diff mbox series

[v7,14/15] drm/msm/dpu: support plane splitting in quad-pipe case

Message ID 20250226-sm8650-v6-14-hmd-deckard-mdss-quad-upstream-oldbootwrapper-36-prep-v7-14-8d5f5f426eb2@linaro.org (mailing list archive)
State New
Headers show
Series drm/msm/dpu: Support quad pipe with dual-DSI | expand

Commit Message

Jun Nie Feb. 26, 2025, 12:31 p.m. UTC 
The content of every half of screen is sent out via one interface in
dual-DSI case. The content for every interface is blended by a LM
pair in quad-pipe case, thus a LM pair should not blend any content
that cross the half of screen in this case. Clip plane into pipes per
left and right half screen ROI if topology is quad pipe case.

The clipped rectangle on every half of screen is futher handled by two
pipes if its width exceeds a limit for a single pipe.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 134 +++++++++++++++++++++---------
 1 file changed, 94 insertions(+), 40 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index d1d6c91ed0f8e1c62b757ca42546fbc421609f72..39e3126d7b5f64ea3dabe341f366cd3c4298d303 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -831,8 +831,12 @@  static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
 	struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
 	struct dpu_sw_pipe_cfg *pipe_cfg;
 	struct dpu_sw_pipe_cfg *r_pipe_cfg;
+	struct dpu_sw_pipe_cfg init_pipe_cfg;
 	struct drm_rect fb_rect = { 0 };
+	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	uint32_t max_linewidth;
+	u32 num_lm;
+	int stage_id, num_stages;
 
 	min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
 	max_scale = MAX_DOWNSCALE_RATIO << 16;
@@ -855,13 +859,10 @@  static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
 		return -EINVAL;
 	}
 
-	/* move the assignment here, to ease handling to another pairs later */
-	pipe_cfg = &pstate->pipe_cfg[0];
-	r_pipe_cfg = &pstate->pipe_cfg[1];
-	/* state->src is 16.16, src_rect is not */
-	drm_rect_fp_to_int(&pipe_cfg->src_rect, &new_plane_state->src);
+	num_lm = dpu_crtc_get_num_lm(crtc_state);
 
-	pipe_cfg->dst_rect = new_plane_state->dst;
+	/* state->src is 16.16, src_rect is not */
+	drm_rect_fp_to_int(&init_pipe_cfg.src_rect, &new_plane_state->src);
 
 	fb_rect.x2 = new_plane_state->fb->width;
 	fb_rect.y2 = new_plane_state->fb->height;
@@ -886,35 +887,91 @@  static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
 
 	max_linewidth = pdpu->catalog->caps->max_linewidth;
 
-	drm_rect_rotate(&pipe_cfg->src_rect,
+	drm_rect_rotate(&init_pipe_cfg.src_rect,
 			new_plane_state->fb->width, new_plane_state->fb->height,
 			new_plane_state->rotation);
 
-	if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
-	     _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
-		if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
-			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
-					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
-			return -E2BIG;
+	/*
+	 * We have 1 mixer pair cfg for 1:1:1 and 2:2:1 topology, 2 mixer pair
+	 * configs for left and right half screen in case of 4:4:2 topology.
+	 * But we may have 2 rect to split wide plane that exceeds limit with 1
+	 * config for 2:2:1. So need to handle both wide plane splitting, and
+	 * two halves of screen splitting for quad-pipe case. Check dest
+	 * rectangle left/right clipping first, then check wide rectangle
+	 * splitting in every half next.
+	 */
+	num_stages = (num_lm + 1) / 2;
+	/* iterate mixer configs for this plane, to separate left/right with the id */
+	for (stage_id = 0; stage_id < num_stages; stage_id++) {
+		struct drm_rect mixer_rect = {stage_id * mode->hdisplay / num_stages, 0,
+					(stage_id + 1) * mode->hdisplay / num_stages,
+					mode->vdisplay};
+		int cfg_idx = stage_id * PIPES_PER_STAGE;
+
+		pipe_cfg = &pstate->pipe_cfg[cfg_idx];
+		r_pipe_cfg = &pstate->pipe_cfg[cfg_idx + 1];
+
+		drm_rect_fp_to_int(&pipe_cfg->src_rect, &new_plane_state->src);
+		pipe_cfg->dst_rect = new_plane_state->dst;
+
+		DPU_DEBUG_PLANE(pdpu, "checking src " DRM_RECT_FMT
+				" vs clip window " DRM_RECT_FMT "\n",
+				DRM_RECT_ARG(&pipe_cfg->src_rect),
+				DRM_RECT_ARG(&mixer_rect));
+
+		/*
+		 * If this plane does not fall into mixer rect, check next
+		 * mixer rect.
+		 */
+		if (!drm_rect_clip_scaled(&pipe_cfg->src_rect,
+					  &pipe_cfg->dst_rect,
+					  &mixer_rect)) {
+			memset(pipe_cfg, 0, 2 * sizeof(struct dpu_sw_pipe_cfg));
+
+			continue;
 		}
 
-		*r_pipe_cfg = *pipe_cfg;
-		pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
-		pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
-		r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
-		r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
-	} else {
-		memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
-	}
+		pipe_cfg->dst_rect.x1 -= mixer_rect.x1;
+		pipe_cfg->dst_rect.x2 -= mixer_rect.x1;
+
+		DPU_DEBUG_PLANE(pdpu, "Got clip src:" DRM_RECT_FMT " dst: " DRM_RECT_FMT "\n",
+				DRM_RECT_ARG(&pipe_cfg->src_rect), DRM_RECT_ARG(&pipe_cfg->dst_rect));
 
-	drm_rect_rotate_inv(&pipe_cfg->src_rect,
-			    new_plane_state->fb->width, new_plane_state->fb->height,
-			    new_plane_state->rotation);
-	if (drm_rect_width(&r_pipe_cfg->src_rect) != 0)
-		drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
-				    new_plane_state->fb->width, new_plane_state->fb->height,
+		/* Split wide rect into 2 rect */
+		if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
+		     _dpu_plane_calc_clk(mode, pipe_cfg) > max_mdp_clk_rate) {
+
+			if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
+				DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
+						DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+				return -E2BIG;
+			}
+
+			memcpy(r_pipe_cfg, pipe_cfg, sizeof(struct dpu_sw_pipe_cfg));
+			pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
+			pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
+			r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
+			r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
+			DPU_DEBUG_PLANE(pdpu, "Split wide plane into:"
+					DRM_RECT_FMT " and " DRM_RECT_FMT "\n",
+					DRM_RECT_ARG(&pipe_cfg->src_rect),
+					DRM_RECT_ARG(&r_pipe_cfg->src_rect));
+		} else {
+			memset(r_pipe_cfg, 0, sizeof(struct dpu_sw_pipe_cfg));
+		}
+
+		drm_rect_rotate_inv(&pipe_cfg->src_rect,
+				    new_plane_state->fb->width,
+				    new_plane_state->fb->height,
 				    new_plane_state->rotation);
 
+		if (drm_rect_width(&r_pipe_cfg->src_rect) != 0)
+			drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
+					    new_plane_state->fb->width,
+					    new_plane_state->fb->height,
+					    new_plane_state->rotation);
+	}
+
 	pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
 
 	return 0;
@@ -954,20 +1011,17 @@  static int dpu_plane_atomic_check_sspp(struct drm_plane *plane,
 		drm_atomic_get_new_plane_state(state, plane);
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
 	struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
-	struct dpu_sw_pipe *pipe = &pstate->pipe[0];
-	struct dpu_sw_pipe *r_pipe = &pstate->pipe[1];
-	struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg[0];
-	struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->pipe_cfg[1];
-	int ret = 0;
-
-	ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg,
-					  &crtc_state->adjusted_mode,
-					  new_plane_state);
-	if (ret)
-		return ret;
+	struct dpu_sw_pipe *pipe;
+	struct dpu_sw_pipe_cfg *pipe_cfg;
+	int ret = 0, i;
 
-	if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) {
-		ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg,
+	for (i = 0; i < PIPES_PER_PLANE; i++) {
+		pipe = &pstate->pipe[i];
+		pipe_cfg = &pstate->pipe_cfg[i];
+		if (!pipe->sspp)
+			continue;
+		DPU_DEBUG_PLANE(pdpu, "pipe %d is in use, validate it\n", i);
+		ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg,
 						  &crtc_state->adjusted_mode,
 						  new_plane_state);
 		if (ret)