diff mbox series

[v3,04/10] btrfs: verify that subvolume mounts are unaffected by tempfsid

Message ID 0505c197e80e7f476c39a4a6ab31777c67ea818b.1708772619.git.anand.jain@oracle.com (mailing list archive)
State New, archived
Headers show
Series btrfs: functional test cases for tempfsid | expand

Commit Message

Anand Jain Feb. 24, 2024, 4:43 p.m. UTC 
The tempfsid logic must determine whether the incoming mount request
is for a device already mounted or a new device mount. Verify that it
recognizes the device already mounted well by creating reflink across
the subvolume mount points.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
---
v3:
Fix subvolume create output with _filter_scratch and its golden output
add rb
remove  _require_btrfs_command inspect-internal dump-super
v2:
add subvol group
use $UMOUNT_PROG 
remove _fail for _cp_reflink

 tests/btrfs/311     | 88 +++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/311.out | 24 +++++++++++++
 2 files changed, 112 insertions(+)
 create mode 100755 tests/btrfs/311
 create mode 100644 tests/btrfs/311.out

Comments

Filipe Manana Feb. 26, 2024, 11:49 a.m. UTC | #1 
On Sat, Feb 24, 2024 at 4:44 PM Anand Jain <anand.jain@oracle.com> wrote:
>
> The tempfsid logic must determine whether the incoming mount request
> is for a device already mounted or a new device mount. Verify that it
> recognizes the device already mounted well by creating reflink across
> the subvolume mount points.
>
> Signed-off-by: Anand Jain <anand.jain@oracle.com>
> Reviewed-by: Filipe Manana <fdmanana@suse.com>
> Signed-off-by: Anand Jain <anand.jain@oracle.com>
> ---
> v3:
> Fix subvolume create output with _filter_scratch and its golden output
> add rb
> remove  _require_btrfs_command inspect-internal dump-super
> v2:
> add subvol group
> use $UMOUNT_PROG
> remove _fail for _cp_reflink
>
>  tests/btrfs/311     | 88 +++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/311.out | 24 +++++++++++++
>  2 files changed, 112 insertions(+)
>  create mode 100755 tests/btrfs/311
>  create mode 100644 tests/btrfs/311.out
>
> diff --git a/tests/btrfs/311 b/tests/btrfs/311
> new file mode 100755
> index 000000000000..bdabcf6a9814
> --- /dev/null
> +++ b/tests/btrfs/311
> @@ -0,0 +1,88 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2024 Oracle. All Rights Reserved.
> +#
> +# FS QA Test 311
> +#
> +# Mount the device twice check if the reflink works, this helps to
> +# ensure device is mounted as the same device.
> +#
> +. ./common/preamble
> +_begin_fstest auto quick subvol tempfsid
> +
> +# Override the default cleanup function.
> +_cleanup()
> +{
> +       cd /
> +       $UMOUNT_PROG $mnt1 > /dev/null 2>&1
> +       rm -r -f $tmp.*
> +       rm -r -f $mnt1
> +}
> +
> +. ./common/filter.btrfs
> +. ./common/reflink
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_require_cp_reflink
> +_require_btrfs_sysfs_fsid

This requirement should be inside the check_fsid() helper, as pointed before.

Thanks.

> +_require_btrfs_fs_feature temp_fsid
> +_require_scratch
> +
> +mnt1=$TEST_DIR/$seq/mnt1
> +mkdir -p $mnt1
> +
> +same_dev_mount()
> +{
> +       echo ---- $FUNCNAME ----
> +
> +       _scratch_mkfs >> $seqres.full 2>&1
> +
> +       _scratch_mount
> +       $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' $SCRATCH_MNT/foo | \
> +                                                               _filter_xfs_io
> +
> +       echo Mount the device again to a different mount point
> +       _mount $SCRATCH_DEV $mnt1
> +
> +       _cp_reflink $SCRATCH_MNT/foo $mnt1/bar
> +       echo Checksum of reflinked files
> +       md5sum $SCRATCH_MNT/foo | _filter_scratch
> +       md5sum $mnt1/bar | _filter_test_dir
> +
> +       check_fsid $SCRATCH_DEV
> +}
> +
> +same_dev_subvol_mount()
> +{
> +       echo ---- $FUNCNAME ----
> +       _scratch_mkfs >> $seqres.full 2>&1
> +
> +       _scratch_mount
> +       $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/subvol | _filter_scratch
> +
> +       $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' $SCRATCH_MNT/subvol/foo | \
> +                                                               _filter_xfs_io
> +
> +       echo Mounting a subvol
> +       _mount -o subvol=subvol $SCRATCH_DEV $mnt1
> +
> +       _cp_reflink $SCRATCH_MNT/subvol/foo $mnt1/bar
> +       echo Checksum of reflinked files
> +       md5sum $SCRATCH_MNT/subvol/foo | _filter_scratch
> +       md5sum $mnt1/bar | _filter_test_dir
> +
> +       check_fsid $SCRATCH_DEV
> +}
> +
> +same_dev_mount
> +
> +_scratch_unmount
> +_cleanup
> +mkdir -p $mnt1
> +
> +same_dev_subvol_mount
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/311.out b/tests/btrfs/311.out
> new file mode 100644
> index 000000000000..4ea46eab3c72
> --- /dev/null
> +++ b/tests/btrfs/311.out
> @@ -0,0 +1,24 @@
> +QA output created by 311
> +---- same_dev_mount ----
> +wrote 9000/9000 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +Mount the device again to a different mount point
> +Checksum of reflinked files
> +42d69d1a6d333a7ebdf64792a555e392  SCRATCH_MNT/foo
> +42d69d1a6d333a7ebdf64792a555e392  TEST_DIR/311/mnt1/bar
> +On disk fsid:          FSID
> +Metadata uuid:         FSID
> +Temp fsid:             FSID
> +Tempfsid status:       0
> +---- same_dev_subvol_mount ----
> +Create subvolume 'SCRATCH_MNT/subvol'
> +wrote 9000/9000 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +Mounting a subvol
> +Checksum of reflinked files
> +42d69d1a6d333a7ebdf64792a555e392  SCRATCH_MNT/subvol/foo
> +42d69d1a6d333a7ebdf64792a555e392  TEST_DIR/311/mnt1/bar
> +On disk fsid:          FSID
> +Metadata uuid:         FSID
> +Temp fsid:             FSID
> +Tempfsid status:       0
> --
> 2.39.3
>
diff mbox series

Patch

diff --git a/tests/btrfs/311 b/tests/btrfs/311
new file mode 100755
index 000000000000..bdabcf6a9814
--- /dev/null
+++ b/tests/btrfs/311
@@ -0,0 +1,88 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2024 Oracle. All Rights Reserved.
+#
+# FS QA Test 311
+#
+# Mount the device twice check if the reflink works, this helps to
+# ensure device is mounted as the same device.
+#
+. ./common/preamble
+_begin_fstest auto quick subvol tempfsid
+
+# Override the default cleanup function.
+_cleanup()
+{
+	cd /
+	$UMOUNT_PROG $mnt1 > /dev/null 2>&1
+	rm -r -f $tmp.*
+	rm -r -f $mnt1
+}
+
+. ./common/filter.btrfs
+. ./common/reflink
+
+# Modify as appropriate.
+_supported_fs btrfs
+_require_cp_reflink
+_require_btrfs_sysfs_fsid
+_require_btrfs_fs_feature temp_fsid
+_require_scratch
+
+mnt1=$TEST_DIR/$seq/mnt1
+mkdir -p $mnt1
+
+same_dev_mount()
+{
+	echo ---- $FUNCNAME ----
+
+	_scratch_mkfs >> $seqres.full 2>&1
+
+	_scratch_mount
+	$XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' $SCRATCH_MNT/foo | \
+								_filter_xfs_io
+
+	echo Mount the device again to a different mount point
+	_mount $SCRATCH_DEV $mnt1
+
+	_cp_reflink $SCRATCH_MNT/foo $mnt1/bar
+	echo Checksum of reflinked files
+	md5sum $SCRATCH_MNT/foo | _filter_scratch
+	md5sum $mnt1/bar | _filter_test_dir
+
+	check_fsid $SCRATCH_DEV
+}
+
+same_dev_subvol_mount()
+{
+	echo ---- $FUNCNAME ----
+	_scratch_mkfs >> $seqres.full 2>&1
+
+	_scratch_mount
+	$BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/subvol | _filter_scratch
+
+	$XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' $SCRATCH_MNT/subvol/foo | \
+								_filter_xfs_io
+
+	echo Mounting a subvol
+	_mount -o subvol=subvol $SCRATCH_DEV $mnt1
+
+	_cp_reflink $SCRATCH_MNT/subvol/foo $mnt1/bar
+	echo Checksum of reflinked files
+	md5sum $SCRATCH_MNT/subvol/foo | _filter_scratch
+	md5sum $mnt1/bar | _filter_test_dir
+
+	check_fsid $SCRATCH_DEV
+}
+
+same_dev_mount
+
+_scratch_unmount
+_cleanup
+mkdir -p $mnt1
+
+same_dev_subvol_mount
+
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/311.out b/tests/btrfs/311.out
new file mode 100644
index 000000000000..4ea46eab3c72
--- /dev/null
+++ b/tests/btrfs/311.out
@@ -0,0 +1,24 @@ 
+QA output created by 311
+---- same_dev_mount ----
+wrote 9000/9000 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Mount the device again to a different mount point
+Checksum of reflinked files
+42d69d1a6d333a7ebdf64792a555e392  SCRATCH_MNT/foo
+42d69d1a6d333a7ebdf64792a555e392  TEST_DIR/311/mnt1/bar
+On disk fsid:		FSID
+Metadata uuid:		FSID
+Temp fsid:		FSID
+Tempfsid status:	0
+---- same_dev_subvol_mount ----
+Create subvolume 'SCRATCH_MNT/subvol'
+wrote 9000/9000 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Mounting a subvol
+Checksum of reflinked files
+42d69d1a6d333a7ebdf64792a555e392  SCRATCH_MNT/subvol/foo
+42d69d1a6d333a7ebdf64792a555e392  TEST_DIR/311/mnt1/bar
+On disk fsid:		FSID
+Metadata uuid:		FSID
+Temp fsid:		FSID
+Tempfsid status:	0