diff mbox

[v5,3/3,DO,NOT,MERGE] arm: dts: sun8i: bpi-m2m: Add DSI display

Message ID eba350219d6521c5c84986c68f7f0045dcac9aea.1527587352.git-series.maxime.ripard@bootlin.com (mailing list archive)
State New, archived
Headers show

Commit Message

Maxime Ripard May 29, 2018, 9:49 a.m. UTC 
The BananaPi M2M has an optional 1280x720 DSI panel. Since that panel is
optional, we can only show a DT patch that would show how to enable it.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts | 48 +++++++++++++++++++++-
 1 file changed, 48 insertions(+)

Comments

Linus Walleij May 29, 2018, 11:52 a.m. UTC | #1 
On Tue, May 29, 2018 at 11:49 AM, Maxime Ripard
<maxime.ripard@bootlin.com> wrote:

> The BananaPi M2M has an optional 1280x720 DSI panel. Since that panel is
> optional, we can only show a DT patch that would show how to enable it.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

This looks very nice.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
index 0dbdb29a8fff..16ee662b06d6 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -44,6 +44,7 @@ 
 #include "sun8i-a33.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "BananaPi M2 Magic";
@@ -81,6 +82,23 @@ 
 		};
 	};
 
+	pwm_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PG10 */
+	};
+
+	reg_panel: reg-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */
+		enable-active-high;
+	};
+
 	reg_vcc5v0: vcc5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0";
@@ -120,6 +138,26 @@ 
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	panel@0 {
+		compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+		reg = <0>;
+		reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+		power-supply = <&reg_panel>;
+		backlight = <&pwm_bl>;
+	};
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -178,6 +216,12 @@ 
 	status = "okay";
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -290,6 +334,10 @@ 
 	status = "okay";
 };
 
+&tcon0 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_b>;