Message ID | 5ebbc0cf3fc8fcfd0300fb4d81be5acae156a4d4.1561482165.git.agx@sigxcpu.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | drm/panel: jh057n0090: Add regulators and drop magic value in init | expand |
On Tue, Jun 25, 2019 at 07:05:18PM +0200, Guido Günther wrote: > Document the vcc-supply and iovcc-supply propertes of the Rocktech > jh057n0090 panel. s/propertes/properties s/jh057n0090/jh057n00900 With these fixed: Reviewed-by: Sam Ravnborg <sam@ravnborg.org> > > Signed-off-by: Guido Günther <agx@sigxcpu.org> > --- > .../bindings/display/panel/rocktech,jh057n00900.txt | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt > index 1b5763200cf6..a372c5d84695 100644 > --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt > +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt > @@ -5,6 +5,9 @@ Required properties: > - reg: DSI virtual channel of the peripheral > - reset-gpios: panel reset gpio > - backlight: phandle of the backlight device attached to the panel > +- vcc-supply: phandle of the regulator that provides the vcc supply voltage. > +- iovcc-supply: phandle of the regulator that provides the iovcc supply > + voltage. > > Example: > > @@ -14,5 +17,7 @@ Example: > reg = <0>; > backlight = <&backlight>; > reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; > + vcc-supply = <®_2v8_p>; > + iovcc-supply = <®_1v8_p>; > }; > }; > -- > 2.20.1
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt index 1b5763200cf6..a372c5d84695 100644 --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt @@ -5,6 +5,9 @@ Required properties: - reg: DSI virtual channel of the peripheral - reset-gpios: panel reset gpio - backlight: phandle of the backlight device attached to the panel +- vcc-supply: phandle of the regulator that provides the vcc supply voltage. +- iovcc-supply: phandle of the regulator that provides the iovcc supply + voltage. Example: @@ -14,5 +17,7 @@ Example: reg = <0>; backlight = <&backlight>; reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + vcc-supply = <®_2v8_p>; + iovcc-supply = <®_1v8_p>; }; };
Document the vcc-supply and iovcc-supply propertes of the Rocktech jh057n0090 panel. Signed-off-by: Guido Günther <agx@sigxcpu.org> --- .../bindings/display/panel/rocktech,jh057n00900.txt | 5 +++++ 1 file changed, 5 insertions(+)