@@ -171,7 +171,7 @@ static void tilcdc_crtc_enable_irqs(struct drm_device *dev)
if (priv->rev == 1) {
tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
- LCDC_V1_SYNC_LOST_INT_ENA |
+ LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
LCDC_V1_UNDERFLOW_INT_ENA);
tilcdc_set(dev, LCDC_DMA_CTRL_REG,
LCDC_V1_END_OF_FRAME_INT_ENA);
@@ -190,7 +190,7 @@ static void tilcdc_crtc_disable_irqs(struct drm_device *dev)
/* disable irqs that we might have enabled: */
if (priv->rev == 1) {
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
- LCDC_V1_SYNC_LOST_INT_ENA |
+ LCDC_V1_SYNC_LOST_INT_ENA | LCDC_V1_FRAME_DONE_INT_ENA |
LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA);
tilcdc_clear(dev, LCDC_DMA_CTRL_REG,
LCDC_V1_END_OF_FRAME_INT_ENA);
@@ -935,13 +935,17 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
}
}
+ if (stat & LCDC_FRAME_DONE) {
+ tilcdc_crtc->frame_done = true;
+ wake_up(&tilcdc_crtc->frame_done_wq);
+ /* rev 1 lcdc appears to hang if irq is not disbaled here */
+ if (priv->rev == 1)
+ tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
+ LCDC_V1_FRAME_DONE_INT_ENA);
+ }
+
/* For revision 2 only */
if (priv->rev == 2) {
- if (stat & LCDC_FRAME_DONE) {
- tilcdc_crtc->frame_done = true;
- wake_up(&tilcdc_crtc->frame_done_wq);
- }
-
/* Indicate to LCDC that the interrupt service routine has
* completed, see 13.3.6.1.6 in AM335x TRM.
*/
@@ -67,6 +67,7 @@
#define LCDC_V1_PL_INT_ENA BIT(4)
#define LCDC_V2_PL_INT_ENA BIT(6)
#define LCDC_V1_SYNC_LOST_INT_ENA BIT(5)
+#define LCDC_V1_FRAME_DONE_INT_ENA BIT(3)
#define LCDC_MONOCHROME_MODE BIT(1)
#define LCDC_RASTER_ENABLE BIT(0)
#define LCDC_TFT_ALT_ENABLE BIT(23)
We should wait for the last frame to complete before shutting things down also on LCDC rev 1. Signed-off-by: Jyri Sarha <jsarha@ti.com> --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 18 +++++++++++------- drivers/gpu/drm/tilcdc/tilcdc_regs.h | 1 + 2 files changed, 12 insertions(+), 7 deletions(-)