
+#define HX8279_P3_REG_GOA_CKVL		0xc9
+ #define HX8279_P3_GOA_CKV_LEAD		GENMASK(4, 0)
+#define HX8279_P3_REG_GOA_CKVD		0xca
+ #define HX8279_P3_GOA_CKV_NONOVERLAP	BIT(7)
+ #define HX8279_P3_GOA_CKV_RESERVED	BIT(6)
+ #define HX8279_P3_GOA_CKV_DUMMY	GENMASK(5, 0)
+#define HX8279_P3_REG_GOA_CLR1_W_ADJ	0xd2
+#define HX8279_P3_REG_GOA_CLR234_W_ADJ	0xd3
+#define HX8279_P3_REG_GOA_CLR1_CFG	0xd4
+#define HX8279_P3_REG_GOA_CLR_CFG(x)	(HX8279_P3_REG_GOA_CLR1_CFG + x) /* CLR1..4 */
+ #define HX8279_P3_GOA_CLR_CFG_POLARITY	BIT(7)
+ #define HX8279_P3_GOA_CLR_CFG_STARTPOS	GENMASK(6, 0)
+#define HX8279_P3_REG_UNKNOWN_E4	0xe4
+#define HX8279_P3_REG_UNKNOWN_E5	0xe5
+
+/* Page 5 - MIPI */
+#define HX8279_P5_REG_TIMING		0xb3
+ #define HX8279_P5_TIMING_THS_SETTLE	GENMASK(7, 5)
+ #define HX8279_P5_TIMING_LHS_SETTLE	BIT(4)
+ #define HX8279_P5_TIMING_TLPX		GENMASK(3, 0)
+#define HX8279_P5_REG_UNKNOWN_B8	0xb8
+#define HX8279_P5_REG_UNKNOWN_BC	0xbc
+#define HX8279_P5_REG_UNKNOWN_D6	0xd6
+
+/* Page 6 - Engineer */
+#define HX8279_P6_REG_ENGINEER_PWD	0xb8
+#define HX8279_P6_REG_INHOUSE_FUNC	0xc0
+ #define HX8279_P6_ENG_UNLOCK_WORD	0xa5
+#define HX8279_P6_REG_GAMMA_CHOPPER	0xbc
+ #define HX8279_P6_GAMMA_POCGM_CTL	GENMASK(6, 4)
+ #define HX8279_P6_GAMMA_POGCMD_CTL	GENMASK(2, 0)
+#define HX8279_P6_REG_DLY_TIME_ADJ	0xd5
+
+struct hx8279 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi[2];
+	struct regulator_bulk_data vregs[2];
+	struct gpio_desc *enable_gpio;
+	struct gpio_desc *reset_gpio;
+	const struct hx8279_panel_desc *desc;
+	u8 last_page;
+	bool skip_voltage_config;
+	bool skip_goa_timing;
+	bool skip_goa_config;
+	bool skip_mipi_timing;
+	bool skip_gamma_config;
+};
+
+struct hx8279_panel_mode {
+	const struct drm_display_mode mode;
+	int bpc;
+	bool is_video_mode;
+};
+
+struct hx8279_panel_desc {
+	const char *model_name;
+	const struct mipi_dsi_device_info dsi_info;
+	const struct hx8279_panel_mode *mode_data;
+	bool is_dual_dsi;
+	u8 num_lanes;
+	u8 num_modes;
+
+	/* Page 0 */
+	unsigned int vgh_mv;
+	unsigned int vgl_mv;
+	unsigned int vgph_mv;
+	unsigned int vgnh_mv;
+
+	/* Page 1 */
+	u8 gout_l[20];
+	u8 gout_r[20];
+
+	/* Page 3 */
+	u8 goa_unk_ba;
+	u8 goa_stv_lead_time_ck;
+	u8 goa_ckv_lead_time_ck;
+	u8 goa_ckv_dummy_vblank_num;
+	bool goa_ckv_non_overlap_ctl;
+	u8 goa_clr1_width_adj;
+	u8 goa_clr234_width_adj;
+	s8 goa_clr_polarity[4];
+	int goa_clr_start_pos[4];
+	u8 goa_unk_e4;
+	u8 goa_unk_e5;
+
+	/* Page 5 */
+	u8 bta_tlpx;
+	bool lhs_settle_time_by_osc25;
+	u8 ths_settle_time;
+	u8 timing_unk_b8;
+	u8 timing_unk_bc;
+	u8 timing_unk_d6;
+
+	/* Page 6 */
+	u8 gamma_ctl;
+	u8 src_delay_time_adj_ck;
+};
+
+static inline struct hx8279 *to_hx8279(struct drm_panel *panel)
+{
+	return container_of(panel, struct hx8279, panel);
+}
+
+static int hx8279_set_page(struct hx8279 *hx,
+			   struct mipi_dsi_multi_context *dsi_ctx, u8 page)
+{
+	const u8 cmd_set_page[] = { HX8279_REG_PAGE, page };
+
+	if (hx->last_page == page)
+		return 0;
+
+	mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_page, ARRAY_SIZE(cmd_set_page));
+	if (!dsi_ctx->accum_err)
+		hx->last_page = page;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int hx8279_set_module_config(struct hx8279 *hx,
+				    struct mipi_dsi_multi_context *dsi_ctx)
+{
+	const struct hx8279_panel_desc *desc = hx->desc;
+	u8 cmd_set_voltage[2];
+	int ret;
+
+	if (hx->skip_voltage_config)
+		return 0;
+
+	/* Page 0 - Driver/Module Configuration */
+	ret = hx8279_set_page(hx, dsi_ctx, 0);
+	if (ret)
+		return ret;
+
+	if (desc->vgh_mv) {
+		cmd_set_voltage[0] = HX8279_P0_VGHS;
+		cmd_set_voltage[1] = HX8279_VGH_VOLT_SEL(desc->vgh_mv);
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_voltage,
+					     ARRAY_SIZE(cmd_set_voltage));
+	}
+
+	if (desc->vgl_mv) {
+		cmd_set_voltage[0] = HX8279_P0_VGLS;
+		cmd_set_voltage[1] = HX8279_VGL_VOLT_SEL(desc->vgl_mv);
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_voltage,
+					     ARRAY_SIZE(cmd_set_voltage));
+	}
+
+	if (desc->vgph_mv) {
+		cmd_set_voltage[0] = HX8279_P0_VGPHS;
+		cmd_set_voltage[1] = HX8279_VGPN_VOLT_SEL(desc->vgph_mv);
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_voltage,
+					     ARRAY_SIZE(cmd_set_voltage));
+	}
+
+	if (desc->vgnh_mv) {
+		cmd_set_voltage[0] = HX8279_P0_VGNHS;
+		cmd_set_voltage[1] = HX8279_VGPN_VOLT_SEL(desc->vgnh_mv);
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_voltage,
+					     ARRAY_SIZE(cmd_set_voltage));
+	}
+
+	return 0;
+}
+
+static int hx8279_set_gout(struct hx8279 *hx,
+			   struct mipi_dsi_multi_context *dsi_ctx)
+{
+	const struct hx8279_panel_desc *desc = hx->desc;
+	u8 cmd_set_gout[2];
+	int i, ret;
+
+	if (hx->skip_goa_timing)
+		return 0;
+
+	ret = hx8279_set_page(hx, dsi_ctx, 1);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(desc->gout_l); i++) {
+		cmd_set_gout[0] = HX8279_P1_REG_GOUTL(i);
+		cmd_set_gout[1] = desc->gout_l[i];
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_gout,
+					     ARRAY_SIZE(cmd_set_gout));
+	}
+
+	for (i = 0; i < ARRAY_SIZE(desc->gout_r); i++) {
+		cmd_set_gout[0] = HX8279_P1_REG_GOUTR(i);
+		cmd_set_gout[1] = desc->gout_r[i];
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_gout,
+					     ARRAY_SIZE(cmd_set_gout));
+	}
+
+	return 0;
+}
+
+static int hx8279_set_goa_cfg(struct hx8279 *hx,
+			      struct mipi_dsi_multi_context *dsi_ctx)
+{
+	const struct hx8279_panel_desc *desc = hx->desc;
+	u8 cmd_set_goa[2];
+	int i, ret;
+
+	if (hx->skip_goa_config)
+		return 0;
+
+	ret = hx8279_set_page(hx, dsi_ctx, 3);
+	if (ret)
+		return ret;
+
+	if (desc->goa_unk_ba)  {
+		cmd_set_goa[0] = HX8279_P3_REG_UNKNOWN_BA;
+		cmd_set_goa[1] = desc->goa_unk_ba;
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_goa,
+					     ARRAY_SIZE(cmd_set_goa));
+	}
+
+	if (desc->goa_stv_lead_time_ck) {
+		cmd_set_goa[0] = HX8279_P3_REG_GOA_STVL;
+		cmd_set_goa[1] = FIELD_PREP(HX8279_P3_GOA_STV_LEAD,
+					    desc->goa_stv_lead_time_ck);
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_goa,
+					     ARRAY_SIZE(cmd_set_goa));
+	}
+
+	if (desc->goa_ckv_lead_time_ck) {
+		cmd_set_goa[0] = HX8279_P3_REG_GOA_CKVL;
+		cmd_set_goa[1] = FIELD_PREP(HX8279_P3_GOA_CKV_DUMMY,
+					    desc->goa_ckv_lead_time_ck);
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_goa,
+					     ARRAY_SIZE(cmd_set_goa));
+	}
+
+	if (desc->goa_ckv_dummy_vblank_num) {
+		cmd_set_goa[0] = HX8279_P3_REG_GOA_CKVD;
+		cmd_set_goa[1] = FIELD_PREP(HX8279_P3_GOA_CKV_LEAD,
+					    desc->goa_ckv_dummy_vblank_num);
+		cmd_set_goa[1] |= FIELD_PREP(HX8279_P3_GOA_CKV_NONOVERLAP,
+					     desc->goa_ckv_non_overlap_ctl);
+		/* RESERVED must be always set */
+		cmd_set_goa[1] |= HX8279_P3_GOA_CKV_RESERVED;
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_goa,
+					     ARRAY_SIZE(cmd_set_goa));
+	}
+
+	if (desc->goa_clr1_width_adj) {
+		cmd_set_goa[0] = HX8279_P3_REG_GOA_CLR1_W_ADJ;
+		cmd_set_goa[1] = desc->goa_clr1_width_adj;
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_goa,
+					     ARRAY_SIZE(cmd_set_goa));
+	}
+
+	if (desc->goa_clr234_width_adj) {
+		cmd_set_goa[0] = HX8279_P3_REG_GOA_CLR234_W_ADJ;
+		cmd_set_goa[1] = desc->goa_clr234_width_adj;
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_goa,
+					     ARRAY_SIZE(cmd_set_goa));
+	}
+
+	/* Polarity and Start Position arrays are of the same size */
+	for (i = 0; i < ARRAY_SIZE(desc->goa_clr_polarity); i++) {
+		if (desc->goa_clr_polarity[i] < 0 || desc->goa_clr_start_pos[i] < 0)
+			continue;
+
+		cmd_set_goa[0] = HX8279_P3_REG_GOA_CLR_CFG(i);
+		cmd_set_goa[1] = FIELD_PREP(HX8279_P3_GOA_CLR_CFG_STARTPOS,
+					    desc->goa_clr_start_pos[i]);
+		cmd_set_goa[1] |= FIELD_PREP(HX8279_P3_GOA_CLR_CFG_POLARITY,
+					     desc->goa_clr_polarity[i]);
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_goa,
+					     ARRAY_SIZE(cmd_set_goa));
+	}
+
+	if (desc->goa_unk_e4) {
+		cmd_set_goa[0] = HX8279_P3_REG_UNKNOWN_E4;
+		cmd_set_goa[1] = desc->goa_unk_e4;
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_goa,
+					     ARRAY_SIZE(cmd_set_goa));
+	}
+
+	cmd_set_goa[0] = HX8279_P3_REG_UNKNOWN_E5;
+	cmd_set_goa[1] = desc->goa_unk_e5;
+	mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_goa,
+				     ARRAY_SIZE(cmd_set_goa));
+
+	return 0;
+}
+
+static int hx8279_set_mipi_cfg(struct hx8279 *hx,
+			       struct mipi_dsi_multi_context *dsi_ctx)
+{
+	const struct hx8279_panel_desc *desc = hx->desc;
+	u8 cmd_set_mipi[2];
+	int ret;
+
+	if (hx->skip_mipi_timing)
+		return 0;
+
+	ret = hx8279_set_page(hx, dsi_ctx, 5);
+	if (ret)
+		return ret;
+
+	if (desc->bta_tlpx || desc->ths_settle_time || desc->lhs_settle_time_by_osc25) {
+		cmd_set_mipi[0] = HX8279_P5_REG_TIMING;
+		cmd_set_mipi[1] = FIELD_PREP(HX8279_P5_TIMING_TLPX, desc->bta_tlpx);
+		cmd_set_mipi[1] |= FIELD_PREP(HX8279_P5_TIMING_THS_SETTLE,
+					      desc->ths_settle_time);
+		cmd_set_mipi[1] |= FIELD_PREP(HX8279_P5_TIMING_LHS_SETTLE,
+					      desc->lhs_settle_time_by_osc25);
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_mipi,
+					     ARRAY_SIZE(cmd_set_mipi));
+	}
+
+	if (desc->timing_unk_b8) {
+		cmd_set_mipi[0] = HX8279_P5_REG_UNKNOWN_B8;
+		cmd_set_mipi[1] = desc->timing_unk_b8;
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_mipi,
+					     ARRAY_SIZE(cmd_set_mipi));
+	}
+
+	if (desc->timing_unk_bc) {
+		cmd_set_mipi[0] = HX8279_P5_REG_UNKNOWN_BC;
+		cmd_set_mipi[1] = desc->timing_unk_bc;
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_mipi,
+					     ARRAY_SIZE(cmd_set_mipi));
+	}
+
+	if (desc->timing_unk_d6) {
+		cmd_set_mipi[0] = HX8279_P5_REG_UNKNOWN_D6;
+		cmd_set_mipi[1] = desc->timing_unk_d6;
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_mipi,
+					     ARRAY_SIZE(cmd_set_mipi));
+	}
+
+	return 0;
+}
+
+static int hx8279_set_adv_cfg(struct hx8279 *hx,
+			      struct mipi_dsi_multi_context *dsi_ctx)
+{
+	const struct hx8279_panel_desc *desc = hx->desc;
+	const u8 cmd_set_gamma[] = { HX8279_P6_REG_GAMMA_CHOPPER, desc->gamma_ctl };
+	const u8 cmd_set_dly[] = { HX8279_P6_REG_DLY_TIME_ADJ, desc->src_delay_time_adj_ck };
+	u8 cmd_set_eng[] = { HX8279_P6_REG_ENGINEER_PWD, HX8279_P6_ENG_UNLOCK_WORD };
+	int ret;
+
+	if (!desc->gamma_ctl && !desc->src_delay_time_adj_ck)
+		return 0;
+
+	ret = hx8279_set_page(hx, dsi_ctx, 6);
+	if (ret)
+		return ret;
+
+	/* Unlock ENG settings: write same word to both ENGINEER_PWD and INHOUSE_FUNC */
+	mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_eng, ARRAY_SIZE(cmd_set_eng));
+
+	cmd_set_eng[0] = HX8279_P6_REG_INHOUSE_FUNC;
+	mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_eng, ARRAY_SIZE(cmd_set_eng));
+
+	/* Set Gamma Chopper and Gamma buffer Chopper control */
+	if (desc->gamma_ctl)
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_gamma,
+					     ARRAY_SIZE(cmd_set_gamma));
+
+	/* Set Source delay time adjustment (CKV falling to Source off) */
+	if (desc->src_delay_time_adj_ck)
+		mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_dly,
+					     ARRAY_SIZE(cmd_set_dly));
+
+	/* Lock ENG settings again */
+	cmd_set_eng[0] = HX8279_P6_REG_ENGINEER_PWD;
+	cmd_set_eng[1] = 0;
+	mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_eng, ARRAY_SIZE(cmd_set_eng));
+
+	cmd_set_eng[0] = HX8279_P6_REG_INHOUSE_FUNC;
+	mipi_dsi_generic_write_multi(dsi_ctx, cmd_set_eng, ARRAY_SIZE(cmd_set_eng));
+
+	return 0;
+}
+
+static int hx8279_on(struct hx8279 *hx)
+{
+	struct mipi_dsi_device *dsi = hx->dsi[0];
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+	int ret;
+
+	/* Page 5 */
+	ret = hx8279_set_mipi_cfg(hx, &dsi_ctx);
+	if (ret)
+		return ret;
+
+	/* Page 1 */
+	ret = hx8279_set_gout(hx, &dsi_ctx);
+	if (ret)
+		return ret;
+
+	/* Page 3 */
+	ret = hx8279_set_goa_cfg(hx, &dsi_ctx);
+	if (ret)
+		return ret;
+
+	/* Page 0 - Driver/Module Configuration */
+	ret = hx8279_set_module_config(hx, &dsi_ctx);
+	if (ret)
+		return ret;
+
+	/* Page 6 */
+	ret = hx8279_set_adv_cfg(hx, &dsi_ctx);
+	if (ret)
+		return ret;
+
+	if (dsi_ctx.accum_err)
+		return dsi_ctx.accum_err;
+
+	return 0;
+}
+
+static void hx8279_power_off(struct hx8279 *hx)
+{
+	gpiod_set_value_cansleep(hx->reset_gpio, 0);
+	usleep_range(100, 500);
+	gpiod_set_value_cansleep(hx->enable_gpio, 0);
+	regulator_bulk_disable(ARRAY_SIZE(hx->vregs), hx->vregs);
+}
+
+static int hx8279_disable(struct drm_panel *panel)
+{
+	struct hx8279 *hx = to_hx8279(panel);
+	struct mipi_dsi_device *dsi = hx->dsi[0];
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+
+	return 0;
+}
+
+static int hx8279_enable(struct drm_panel *panel)
+{
+	struct hx8279 *hx = to_hx8279(panel);
+	struct mipi_dsi_device *dsi = hx->dsi[0];
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+
+	return 0;
+}
+
+static int hx8279_prepare(struct drm_panel *panel)
+{
+	struct hx8279 *hx = to_hx8279(panel);
+	struct mipi_dsi_device *dsi = hx->dsi[0];
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hx->vregs), hx->vregs);
+	if (ret)
+		return ret;
+
+	gpiod_set_value_cansleep(hx->enable_gpio, 1);
+	usleep_range(5000, 6000);
+	gpiod_set_value_cansleep(hx->reset_gpio, 1);
+	usleep_range(6000, 7000);
+
+	ret = hx8279_on(hx);
+	if (ret) {
+		hx8279_power_off(hx);
+		return ret;
+	}
+
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 130);
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+	if (hx->dsi[1])
+		hx->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static int hx8279_unprepare(struct drm_panel *panel)
+{
+	struct hx8279 *hx = to_hx8279(panel);
+	struct mipi_dsi_device *dsi = hx->dsi[0];
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+	if (hx->dsi[1])
+		hx->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 130);
+
+	hx8279_power_off(hx);
+	return 0;
+}
+
+static int hx8279_get_modes(struct drm_panel *panel, struct drm_connector *connector)
+{
+	struct hx8279 *hx = to_hx8279(panel);
+	int i;
+
+	for (i = 0; i < hx->desc->num_modes; i++) {
+		struct drm_display_mode *mode;
+
+		mode = drm_mode_duplicate(connector->dev, &hx->desc->mode_data[i].mode);
+		if (!mode)
+			return -ENOMEM;
+
+		drm_mode_set_name(mode);
+
+		mode->type |= DRM_MODE_TYPE_DRIVER;
+		if (hx->desc->num_modes == 1)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+		drm_mode_probed_add(connector, mode);
+	}
+
+	connector->display_info.bpc = hx->desc->mode_data[0].bpc;
+	connector->display_info.height_mm = hx->desc->mode_data[0].mode.height_mm;
+	connector->display_info.width_mm = hx->desc->mode_data[0].mode.width_mm;
+
+	return hx->desc->num_modes;
+}
+
+static const struct drm_panel_funcs hx8279_panel_funcs = {
+	.disable = hx8279_disable,
+	.unprepare = hx8279_unprepare,
+	.prepare = hx8279_prepare,
+	.enable = hx8279_enable,
+	.get_modes = hx8279_get_modes,
+};
+
+static int hx8279_init_vregs(struct hx8279 *hx, struct device *dev)
+{
+	int ret;
+
+	hx->vregs[0].supply = "vdd";
+	hx->vregs[1].supply = "iovcc";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hx->vregs),
+				      hx->vregs);
+	if (ret < 0)
+		return ret;
+
+	ret = regulator_is_supported_voltage(hx->vregs[0].consumer,
+					     3000000, 5000000);
+	if (!ret)
+		return -EINVAL;
+
+	ret = regulator_is_supported_voltage(hx->vregs[1].consumer,
+					     1700000, 1900000);
+	if (!ret)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int hx8279_check_config(struct hx8279 *hx, struct device *dev)
+{
+	const struct hx8279_panel_desc *desc = hx->desc;
+	int i, num_clr, num_zero;
+
+	/* Voltages config validation */
+	if (!desc->vgh_mv && !desc->vgl_mv && !desc->vgph_mv && !desc->vgnh_mv)
+		hx->skip_voltage_config = true;
+	else if ((desc->vgh_mv && desc->vgh_mv < HX8279_VGH_MIN_MV) ||
+		 (desc->vgl_mv && desc->vgl_mv < HX8279_VGL_MIN_MV) ||
+		 (desc->vgph_mv && desc->vgph_mv < HX8279_VGPNH_MIN_MV) ||
+		 (desc->vgnh_mv && desc->vgnh_mv < HX8279_VGPNH_MIN_MV))
+			return -EINVAL;
+
+	/* GOA Timing validation */
+	num_zero = 1;
+	for (i = 0; i < ARRAY_SIZE(desc->gout_l); i++) {
+		if (!desc->gout_l[i])
+			num_zero++;
+		else if (desc->gout_l[i] > (HX8279_GOUT_STB | HX8279_GOUT_SEL))
+			return dev_err_probe(dev, -EINVAL,
+					     "Invalid value found in gout_l[%d]\n", i);
+	}
+	if (num_zero >= ARRAY_SIZE(desc->gout_l))
+		hx->skip_goa_timing = true;
+
+	if (!hx->skip_goa_timing) {
+		num_zero = 1;
+		for (i = 0; i < ARRAY_SIZE(desc->gout_r); i++) {
+			if (!desc->gout_r[i])
+				num_zero++;
+			else if (desc->gout_r[i] > (HX8279_GOUT_STB | HX8279_GOUT_SEL))
+				return dev_err_probe(dev, -EINVAL,
+						     "Invalid value found in gout_r[%d]\n", i);
+		}
+		if (num_zero >= ARRAY_SIZE(desc->gout_r))
+			hx->skip_goa_timing = true;
+	}
+
+	/* GOA Configuration validation */
+	if (!desc->goa_unk_ba && !desc->goa_stv_lead_time_ck &&
+	    !desc->goa_ckv_lead_time_ck && !desc->goa_ckv_dummy_vblank_num &&
+	    !desc->goa_clr1_width_adj && !desc->goa_clr234_width_adj &&
+	    !desc->goa_unk_e4 && !desc->goa_unk_e5)
+		hx->skip_goa_config = true;
+
+	if (!hx->skip_goa_config) {
+		if ((desc->goa_stv_lead_time_ck > HX8279_P3_GOA_STV_LEAD) ||
+		    (desc->goa_ckv_lead_time_ck > HX8279_P3_GOA_CKV_LEAD) ||
+		    (desc->goa_ckv_dummy_vblank_num > HX8279_P3_GOA_CKV_DUMMY))
+			return dev_err_probe(dev, -EINVAL,
+					     "Invalid lead timings in GOA config\n");
+		/*
+		 * Don't perform zero check for polarity and start position, as
+		 * both pol=0 and start=0 are valid configuration values.
+		 */
+		num_clr = 0;
+		for (i = 0; i < ARRAY_SIZE(desc->goa_clr_start_pos); i++) {
+			if (desc->goa_clr_start_pos[i] < 0)
+				continue;
+			else if (desc->goa_clr_start_pos[i] > HX8279_P3_GOA_CLR_CFG_STARTPOS)
+				return dev_err_probe(dev, -EINVAL,
+						     "Invalid start position for CLR%d\n", i + 1);
+			else
+				num_clr++;
+		}
+		if (!num_clr)
+			return -EINVAL;
+
+		for (i = 0; i < ARRAY_SIZE(desc->goa_clr_polarity); i++) {
+			if (num_clr < 0)
+				return -EINVAL;
+
+			if (desc->goa_clr_polarity[i] < 0)
+				continue;
+			else if (desc->goa_clr_polarity[i] > 1)
+				return dev_err_probe(dev, -EINVAL,
+						     "Invalid polarity for CLR%d\n", i + 1);
+			else
+				num_clr--;
+		}
+	}
+
+	/* MIPI Configuration validation */
+	if (!desc->bta_tlpx && !desc->lhs_settle_time_by_osc25 &&
+	    !desc->ths_settle_time && !desc->timing_unk_b8 &&
+	    !desc->timing_unk_bc && !desc->timing_unk_d6)
+		hx->skip_mipi_timing = true;
+
+	/* Gamma Configuration validation */
+	if (desc->gamma_ctl > (HX8279_P6_GAMMA_POCGM_CTL | HX8279_P6_GAMMA_POGCMD_CTL))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int hx8279_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct hx8279 *hx;
+	int i, num_dsis = 1, ret;
+
+	hx = devm_kzalloc(dev, sizeof(*hx), GFP_KERNEL);
+	if (!hx)
+		return -ENOMEM;
+
+	ret = hx8279_init_vregs(hx, dev);
+	if (ret)
+		return ret;
+
+	hx->desc = device_get_match_data(dev);
+	if (!hx->desc)
+		return -ENODEV;
+
+	/*
+	 * In some DriverICs some or all fields may be OTP: perform a
+	 * basic configuration check before writing to help avoiding
+	 * irreparable mistakes.
+	 *
+	 * Please note that this is not perfect and will only check if
+	 * the values may be plausible; values that are wrong for a
+	 * specific display, but still plausible for DrIC config will
+	 * be accepted.
+	 */
+	ret = hx8279_check_config(hx, dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Invalid DriverIC configuration\n");
+
+	/* The enable line may be always tied to VCCIO, so this is optional */
+	hx->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_ASIS);
+	if (IS_ERR(hx->enable_gpio))
+		return dev_err_probe(dev, PTR_ERR(hx->enable_gpio),
+				     "Failed to get enable GPIO\n");
+
+	hx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
+	if (IS_ERR(hx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(hx->reset_gpio),
+				     "Failed to get reset GPIO\n");
+
+	/* If the panel is connected on two DSIs then DSI0 left, DSI1 right */
+	if (hx->desc->is_dual_dsi) {
+		const struct mipi_dsi_device_info *info = &hx->desc->dsi_info;
+		struct mipi_dsi_host *dsi_r_host;
+		struct device_node *dsi_r;
+
+		dsi_r = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
+		if (!dsi_r)
+			return dev_err_probe(dev, -ENODEV, "Cannot get secondary DSI node.\n");
+
+		dsi_r_host = of_find_mipi_dsi_host_by_node(dsi_r);
+		of_node_put(dsi_r);
+		if (!dsi_r_host)
+			return dev_err_probe(dev, -EPROBE_DEFER,
+					     "Cannot get secondary DSI host\n");
+
+		hx->dsi[1] = devm_mipi_dsi_device_register_full(dev, dsi_r_host, info);
+		if (IS_ERR(hx->dsi[1]))
+			return dev_err_probe(dev, PTR_ERR(hx->dsi[1]),
+					     "Cannot get secondary DSI node\n");
+		num_dsis++;
+		mipi_dsi_set_drvdata(hx->dsi[1], hx);
+	}
+
+	hx->dsi[0] = dsi;
+	mipi_dsi_set_drvdata(dsi, hx);
+
+	drm_panel_init(&hx->panel, dev, &hx8279_panel_funcs, DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&hx->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	drm_panel_add(&hx->panel);
+
+	for (i = 0; i < num_dsis; i++) {
+		hx->dsi[i]->lanes = hx->desc->num_lanes;
+		hx->dsi[i]->format = MIPI_DSI_FMT_RGB888;
+
+		hx->dsi[i]->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
+					 MIPI_DSI_MODE_LPM;
+
+		if (hx->desc->mode_data[0].is_video_mode)
+			hx->dsi[i]->mode_flags |= MIPI_DSI_MODE_VIDEO |
+						  MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+		ret = devm_mipi_dsi_attach(dev, hx->dsi[i]);
+		if (ret < 0)
+			return dev_err_probe(dev, ret,
+					     "Cannot attach to DSI%d host.\n", i);
+	}
+
+	/* Make sure we start in a known state: panel off */
+	gpiod_set_value_cansleep(hx->reset_gpio, 0);
+	gpiod_set_value_cansleep(hx->enable_gpio, 0);
+
+	return 0;
+}
+
+static void hx8279_remove(struct mipi_dsi_device *dsi)
+{
+	struct hx8279 *hx = mipi_dsi_get_drvdata(dsi);
+
+	drm_panel_remove(&hx->panel);
+}
+
+static const struct hx8279_panel_mode startek_kd070fhfid078_modes[] = {
+	{
+		.mode = {
+			.clock = 156458,
+			.hdisplay = 1200,
+			.hsync_start = 1200 + 50,
+			.hsync_end = 1200 + 50 + 24,
+			.htotal = 1200 + 50 + 24 + 66,
+			.vdisplay = 1920,
+			.vsync_start = 1920 + 14,
+			.vsync_end = 1920 + 14 + 2,
+			.vtotal = 1920 + 14 + 2 + 10,
+			.width_mm = 95,
+			.height_mm = 151,
+			.type = DRM_MODE_TYPE_DRIVER
+		},
+		.bpc = 8,
+		.is_video_mode = true,
+	},
+};
+
+static const struct hx8279_panel_desc startek_kd070fhfid078 = {
+	.model_name = "Startek KD070FHFID078",
+	.dsi_info = {
+		.type = "KD070FHFID078",
+		.channel = 0,
+		.node = NULL,
+	},
+	.mode_data = startek_kd070fhfid078_modes,
+	.num_modes = ARRAY_SIZE(startek_kd070fhfid078_modes),
+	.num_lanes = 4,
+
+	/* Driver/Module Configuration: LC Matrix voltages */
+	.vgh_mv = 18000,
+	.vgl_mv = 12100,
+	.vgph_mv = 5500,
+	.vgnh_mv = 5500,
+
+	/* Gate driver On Array (GOA) Timing */
+	.gout_l = { 0xd, 0xd, 0x6, 0x6, 0x8, 0x8, 0xa, 0xa, 0xc, 0xc,
+		    0x0, 0x0, 0xe, 0xe, 0x1, 0x1, 0x4, 0x4, 0x0, 0x0 },
+	.gout_r = { 0xd, 0xd, 0x5, 0x5, 0x7, 0x7, 0x9, 0x9, 0xb, 0xb,
+		    0x0, 0x0, 0xe, 0xe, 0x1, 0x1, 0x3, 0x3, 0x0, 0x0 },
+
+	/* Gate driver On Array (GOA) Configuration */
+	.goa_unk_ba = 0xf0,
+	.goa_stv_lead_time_ck = 7,
+	.goa_ckv_lead_time_ck = 3,
+	.goa_ckv_dummy_vblank_num = 1,
+	.goa_clr1_width_adj = 1,
+	.goa_clr234_width_adj = 5,
+	.goa_clr_polarity = { 0, 1, -1, -1 },
+	.goa_clr_start_pos = { 5, 10, -1, -1 },
+	.goa_unk_e4 = 0xc0,
+	.goa_unk_e5 = 0x00,
+
+	/* MIPI Configuration */
+	.bta_tlpx = 2,
+	.lhs_settle_time_by_osc25 = true,
+	.ths_settle_time = 2,
+	.timing_unk_b8 = 0x7f,
+	.timing_unk_bc = 0x20,
+	.timing_unk_d6 = 0x7f,
+
+	/* ENG/Gamma Configuration */
+	.gamma_ctl = FIELD_PREP_CONST(HX8279_P6_GAMMA_POCGM_CTL, 1) |
+		     FIELD_PREP_CONST(HX8279_P6_GAMMA_POGCMD_CTL, 1),
+	.src_delay_time_adj_ck = 72,
+};
+
+static const struct of_device_id hx8279_of_match[] = {
+	{ .compatible = "startek,kd070fhfid078", .data = &startek_kd070fhfid078 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, hx8279_of_match);
+
+static struct mipi_dsi_driver hx8279_driver = {
+	.probe = hx8279_probe,
+	.remove = hx8279_remove,
+	.driver = {
+		.name = "panel-himax-hx8279",
+		.of_match_table = hx8279_of_match,
+	},
+};
+module_mipi_dsi_driver(hx8279_driver);
+
+MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>");
+MODULE_DESCRIPTION("Himax HX8279 DriverIC panels driver");
+MODULE_LICENSE("GPL");
