@@ -449,12 +449,6 @@ config CHARGER_88PM860X
help
Say Y here to enable charger for Marvell 88PM860x chip.
-config CHARGER_PCF50633
- tristate "NXP PCF50633 MBC"
- depends on MFD_PCF50633
- help
- Say Y to include support for NXP PCF50633 Main Battery Charger.
-
config BATTERY_RX51
tristate "Nokia RX-51 (N900) battery driver"
depends on TWL4030_MADC
@@ -62,7 +62,6 @@ obj-$(CONFIG_CHARGER_RT9467) += rt9467-charger.o
obj-$(CONFIG_CHARGER_RT9471) += rt9471.o
obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
-obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o ab8500_chargalg.o
obj-$(CONFIG_CHARGER_CPCAP) += cpcap-charger.o
deleted file mode 100644
@@ -1,466 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* NXP PCF50633 Main Battery Charger Driver
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * Author: Balaji Rao <balajirrao@openmoko.org>
- * All rights reserved.
- *
- * Broken down from monstrous PCF50633 driver mainly by
- * Harald Welte, Andy Green and Werner Almesberger
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/sysfs.h>
-#include <linux/platform_device.h>
-#include <linux/power_supply.h>
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-
-struct pcf50633_mbc {
- struct pcf50633 *pcf;
-
- int adapter_online;
- int usb_online;
-
- struct power_supply *usb;
- struct power_supply *adapter;
- struct power_supply *ac;
-};
-
-int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
-{
- struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
- int ret = 0;
- u8 bits;
- u8 mbcs2, chgmod;
- unsigned int mbcc5;
-
- if (ma >= 1000) {
- bits = PCF50633_MBCC7_USB_1000mA;
- ma = 1000;
- } else if (ma >= 500) {
- bits = PCF50633_MBCC7_USB_500mA;
- ma = 500;
- } else if (ma >= 100) {
- bits = PCF50633_MBCC7_USB_100mA;
- ma = 100;
- } else {
- bits = PCF50633_MBCC7_USB_SUSPEND;
- ma = 0;
- }
-
- ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
- PCF50633_MBCC7_USB_MASK, bits);
- if (ret)
- dev_err(pcf->dev, "error setting usb curlim to %d mA\n", ma);
- else
- dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
-
- /*
- * We limit the charging current to be the USB current limit.
- * The reason is that on pcf50633, when it enters PMU Standby mode,
- * which it does when the device goes "off", the USB current limit
- * reverts to the variant default. In at least one common case, that
- * default is 500mA. By setting the charging current to be the same
- * as the USB limit we set here before PMU standby, we enforce it only
- * using the correct amount of current even when the USB current limit
- * gets reset to the wrong thing
- */
-
- if (mbc->pcf->pdata->charger_reference_current_ma) {
- mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
- if (mbcc5 > 255)
- mbcc5 = 255;
- pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
- }
-
- mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
- chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
-
- /* If chgmod == BATFULL, setting chgena has no effect.
- * Datasheet says we need to set resume instead but when autoresume is
- * used resume doesn't work. Clear and set chgena instead.
- */
- if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
- pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
- PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
- else {
- pcf50633_reg_clear_bits(pcf, PCF50633_REG_MBCC1,
- PCF50633_MBCC1_CHGENA);
- pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
- PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
- }
-
- power_supply_changed(mbc->usb);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(pcf50633_mbc_usb_curlim_set);
-
-int pcf50633_mbc_get_status(struct pcf50633 *pcf)
-{
- struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
- int status = 0;
- u8 chgmod;
-
- if (!mbc)
- return 0;
-
- chgmod = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2)
- & PCF50633_MBCS2_MBC_MASK;
-
- if (mbc->usb_online)
- status |= PCF50633_MBC_USB_ONLINE;
- if (chgmod == PCF50633_MBCS2_MBC_USB_PRE ||
- chgmod == PCF50633_MBCS2_MBC_USB_PRE_WAIT ||
- chgmod == PCF50633_MBCS2_MBC_USB_FAST ||
- chgmod == PCF50633_MBCS2_MBC_USB_FAST_WAIT)
- status |= PCF50633_MBC_USB_ACTIVE;
- if (mbc->adapter_online)
- status |= PCF50633_MBC_ADAPTER_ONLINE;
- if (chgmod == PCF50633_MBCS2_MBC_ADP_PRE ||
- chgmod == PCF50633_MBCS2_MBC_ADP_PRE_WAIT ||
- chgmod == PCF50633_MBCS2_MBC_ADP_FAST ||
- chgmod == PCF50633_MBCS2_MBC_ADP_FAST_WAIT)
- status |= PCF50633_MBC_ADAPTER_ACTIVE;
-
- return status;
-}
-EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status);
-
-int pcf50633_mbc_get_usb_online_status(struct pcf50633 *pcf)
-{
- struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
-
- if (!mbc)
- return 0;
-
- return mbc->usb_online;
-}
-EXPORT_SYMBOL_GPL(pcf50633_mbc_get_usb_online_status);
-
-static ssize_t
-show_chgmode(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
-
- u8 mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
- u8 chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
-
- return sysfs_emit(buf, "%d\n", chgmod);
-}
-static DEVICE_ATTR(chgmode, S_IRUGO, show_chgmode, NULL);
-
-static ssize_t
-show_usblim(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
- u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
- PCF50633_MBCC7_USB_MASK;
- unsigned int ma;
-
- if (usblim == PCF50633_MBCC7_USB_1000mA)
- ma = 1000;
- else if (usblim == PCF50633_MBCC7_USB_500mA)
- ma = 500;
- else if (usblim == PCF50633_MBCC7_USB_100mA)
- ma = 100;
- else
- ma = 0;
-
- return sysfs_emit(buf, "%u\n", ma);
-}
-
-static ssize_t set_usblim(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
- unsigned long ma;
- int ret;
-
- ret = kstrtoul(buf, 10, &ma);
- if (ret)
- return ret;
-
- pcf50633_mbc_usb_curlim_set(mbc->pcf, ma);
-
- return count;
-}
-
-static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
-
-static ssize_t
-show_chglim(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
- u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5);
- unsigned int ma;
-
- if (!mbc->pcf->pdata->charger_reference_current_ma)
- return -ENODEV;
-
- ma = (mbc->pcf->pdata->charger_reference_current_ma * mbcc5) >> 8;
-
- return sysfs_emit(buf, "%u\n", ma);
-}
-
-static ssize_t set_chglim(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
- unsigned long ma;
- unsigned int mbcc5;
- int ret;
-
- if (!mbc->pcf->pdata->charger_reference_current_ma)
- return -ENODEV;
-
- ret = kstrtoul(buf, 10, &ma);
- if (ret)
- return ret;
-
- mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
- if (mbcc5 > 255)
- mbcc5 = 255;
- pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
-
- return count;
-}
-
-/*
- * This attribute allows to change MBC charging limit on the fly
- * independently of usb current limit. It also gets set automatically every
- * time usb current limit is changed.
- */
-static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim);
-
-static struct attribute *pcf50633_mbc_sysfs_attrs[] = {
- &dev_attr_chgmode.attr,
- &dev_attr_usb_curlim.attr,
- &dev_attr_chg_curlim.attr,
- NULL,
-};
-
-ATTRIBUTE_GROUPS(pcf50633_mbc_sysfs);
-
-static void
-pcf50633_mbc_irq_handler(int irq, void *data)
-{
- struct pcf50633_mbc *mbc = data;
-
- /* USB */
- if (irq == PCF50633_IRQ_USBINS) {
- mbc->usb_online = 1;
- } else if (irq == PCF50633_IRQ_USBREM) {
- mbc->usb_online = 0;
- pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);
- }
-
- /* Adapter */
- if (irq == PCF50633_IRQ_ADPINS)
- mbc->adapter_online = 1;
- else if (irq == PCF50633_IRQ_ADPREM)
- mbc->adapter_online = 0;
-
- power_supply_changed(mbc->ac);
- power_supply_changed(mbc->usb);
- power_supply_changed(mbc->adapter);
-
- if (mbc->pcf->pdata->mbc_event_callback)
- mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
-}
-
-static int adapter_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
- int ret = 0;
-
- switch (psp) {
- case POWER_SUPPLY_PROP_ONLINE:
- val->intval = mbc->adapter_online;
- break;
- default:
- ret = -EINVAL;
- break;
- }
- return ret;
-}
-
-static int usb_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
- int ret = 0;
- u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
- PCF50633_MBCC7_USB_MASK;
-
- switch (psp) {
- case POWER_SUPPLY_PROP_ONLINE:
- val->intval = mbc->usb_online &&
- (usblim <= PCF50633_MBCC7_USB_500mA);
- break;
- default:
- ret = -EINVAL;
- break;
- }
- return ret;
-}
-
-static int ac_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
- int ret = 0;
- u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
- PCF50633_MBCC7_USB_MASK;
-
- switch (psp) {
- case POWER_SUPPLY_PROP_ONLINE:
- val->intval = mbc->usb_online &&
- (usblim == PCF50633_MBCC7_USB_1000mA);
- break;
- default:
- ret = -EINVAL;
- break;
- }
- return ret;
-}
-
-static enum power_supply_property power_props[] = {
- POWER_SUPPLY_PROP_ONLINE,
-};
-
-static const u8 mbc_irq_handlers[] = {
- PCF50633_IRQ_ADPINS,
- PCF50633_IRQ_ADPREM,
- PCF50633_IRQ_USBINS,
- PCF50633_IRQ_USBREM,
- PCF50633_IRQ_BATFULL,
- PCF50633_IRQ_CHGHALT,
- PCF50633_IRQ_THLIMON,
- PCF50633_IRQ_THLIMOFF,
- PCF50633_IRQ_USBLIMON,
- PCF50633_IRQ_USBLIMOFF,
- PCF50633_IRQ_LOWSYS,
- PCF50633_IRQ_LOWBAT,
-};
-
-static const struct power_supply_desc pcf50633_mbc_adapter_desc = {
- .name = "adapter",
- .type = POWER_SUPPLY_TYPE_MAINS,
- .properties = power_props,
- .num_properties = ARRAY_SIZE(power_props),
- .get_property = &adapter_get_property,
-};
-
-static const struct power_supply_desc pcf50633_mbc_usb_desc = {
- .name = "usb",
- .type = POWER_SUPPLY_TYPE_USB,
- .properties = power_props,
- .num_properties = ARRAY_SIZE(power_props),
- .get_property = usb_get_property,
-};
-
-static const struct power_supply_desc pcf50633_mbc_ac_desc = {
- .name = "ac",
- .type = POWER_SUPPLY_TYPE_MAINS,
- .properties = power_props,
- .num_properties = ARRAY_SIZE(power_props),
- .get_property = ac_get_property,
-};
-
-static int pcf50633_mbc_probe(struct platform_device *pdev)
-{
- struct power_supply_config psy_cfg = {};
- struct power_supply_config usb_psy_cfg;
- struct pcf50633_mbc *mbc;
- int i;
- u8 mbcs1;
-
- mbc = devm_kzalloc(&pdev->dev, sizeof(*mbc), GFP_KERNEL);
- if (!mbc)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, mbc);
- mbc->pcf = dev_to_pcf50633(pdev->dev.parent);
-
- /* Set up IRQ handlers */
- for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
- pcf50633_register_irq(mbc->pcf, mbc_irq_handlers[i],
- pcf50633_mbc_irq_handler, mbc);
-
- psy_cfg.supplied_to = mbc->pcf->pdata->batteries;
- psy_cfg.num_supplicants = mbc->pcf->pdata->num_batteries;
- psy_cfg.drv_data = mbc;
-
- /* Create power supplies */
- mbc->adapter = devm_power_supply_register(&pdev->dev,
- &pcf50633_mbc_adapter_desc,
- &psy_cfg);
- if (IS_ERR(mbc->adapter)) {
- dev_err(mbc->pcf->dev, "failed to register adapter\n");
- return PTR_ERR(mbc->adapter);
- }
-
- usb_psy_cfg = psy_cfg;
- usb_psy_cfg.attr_grp = pcf50633_mbc_sysfs_groups;
-
- mbc->usb = devm_power_supply_register(&pdev->dev,
- &pcf50633_mbc_usb_desc,
- &usb_psy_cfg);
- if (IS_ERR(mbc->usb)) {
- dev_err(mbc->pcf->dev, "failed to register usb\n");
- return PTR_ERR(mbc->usb);
- }
-
- mbc->ac = devm_power_supply_register(&pdev->dev,
- &pcf50633_mbc_ac_desc,
- &psy_cfg);
- if (IS_ERR(mbc->ac)) {
- dev_err(mbc->pcf->dev, "failed to register ac\n");
- return PTR_ERR(mbc->ac);
- }
-
- mbcs1 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS1);
- if (mbcs1 & PCF50633_MBCS1_USBPRES)
- pcf50633_mbc_irq_handler(PCF50633_IRQ_USBINS, mbc);
- if (mbcs1 & PCF50633_MBCS1_ADAPTPRES)
- pcf50633_mbc_irq_handler(PCF50633_IRQ_ADPINS, mbc);
-
- return 0;
-}
-
-static void pcf50633_mbc_remove(struct platform_device *pdev)
-{
- struct pcf50633_mbc *mbc = platform_get_drvdata(pdev);
- int i;
-
- /* Remove IRQ handlers */
- for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
- pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]);
-}
-
-static struct platform_driver pcf50633_mbc_driver = {
- .driver = {
- .name = "pcf50633-mbc",
- },
- .probe = pcf50633_mbc_probe,
- .remove = pcf50633_mbc_remove,
-};
-
-module_platform_driver(pcf50633_mbc_driver);
-
-MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
-MODULE_DESCRIPTION("PCF50633 mbc driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pcf50633-mbc");