@@ -330,6 +330,8 @@ struct tda998x_priv {
# define CEC_FRO_IM_CLK_CTRL_FRO_DIV (1 << 0)
#define REG_CEC_RXSHPDINTENA 0xfc /* read/write */
#define REG_CEC_RXSHPDINT 0xfd /* read */
+# define CEC_RXSHPDINT_RXSENS BIT(0)
+# define CEC_RXSHPDINT_HPD BIT(1)
#define REG_CEC_RXSHPDLEV 0xfe /* read */
# define CEC_RXSHPDLEV_RXSENS (1 << 0)
# define CEC_RXSHPDLEV_HPD (1 << 1)
@@ -619,11 +621,8 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
DRM_DEBUG_DRIVER(
"tda irq sta %02x cec %02x lvl %02x f0 %02x f1 %02x f2 %02x\n",
sta, cec, lvl, flag0, flag1, flag2);
- if ((flag2 & INT_FLAGS_2_EDID_BLK_RD) && priv->wq_edid_wait) {
- priv->wq_edid_wait = 0;
- wake_up(&priv->wq_edid);
- handled = true;
- } else if (cec != 0) { /* HPD change */
+
+ if (cec & CEC_RXSHPDINT_HPD) {
if (lvl & CEC_RXSHPDLEV_HPD)
tda998x_edid_delay_start(priv);
else
@@ -631,6 +630,13 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
handled = true;
}
+
+ if ((flag2 & INT_FLAGS_2_EDID_BLK_RD) && priv->wq_edid_wait) {
+ priv->wq_edid_wait = 0;
+ wake_up(&priv->wq_edid);
+ handled = true;
+ }
+
return IRQ_RETVAL(handled);
}
As reading the interrupt registers clears the outstanding interrupts, we must process all received interrupts to avoid dropping any. Rearrange the code to achieve this, and properly check for a HPD interrupt from the CEC_RXSHPDINT register. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- drivers/gpu/drm/i2c/tda998x_drv.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)