@@ -78,6 +78,8 @@ Preparing system for tests (IRIX and Linux):
added to the end of fsstresss and fsx invocations, respectively,
in case you wish to exclude certain operational modes from these
tests.
+ - setenv LOGWRITES_DEV to a block device to use for power fail
+ testing.
- or add a case to the switch in common/config assigning
these variables based on the hostname of your test
@@ -190,6 +190,7 @@ export DMSETUP_PROG="`set_prog_path dmsetup`"
export WIPEFS_PROG="`set_prog_path wipefs`"
export DUMP_PROG="`set_prog_path dump`"
export RESTORE_PROG="`set_prog_path restore`"
+export REPLAYLOG_PROG="`set_prog_path replay-log`"
# Generate a comparable xfsprogs version number in the form of
# major * 10000 + minor * 100 + release
new file mode 100644
@@ -0,0 +1,80 @@
+##/bin/bash
+#
+# Copyright (c) 2015 Facebook, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#
+# common functions for setting up and tearing down a dm log-writes device
+
+_init_log_writes()
+{
+ local BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
+ LOGWRITES_NAME=logwrites-test
+ LOGWRITES_DMDEV=/dev/mapper/$LOGWRITES_NAME
+ LOGWRITES_TABLE="0 $BLK_DEV_SIZE log-writes $SCRATCH_DEV $LOGWRITES_DEV"
+ $DMSETUP_PROG create $LOGWRITES_NAME --table "$LOGWRITES_TABLE" || \
+ _fatal "failed to create log-writes device"
+ $DMSETUP_PROG mknodes > /dev/null 2>&1
+}
+
+_log_writes_mark()
+{
+ [ $# -ne 1 ] && _fatal "_log_writes_mark takes one argument"
+ $DMSETUP_PROG message $LOGWRITES_NAME 0 mark $1
+}
+
+_log_writes_mkfs()
+{
+ _scratch_options mkfs
+ _mkfs_dev $SCRATCH_OPTIONS $LOGWRITES_DMDEV
+ _log_writes_mark mkfs
+}
+
+_mount_log_writes()
+{
+ mount -t $FSTYP $MOUNT_OPTIONS $* $LOGWRITES_DMDEV $SCRATCH_MNT
+}
+
+_unmount_log_writes()
+{
+ $UMOUNT_PROG $SCRATCH_MNT
+}
+
+# _replay_log <mark>
+#
+# This replays the log contained on $INTEGRITY_DEV onto $SCRATCH_DEV upto the
+# mark passed in.
+_replay_log()
+{
+ _mark=$1
+
+ $REPLAYLOG_PROG --log $LOGWRITES_DEV --replay $SCRATCH_DEV \
+ --end-mark $_mark > /dev/null 2>&1
+ [ $? -ne 0 ] && _fatal "replay failed"
+}
+
+_log_writes_remove()
+{
+ $DMSETUP_PROG remove $LOGWRITES_NAME > /dev/null 2>&1
+ $DMSETUP_PROG mknodes > /dev/null 2>&1
+}
+
+_cleanup_log_writes()
+{
+ # If dmsetup load fails then we need to make sure to do resume here
+ # otherwise the umount will hang
+ $UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+ _log_writes_remove
+}
@@ -1311,6 +1311,24 @@ _require_dm_flakey()
fi
}
+# this test requires the device mapper log-writes target
+#
+_require_dm_log_writes()
+{
+ [ -z $LOGWRITES_DEV ] && _notrun "This test requires a logwrites dev"
+ _require_block_device $SCRATCH_DEV
+ _require_block_device $LOGWRITES_DEV
+ _require_command $DMSETUP_PROG
+ _require_command $REPLAYLOG_PROG
+
+ modprobe dm-log-writes >/dev/null 2>&1
+ $DMSETUP_PROG targets | grep "log-writes" > /dev/null 2>&1
+ if [ $? -ne 0 ]
+ then
+ _notrun "This test requires dm log-writes support"
+ fi
+}
+
# this test requires the projid32bit feature to be available in mkfs.xfs.
#
_require_projid32bit()
@@ -1545,6 +1563,34 @@ _require_xfs_io_command()
_notrun "xfs_io $command failed (old kernel/wrong fs?)"
}
+_test_falloc_support()
+{
+ if [ $# -ne 1 ]
+ then
+ echo "Usage: _test_falloc_support command" 1>&2
+ exit 1
+ fi
+ command=$1
+
+ testfile=$TEST_DIR/$$.xfs_io
+ case $command in
+ "fpunch" | "fcollapse" | "zero" | "fzero" | "finsert" )
+ testio=`$XFS_IO_PROG -F -f -c "pwrite 0 20k" -c "fsync" \
+ -c "$command 4k 8k" $testfile 2>&1`
+ ;;
+ *)
+ echo "Not a valid falloc command" 1>&2
+ exit 1
+ esac
+
+ rm -f $testfile 2>&1 > /dev/null
+ echo $testio | grep -q "not found" && \
+ return 0
+ echo $testio | grep -q "Operation not supported" && \
+ return 0
+ return 1
+}
+
# check that kernel and filesystem support direct I/O
_require_odirect()
{
@@ -61,15 +61,17 @@ int logcount = 0; /* total ops */
* be careful in how we select the different operations. The active operations
* are mapped to numbers as follows:
*
- * lite !lite
- * READ: 0 0
- * WRITE: 1 1
- * MAPREAD: 2 2
- * MAPWRITE: 3 3
- * TRUNCATE: - 4
- * FALLOCATE: - 5
- * PUNCH HOLE: - 6
- * ZERO RANGE: - 7
+ * lite !lite integrity
+ * READ: 0 0 0
+ * WRITE: 1 1 1
+ * MAPREAD: 2 2 2
+ * MAPWRITE: 3 3 3
+ * TRUNCATE: - 4 4
+ * FALLOCATE: - 5 5
+ * PUNCH HOLE: - 6 6
+ * ZERO RANGE: - 7 7
+ * COLLAPSE RANGE: - 8 8
+ * FSYNC: - - 9
*
* When mapped read/writes are disabled, they are simply converted to normal
* reads and writes. When fallocate/fpunch calls are disabled, they are
@@ -98,6 +100,10 @@ int logcount = 0; /* total ops */
#define OP_INSERT_RANGE 9
#define OP_MAX_FULL 10
+/* integrity operations */
+#define OP_FSYNC 10
+#define OP_MAX_INTEGRITY 11
+
/* operation modifiers */
#define OP_CLOSEOPEN 100
#define OP_SKIPPED 101
@@ -111,6 +117,9 @@ char *original_buf; /* a pointer to the original data */
char *good_buf; /* a pointer to the correct data */
char *temp_buf; /* a pointer to the current data */
char *fname; /* name of our test file */
+char *bname; /* basename of our test file */
+char *logdev; /* -I flag */
+char dname[1024]; /* -P flag */
int fd; /* fd for our test file */
blksize_t block_size = 0;
@@ -149,9 +158,11 @@ int zero_range_calls = 1; /* -z flag disables */
int collapse_range_calls = 1; /* -C flag disables */
int insert_range_calls = 1; /* -I flag disables */
int mapped_reads = 1; /* -R flag disables it */
+int integrity = 0; /* -I flag */
int fsxgoodfd = 0;
int o_direct; /* -Z */
int aio = 0;
+int mark_nr = 0;
int page_size;
int page_mask;
@@ -350,6 +361,9 @@ logdump(void)
lp->args[0] + lp->args[1])
prt("\t******IIII");
break;
+ case OP_FSYNC:
+ prt("FSYNC");
+ break;
case OP_SKIPPED:
prt("SKIPPED (no operation)");
break;
@@ -429,6 +443,42 @@ report_failure(int status)
*(((unsigned char *)(cp)) + 1)))
void
+mark_log(void)
+{
+ char command[256];
+ int ret;
+
+ snprintf(command, 256, "dmsetup message %s 0 mark %s.mark%d", logdev,
+ bname, mark_nr);
+ ret = system(command);
+ if (ret) {
+ prterr("dmsetup mark failed");
+ exit(1);
+ }
+}
+
+void
+dump_fsync_buffer(void)
+{
+ char fname_buffer[1024];
+ int good_fd;
+
+ if (!good_buf)
+ return;
+
+ snprintf(fname_buffer, 1024, "%s%s.mark%d", dname,
+ bname, mark_nr);
+ good_fd = open(fname_buffer, O_WRONLY|O_CREAT|O_TRUNC, 0666);
+ if (good_fd < 0) {
+ prterr(fname_buffer);
+ exit(1);
+ }
+
+ save_buffer(good_buf, file_size, good_fd);
+ close(good_fd);
+}
+
+void
check_buffers(unsigned offset, unsigned size)
{
unsigned char c, t;
@@ -1183,6 +1233,26 @@ docloseopen(void)
}
}
+void
+dofsync(void)
+{
+ int ret;
+
+ if (testcalls <= simulatedopcount)
+ return;
+ if (debug)
+ prt("%lu fsync\n", testcalls);
+ log4(OP_FSYNC, 0, 0, 0);
+ ret = fsync(fd);
+ if (ret < 0) {
+ prterr("dofsync");
+ report_failure(190);
+ }
+ mark_log();
+ dump_fsync_buffer();
+ printf("Dumped fsync buffer mark %d\n", mark_nr);
+ mark_nr++;
+}
#define TRIM_OFF(off, size) \
do { \
@@ -1233,8 +1303,10 @@ test(void)
/* calculate appropriate op to run */
if (lite)
op = rv % OP_MAX_LITE;
- else
+ else if (!integrity)
op = rv % OP_MAX_FULL;
+ else
+ op = rv % OP_MAX_INTEGRITY;
switch (op) {
case OP_MAPREAD:
@@ -1343,6 +1415,9 @@ test(void)
do_insert_range(offset, size);
break;
+ case OP_FSYNC:
+ dofsync();
+ break;
default:
prterr("test: unknown operation");
report_failure(42);
@@ -1372,7 +1447,7 @@ void
usage(void)
{
fprintf(stdout, "usage: %s",
- "fsx [-dnqxAFLOWZ] [-b opnum] [-c Prob] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
+ "fsx [-dnqxAFLOWZ] [-b opnum] [-c Prob] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] [-I logdev] fname\n\
-b opnum: beginning operation number (default 1)\n\
-c P: 1 in P chance of file close+open at each op (default infinity)\n\
-d: debug output for all operations\n\
@@ -1417,6 +1492,7 @@ usage(void)
-W: mapped write operations DISabled\n\
-R: read() system calls only (mapped reads disabled)\n\
-Z: O_DIRECT (use -R, -W, -r and -w too)\n\
+ -i logdev: do integrity testing, logdev is the dm log writes device\n\
fname: this filename is REQUIRED (no default)\n");
exit(90);
}
@@ -1580,13 +1656,14 @@ int
main(int argc, char **argv)
{
int i, style, ch;
- char *endp;
+ char *endp, *tmp;
char goodfile[1024];
char logfile[1024];
struct stat statbuf;
goodfile[0] = 0;
logfile[0] = 0;
+ dname[0] = 0;
page_size = getpagesize();
page_mask = page_size - 1;
@@ -1595,7 +1672,7 @@ main(int argc, char **argv)
setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
- while ((ch = getopt(argc, argv, "b:c:dfl:m:no:p:qr:s:t:w:xyAD:FKHzCILN:OP:RS:WZ"))
+ while ((ch = getopt(argc, argv, "b:c:dfl:m:no:p:qr:s:t:w:xyAD:FKHzCILN:OP:RS:WZi:"))
!= EOF)
switch (ch) {
case 'b':
@@ -1719,10 +1796,11 @@ main(int argc, char **argv)
randomoplen = 0;
break;
case 'P':
- strncpy(goodfile, optarg, sizeof(goodfile));
- strcat(goodfile, "/");
- strncpy(logfile, optarg, sizeof(logfile));
- strcat(logfile, "/");
+ strncpy(dname, optarg, sizeof(dname));
+ strcat(dname, "/");
+
+ strncpy(goodfile, dname, sizeof(goodfile));
+ strncpy(logfile, dname, sizeof(logfile));
break;
case 'R':
mapped_reads = 0;
@@ -1744,6 +1822,14 @@ main(int argc, char **argv)
case 'Z':
o_direct = O_DIRECT;
break;
+ case 'i':
+ integrity = 1;
+ logdev = strdup(optarg);
+ if (!logdev) {
+ prterr("malloc");
+ exit(1);
+ }
+ break;
default:
usage();
/* NOTREACHED */
@@ -1753,6 +1839,12 @@ main(int argc, char **argv)
if (argc != 1)
usage();
fname = argv[0];
+ tmp = strdup(fname);
+ if (!tmp) {
+ prterr("strdup");
+ exit(1);
+ }
+ bname = basename(tmp);
signal(SIGHUP, cleanup);
signal(SIGINT, cleanup);
@@ -1795,14 +1887,14 @@ main(int argc, char **argv)
}
}
#endif
- strncat(goodfile, fname, 256);
+ strncat(goodfile, bname, 256);
strcat (goodfile, ".fsxgood");
fsxgoodfd = open(goodfile, O_RDWR|O_CREAT|O_TRUNC, 0666);
if (fsxgoodfd < 0) {
prterr(goodfile);
exit(92);
}
- strncat(logfile, fname, 256);
+ strncat(logfile, bname, 256);
strcat (logfile, ".fsxlog");
fsxlogf = fopen(logfile, "w");
if (fsxlogf == NULL) {
@@ -1874,6 +1966,7 @@ main(int argc, char **argv)
while (numops == -1 || numops--)
test();
+ free(tmp);
if (close(fd)) {
prterr("close");
report_failure(99);
new file mode 100644
@@ -0,0 +1,130 @@
+#! /bin/bash
+# FS QA Test No. 326
+#
+# Run fsx with log writes to verify power fail safeness.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Facebook. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+status=1 # failure is the default!
+
+_cleanup()
+{
+ _cleanup_log_writes
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/dmlogwrites
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_need_to_be_root
+_require_scratch_nocheck
+_require_dm_log_writes
+
+rm -f $seqres.full
+rm -rf $TEST_DIR/fsxtests
+
+_check_files()
+{
+ _name=$1
+ # Now look for our files
+ for i in $(find $SANITY_DIR -type f | grep $_name | grep mark)
+ do
+ filename=$(basename $i)
+ mark="${filename##*.}"
+ echo "checking $filename" >> $seqres.full
+ _replay_log $filename
+ _scratch_mount
+ expected_md5=$(md5sum $i | cut -f 1 -d ' ')
+ md5=$(md5sum $SCRATCH_MNT/$_name | cut -f 1 -d ' ')
+ [ "${md5}x" != "${expected_md5}x" ] && _fatal "md5sum mismatched"
+ _scratch_unmount
+ _check_scratch_fs
+ done
+}
+
+SANITY_DIR=$TEST_DIR/fsxtests
+mkdir $SANITY_DIR
+
+# Create the log
+_init_log_writes
+
+_log_writes_mkfs >> $seqres.full 2>&1
+
+# Log writes emulates discard support, turn it on for maximum crying.
+_mount_log_writes -o discard
+
+FSX_OPTS=""
+[ $(_test_falloc_support "fpunch") ] || FSX_OPTS="-H"
+[ $(_test_falloc_support "fcollapse") ] || FSX_OPTS="$FSX_OPTS -C"
+[ $(_test_falloc_support "fzero") ] || FSX_OPTS="$FSX_OPTS -z"
+[ $(_test_falloc_support "finsert") ] || FSX_OPTS="$FSX_OPTS -I"
+
+# Run fsx for a while
+run_check $here/ltp/fsx -P $SANITY_DIR -N 300 -S 0 -i $LOGWRITES_DMDEV \
+ $FSX_OPTS $SCRATCH_MNT/testfile1 &
+run_check $here/ltp/fsx -P $SANITY_DIR -N 300 -S 0 -i $LOGWRITES_DMDEV \
+ $FSX_OPTS $SCRATCH_MNT/testfile2 &
+run_check $here/ltp/fsx -P $SANITY_DIR -N 300 -S 0 -i $LOGWRITES_DMDEV \
+ $FSX_OPTS $SCRATCH_MNT/testfile3 &
+run_check $here/ltp/fsx -P $SANITY_DIR -N 300 -S 0 -i $LOGWRITES_DMDEV \
+ $FSX_OPTS $SCRATCH_MNT/testfile4 &
+wait
+test1_md5=$(md5sum $SCRATCH_MNT/testfile1 | cut -f 1 -d ' ')
+test2_md5=$(md5sum $SCRATCH_MNT/testfile2 | cut -f 1 -d ' ')
+test3_md5=$(md5sum $SCRATCH_MNT/testfile3 | cut -f 1 -d ' ')
+test4_md5=$(md5sum $SCRATCH_MNT/testfile4 | cut -f 1 -d ' ')
+
+# Unmount the scratch dir and tear down the log writes target
+_unmount_log_writes
+_log_writes_mark end
+_log_writes_remove
+
+for i in testfile1 testfile2 testfile3 testfile4
+do
+ _check_files $i
+done
+
+# Check the end
+_replay_log end
+_scratch_mount
+md5=$(md5sum $SCRATCH_MNT/testfile1 | cut -f 1 -d ' ')
+[ "${md5}x" != "${test1_md5}x" ] && _fatal "testfile1 end md5sum mismatched"
+md5=$(md5sum $SCRATCH_MNT/testfile2 | cut -f 1 -d ' ')
+[ "${md5}x" != "${test2_md5}x" ] && _fatal "testfile2 end md5sum mismatched"
+md5=$(md5sum $SCRATCH_MNT/testfile3 | cut -f 1 -d ' ')
+[ "${md5}x" != "${test3_md5}x" ] && _fatal "testfile3 end md5sum mismatched"
+md5=$(md5sum $SCRATCH_MNT/testfile4 | cut -f 1 -d ' ')
+[ "${md5}x" != "${test4_md5}x" ] && _fatal "testfile4 end md5sum mismatched"
+_scratch_unmount
+_check_scratch_fs
+
+echo "Silence is golden"
+status=0
+exit
+
new file mode 100644
@@ -0,0 +1,2 @@
+QA output created by 326
+Silence is golden
@@ -183,3 +183,4 @@
323 auto aio stress
324 auto fsr quick
325 auto quick data log
+326 auto log
This patch adds the supporting code for using the dm-log-writes target. The bash stuff is similar to the dmflakey code, it just gives us functions to build and tear down a dm-log-writes target. We add a new LOGWRITES_DEV variable to take in the device we will use as the log and add checks for that. I've rigged up fsx to have an integrity check mode. Basically it works like it normally works, but when it fsync()'s it marks the log with a unique mark and dumps it's buffer to a file with the mark in the filename. I did this with a system() call simply because it was the fastest. I can link the device-mapper libraries and do it programatically if that would be preferred, but this works pretty well. The test itself just runs 200 ops and exits, then finds all of the good buffers in the directory we provided and replays up to the mark given, mounts the file system and compares the md5sum, unmounts and fsck's to check for metadata integrity. dm-log-writes will pretend to do discard and the replay tool will replay it properly depending on the underlying device, either by writing 0's or actually calling the discard ioctl, so I've enabled discard in the test for maximum fun. This test relies on the supporting userspace code I've written for dm-logs-writes. It can be found here https://github.com/josefbacik/log-writes.git Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> --- README | 2 + common/config | 1 + common/dmlogwrites | 80 ++++++++++++++++++++++++++++++ common/rc | 46 ++++++++++++++++++ ltp/fsx.c | 131 ++++++++++++++++++++++++++++++++++++++++++-------- tests/generic/326 | 130 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/326.out | 2 + tests/generic/group | 1 + 8 files changed, 374 insertions(+), 19 deletions(-) create mode 100644 common/dmlogwrites create mode 100644 tests/generic/326 create mode 100644 tests/generic/326.out