| Message ID | 3a369602ae35fdbf5e4a12f7e172088c89fa27bb.1468225027.git.lukas@wunner.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jul 11, 2016 at 10:22:33AM +0200, Lukas Wunner wrote: > Fix up formatting glitches remaining after the automatic rst conversion. > > Cc: Jonathan Corbet <corbet@lwn.net> > Cc: Jani Nikula <jani.nikula@intel.com> > Signed-off-by: Lukas Wunner <lukas@wunner.de> \o/ for doc patches! Applied to drm-misc, thanks. -Daniel > --- > Documentation/gpu/drm-internals.rst | 4 ++-- > Documentation/gpu/vga-switcheroo.rst | 8 ++------ > drivers/gpu/vga/vga_switcheroo.c | 28 ++++++++++++++-------------- > 3 files changed, 18 insertions(+), 22 deletions(-) > > diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst > index 4f71765..490d655 100644 > --- a/Documentation/gpu/drm-internals.rst > +++ b/Documentation/gpu/drm-internals.rst > @@ -280,8 +280,8 @@ private data in the open method should free it here. > The lastclose method should restore CRTC and plane properties to default > value, so that a subsequent open of the device will not inherit state > from the previous user. It can also be used to execute delayed power > -switching state changes, e.g. in conjunction with the vga_switcheroo > -infrastructure (see ?). Beyond that KMS drivers should not do any > +switching state changes, e.g. in conjunction with the :ref:`vga_switcheroo` > +infrastructure. Beyond that KMS drivers should not do any > further cleanup. Only legacy UMS drivers might need to clean up device > state so that the vga console or an independent fbdev driver could take > over. > diff --git a/Documentation/gpu/vga-switcheroo.rst b/Documentation/gpu/vga-switcheroo.rst > index 327d930..cbbdb99 100644 > --- a/Documentation/gpu/vga-switcheroo.rst > +++ b/Documentation/gpu/vga-switcheroo.rst > @@ -1,3 +1,5 @@ > +.. _vga_switcheroo: > + > ============== > VGA Switcheroo > ============== > @@ -94,9 +96,3 @@ Public functions > > .. kernel-doc:: include/linux/apple-gmux.h > :internal: > - > -.. WARNING: DOCPROC directive not supported: !Cdrivers/gpu/vga/vga_switcheroo.c > - > -.. WARNING: DOCPROC directive not supported: !Cinclude/linux/vga_switcheroo.h > - > -.. WARNING: DOCPROC directive not supported: !Cdrivers/platform/x86/apple-gmux.c > diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c > index 2df216b3..5f962bf 100644 > --- a/drivers/gpu/vga/vga_switcheroo.c > +++ b/drivers/gpu/vga/vga_switcheroo.c > @@ -52,9 +52,9 @@ > * > * * muxed: Dual GPUs with a multiplexer chip to switch outputs between GPUs. > * * muxless: Dual GPUs but only one of them is connected to outputs. > - * The other one is merely used to offload rendering, its results > - * are copied over PCIe into the framebuffer. On Linux this is > - * supported with DRI PRIME. > + * The other one is merely used to offload rendering, its results > + * are copied over PCIe into the framebuffer. On Linux this is > + * supported with DRI PRIME. > * > * Hybrid graphics started to appear in the late Naughties and were initially > * all muxed. Newer laptops moved to a muxless architecture for cost reasons. > @@ -560,21 +560,21 @@ EXPORT_SYMBOL(vga_switcheroo_unlock_ddc); > * * OFF: Power off the device not in use. > * * ON: Power on the device not in use. > * * IGD: Switch to the integrated graphics device. > - * Power on the integrated GPU if necessary, power off the discrete GPU. > - * Prerequisite is that no user space processes (e.g. Xorg, alsactl) > - * have opened device files of the GPUs or the audio client. If the > - * switch fails, the user may invoke lsof(8) or fuser(1) on /dev/dri/ > - * and /dev/snd/controlC1 to identify processes blocking the switch. > + * Power on the integrated GPU if necessary, power off the discrete GPU. > + * Prerequisite is that no user space processes (e.g. Xorg, alsactl) > + * have opened device files of the GPUs or the audio client. If the > + * switch fails, the user may invoke lsof(8) or fuser(1) on /dev/dri/ > + * and /dev/snd/controlC1 to identify processes blocking the switch. > * * DIS: Switch to the discrete graphics device. > * * DIGD: Delayed switch to the integrated graphics device. > - * This will perform the switch once the last user space process has > - * closed the device files of the GPUs and the audio client. > + * This will perform the switch once the last user space process has > + * closed the device files of the GPUs and the audio client. > * * DDIS: Delayed switch to the discrete graphics device. > * * MIGD: Mux-only switch to the integrated graphics device. > - * Does not remap console or change the power state of either gpu. > - * If the integrated GPU is currently off, the screen will turn black. > - * If it is on, the screen will show whatever happens to be in VRAM. > - * Either way, the user has to blindly enter the command to switch back. > + * Does not remap console or change the power state of either gpu. > + * If the integrated GPU is currently off, the screen will turn black. > + * If it is on, the screen will show whatever happens to be in VRAM. > + * Either way, the user has to blindly enter the command to switch back. > * * MDIS: Mux-only switch to the discrete graphics device. > * > * For GPUs whose power state is controlled by the driver's runtime pm, > -- > 2.8.1 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst index 4f71765..490d655 100644 --- a/Documentation/gpu/drm-internals.rst +++ b/Documentation/gpu/drm-internals.rst @@ -280,8 +280,8 @@ private data in the open method should free it here. The lastclose method should restore CRTC and plane properties to default value, so that a subsequent open of the device will not inherit state from the previous user. It can also be used to execute delayed power -switching state changes, e.g. in conjunction with the vga_switcheroo -infrastructure (see ?). Beyond that KMS drivers should not do any +switching state changes, e.g. in conjunction with the :ref:`vga_switcheroo` +infrastructure. Beyond that KMS drivers should not do any further cleanup. Only legacy UMS drivers might need to clean up device state so that the vga console or an independent fbdev driver could take over. diff --git a/Documentation/gpu/vga-switcheroo.rst b/Documentation/gpu/vga-switcheroo.rst index 327d930..cbbdb99 100644 --- a/Documentation/gpu/vga-switcheroo.rst +++ b/Documentation/gpu/vga-switcheroo.rst @@ -1,3 +1,5 @@ +.. _vga_switcheroo: + ============== VGA Switcheroo ============== @@ -94,9 +96,3 @@ Public functions .. kernel-doc:: include/linux/apple-gmux.h :internal: - -.. WARNING: DOCPROC directive not supported: !Cdrivers/gpu/vga/vga_switcheroo.c - -.. WARNING: DOCPROC directive not supported: !Cinclude/linux/vga_switcheroo.h - -.. WARNING: DOCPROC directive not supported: !Cdrivers/platform/x86/apple-gmux.c diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index 2df216b3..5f962bf 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -52,9 +52,9 @@ * * * muxed: Dual GPUs with a multiplexer chip to switch outputs between GPUs. * * muxless: Dual GPUs but only one of them is connected to outputs. - * The other one is merely used to offload rendering, its results - * are copied over PCIe into the framebuffer. On Linux this is - * supported with DRI PRIME. + * The other one is merely used to offload rendering, its results + * are copied over PCIe into the framebuffer. On Linux this is + * supported with DRI PRIME. * * Hybrid graphics started to appear in the late Naughties and were initially * all muxed. Newer laptops moved to a muxless architecture for cost reasons. @@ -560,21 +560,21 @@ EXPORT_SYMBOL(vga_switcheroo_unlock_ddc); * * OFF: Power off the device not in use. * * ON: Power on the device not in use. * * IGD: Switch to the integrated graphics device. - * Power on the integrated GPU if necessary, power off the discrete GPU. - * Prerequisite is that no user space processes (e.g. Xorg, alsactl) - * have opened device files of the GPUs or the audio client. If the - * switch fails, the user may invoke lsof(8) or fuser(1) on /dev/dri/ - * and /dev/snd/controlC1 to identify processes blocking the switch. + * Power on the integrated GPU if necessary, power off the discrete GPU. + * Prerequisite is that no user space processes (e.g. Xorg, alsactl) + * have opened device files of the GPUs or the audio client. If the + * switch fails, the user may invoke lsof(8) or fuser(1) on /dev/dri/ + * and /dev/snd/controlC1 to identify processes blocking the switch. * * DIS: Switch to the discrete graphics device. * * DIGD: Delayed switch to the integrated graphics device. - * This will perform the switch once the last user space process has - * closed the device files of the GPUs and the audio client. + * This will perform the switch once the last user space process has + * closed the device files of the GPUs and the audio client. * * DDIS: Delayed switch to the discrete graphics device. * * MIGD: Mux-only switch to the integrated graphics device. - * Does not remap console or change the power state of either gpu. - * If the integrated GPU is currently off, the screen will turn black. - * If it is on, the screen will show whatever happens to be in VRAM. - * Either way, the user has to blindly enter the command to switch back. + * Does not remap console or change the power state of either gpu. + * If the integrated GPU is currently off, the screen will turn black. + * If it is on, the screen will show whatever happens to be in VRAM. + * Either way, the user has to blindly enter the command to switch back. * * MDIS: Mux-only switch to the discrete graphics device. * * For GPUs whose power state is controlled by the driver's runtime pm,
Fix up formatting glitches remaining after the automatic rst conversion. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> --- Documentation/gpu/drm-internals.rst | 4 ++-- Documentation/gpu/vga-switcheroo.rst | 8 ++------ drivers/gpu/vga/vga_switcheroo.c | 28 ++++++++++++++-------------- 3 files changed, 18 insertions(+), 22 deletions(-)