[11/14] arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM

Message ID	20250224-initial_display-v1-11-5ccbbf613543@gocontroll.com (mailing list archive)
State	New
Headers	show Return-Path: <dri-devel-bounces@lists.freedesktop.org> From: Maud Spierings via B4 Relay <devnull+maudspierings.gocontroll.com@kernel.org> Date: Mon, 24 Feb 2025 14:51:01 +0100 Subject: [PATCH 11/14] arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Message-Id: <20250224-initial_display-v1-11-5ccbbf613543@gocontroll.com> References: <20250224-initial_display-v1-0-5ccbbf613543@gocontroll.com> In-Reply-To: <20250224-initial_display-v1-0-5ccbbf613543@gocontroll.com> To: Neil Armstrong <neil.armstrong@linaro.org>, Jessica Zhang <quic_jesszhan@quicinc.com>, Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Maxime Ripard <mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>, David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley <conor+dt@kernel.org>, Thierry Reding <thierry.reding@gmail.com>, Sam Ravnborg <sam@ravnborg.org>, Liu Ying <victor.liu@nxp.com>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com> Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, Maud Spierings <maudspierings@gocontroll.com> Precedence: list Reply-To: maudspierings@gocontroll.com Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" <dri-devel-bounces@lists.freedesktop.org>
Series	arm64: dts: freescale: Add support for the GOcontroll Moduline Display \| expand [00/14] arm64: dts: freescale: Add support for the GOcontroll Moduline Display [01/14] dt-bindings: display: simple: add BOE AV101HDT-A10 panel [02/14] dt-bindings: display: simple: Add BOE AV123Z7M-N17 panel [03/14] dt-bindings: arm: fsl: Add GOcontroll Moduline Display [04/14] dt-bindings: vendor-prefixes: add GOcontroll [05/14] dt-bindings: trivial-devices: add GOcontroll Moduline IO modules [06/14] arm64: dts: imx8mp: Add pinctrl config definitions [07/14] drm/panel: simple: add BOE AV101HDT-A10 panel [08/14] drm/panel: simple: Add BOE AV123Z7M-N17 panel [09/14] MAINTAINERS: add maintainer for the Ka-Ro tx8p-ml81 COM module [10/14] MAINTAINERS: add maintainer for the GOcontroll Moduline controllers [11/14] arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM [12/14] arm64: dts: freescale: Add the GOcontroll Moduline Display baseboard [13/14] arm64: dts: freescale: Add the BOE av101hdt-a10 variant of the Moduline Display [14/14] arm64: dts: freescale: Add the BOE av123z7m-n17 variant of the Moduline Display

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..3c29265c3f0db87c8315aedc7386d58eb6bec6b8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi @@ -0,0 +1,547 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2020 Lothar Waßmann <LW@KARO-electronics.de> + * 2025 Maud Spierings <maudspierings@gocontroll.com> + */ + +#include "imx8mp.dtsi" + +/ { + /* PHY regulator */ + regulator-3v3-etn { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_3v3_etn>; + regulator-name = "3v3-etn"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&reg_vdd_3v3>; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; +}; + +&A53_0 { + cpu-supply = <&reg_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <&reg_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <&reg_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <&reg_vdd_arm>; +}; + + +&eqos { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_eqos>; + pinctrl-1 = <&pinctrl_eqos_sleep>; + assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, + <&clk IMX8MP_CLK_ENET_QOS_TIMER>, + <&clk IMX8MP_CLK_ENET_QOS>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, + <&clk IMX8MP_SYS_PLL2_100M>, + <&clk IMX8MP_SYS_PLL2_50M>; + assigned-clock-rates = <0>, <100000000>, <50000000>; + phy-mode = "rmii"; + phy-handle = <&ethphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ethphy_rst_b>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + reset-delay-us = <25000>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ethphy_int_b>; + interrupt-parent = <&gpio4>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk IMX8MP_CLK_ENET_QOS>; + smsc,disable-energy-detect; + }; + }; +}; + +&gpio1 { + gpio-line-names = "SODIMM_152", + "SODIMM_42", + "PMIC_WDOG_B SODIMM_153", + "PMIC_IRQ_B", + "SODIMM_154", + "SODIMM_155", + "SODIMM_156", + "SODIMM_157", + "SODIMM_158", + "SODIMM_159", + "SODIMM_161", + "SODIMM_162", + "SODIMM_34", + "SODIMM_36", + "SODIMM_27", + "SODIMM_28", + "ENET_MDC", + "ENET_MDIO", + "", + "ENET_XTAL1/CLKIN", + "ENET_TXD1", + "ENET_TXD0", + "ENET_TXEN", + "ENET_POWER", + "ENET_COL/CRS_DV", + "ENET_RXER", + "ENET_RXD0", + "ENET_RXD1", + "", + "", + "", + ""; +}; + +&gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_51", + "SODIMM_57", + "SODIMM_56", + "SODIMM_52", + "SODIMM_53", + "SODIMM_54", + "SODIMM_55", + "SODIMM_15", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +&gpio3 { + gpio-line-names = "", + "", + "EMMC_DS", + "EMMC_DAT5", + "EMMC_DAT6", + "EMMC_DAT7", + "", + "", + "", + "", + "EMMC_DAT0", + "EMMC_DAT1", + "EMMC_DAT2", + "EMMC_DAT3", + "", + "EMMC_DAT4", + "", + "EMMC_CLK", + "EMMC_CMD", + "SODIMM_75", + "SODIMM_145", + "SODIMM_163", + "SODIMM_164", + "SODIMM_165", + "SODIMM_143", + "SODIMM_144", + "SODIMM_72", + "SODIMM_73", + "SODIMM_74", + "SODIMM_93", + "", + ""; +}; + +&gpio4 { + gpio-line-names = "SODIMM_98", + "SODIMM_99", + "SODIMM_100", + "SODIMM_101", + "SODIMM_45", + "SODIMM_43", + "SODIMM_105", + "SODIMM_106", + "SODIMM_107", + "SODIMM_108", + "SODIMM_104", + "SODIMM_103", + "SODIMM_115", + "SODIMM_114", + "SODIMM_113", + "SODIMM_112", + "SODIMM_109", + "SODIMM_110", + "SODIMM_95", + "SODIMM_96", + "SODIMM_97", + "ENET_nINT", + "ENET_nRST", + "SODIMM_84", + "SODIMM_87", + "SODIMM_86", + "SODIMM_85", + "SODIMM_83", + "", + "SODIMM_66", + "SODIMM_65", + ""; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "SODIMM_76", + "SODIMM_81", + "SODIMM_146", + "SODIMM_48", + "SODIMM_46", + "SODIMM_47", + "SODIMM_44", + "SODIMM_49", + "", + "SODIMM_70", + "SODIMM_69", + "PMIC_SCL", + "PMIC_SDA", + "SODIMM_41", + "SODIMM_40", + "SODIMM_148", + "SODIMM_149", + "SODIMM_150", + "SODIMM_151", + "SODIMM_60", + "SODIMM_59", + "SODIMM_64", + "SODIMM_63", + "SODIMM_62", + "SODIMM_61", + "SODIMM_68", + "SODIMM_67", + "", + ""; +}; + +&i2c1 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + clock-frequency = <400000>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@25 { + reg = <0x25>; + compatible = "nxp,pca9450c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "vdd-soc"; + regulator-min-microvolt = <805000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <805000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_nand: BUCK5 { + regulator-name = "nvcc-nand"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram: BUCK6 { + regulator-name = "nvcc-dram"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_snvs_1v8: LDO1 { + regulator-name = "snvs-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + reg_vdda_1v8: LDO3 { + regulator-name = "vdda-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&usdhc3 { /* eMMC */ + max-frequency = <200000000>; + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + vmmc-supply = <&reg_vdd_3v3>; + vqmmc-supply = <&reg_nvcc_nand>; + voltage-ranges = <3300 3300>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK + (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_SION) + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC + (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO + (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST) + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST) + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER + (MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST) + >; + }; + + pinctrl_eqos_sleep: eqos-sleep-grp { + fsl,pins = < + MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22 + (MX8MP_ODE_ENABLE | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_ethphy_int_b: ethphy-int-bgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 + (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT) + >; + }; + + pinctrl_ethphy_rst_b: ethphy-rst-bgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL + (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE | MX8MP_SION) + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA + (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE | MX8MP_SION) + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 + (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE | MX8MP_SION) + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 + (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE | MX8MP_SION) + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 + (MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_reg_3v3_etn: reg-3v3-etngrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23 + (MX8MP_PULL_UP | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK + (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 + (MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE + (MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE + (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE + (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE) + >; + }; +};

[11/14] arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM

Commit Message

Patch