| Message ID | 1436453473-27509-1-git-send-email-fdmanana@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Jul 09, 2015 at 03:51:13PM +0100, fdmanana@kernel.org wrote: > From: Filipe Manana <fdmanana@suse.com> > > Regression test for adding and dropping an equal number of references > for file extents. Verify that if we drop N references for a file extent > and we add too N new references for that same file extent in the same > transaction, running the delayed references (which always happens at > transaction commit time) does not fail. > > The regression was introduced in the 4.2-rc1 Linux kernel and fixed by > the patch titled: "Btrfs: fix order by which delayed references are run". > > Signed-off-by: Filipe Manana <fdmanana@suse.com> > --- > tests/btrfs/095 | 153 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/btrfs/095.out | 9 ++++ > tests/btrfs/group | 1 + > 3 files changed, 163 insertions(+) > create mode 100755 tests/btrfs/095 > create mode 100644 tests/btrfs/095.out > > diff --git a/tests/btrfs/095 b/tests/btrfs/095 > new file mode 100755 > index 0000000..e68f2bf > --- /dev/null > +++ b/tests/btrfs/095 > @@ -0,0 +1,153 @@ > +#! /bin/bash > +# FSQA Test No. 095 > +# > +# Regression test for adding and dropping an equal number of references for > +# file extents. Verify that if we drop N references for a file extent and we > +# add too N new references for that same file extent in the same transaction, > +# running the delayed references (always happens at transaction commit time) > +# does not fail. > +# > +# The regression was introduced in the 4.2-rc1 Linux kernel. > +# > +#----------------------------------------------------------------------- > +# > +# Copyright (C) 2015 SUSE Linux Products GmbH. All Rights Reserved. > +# Author: Filipe Manana <fdmanana@suse.com> > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#----------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + _cleanup_flakey > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > +. ./common/dmflakey > + > +# real QA test starts here > +_need_to_be_root > +_supported_fs btrfs > +_supported_os Linux > +_require_scratch > +_require_dm_flakey > +_require_cloner > +_require_metadata_journaling $SCRATCH_DEV > + > +rm -f $seqres.full > + > +_scratch_mkfs >>$seqres.full 2>&1 > +_init_flakey > +_mount_flakey > + > +# Create prealloc extent covering range [160K, 620K[ > +$XFS_IO_PROG -f -c "falloc 160K 460K" $SCRATCH_MNT/foo You're using falloc, so I think you need _require_xfs_io_command "falloc". Otherwise, Reviewed-by: Omar Sandoval <osandov@fb.com> > + > +# Now write to the last 80K of the prealloc extent plus 40K to the unallocated > +# space that immediately follows it. This creates a new extent of 40K that spans > +# the range [620K, 660K[. > +$XFS_IO_PROG -c "pwrite -S 0xaa 540K 120K" $SCRATCH_MNT/foo | _filter_xfs_io > + > +# At this point, there are now 2 back references to the prealloc extent in our > +# extent tree. Both are for our file offset 160K and one relates to a file > +# extent item with a data offset of 0 and a length of 380K, while the other > +# relates to a file extent item with a data offset of 380K and a length of 80K. > + > +# Make sure everything done so far is durably persisted (all back references are > +# in the extent tree, etc). > +sync > + > +# Now clone all extents of our file that cover the offset 160K up to its eof > +# (660K at this point) into itself at offset 2M. This leaves a hole in the file > +# covering the range [660K, 2M[. The prealloc extent will now be referenced by > +# the file twice, once for offset 160K and once for offset 2M. The 40K extent > +# that follows the prealloc extent will also be referenced twice by our file, > +# once for offset 620K and once for offset 2M + 460K. > +$CLONER_PROG -s $((160 * 1024)) -d $((2 * 1024 * 1024)) -l 0 $SCRATCH_MNT/foo \ > + $SCRATCH_MNT/foo > + > +# Now create one new extent in our file with a size of 100Kb. It will span the > +# range [3M, 3M + 100K[. It also will cause creation of a hole spanning the > +# range [2M + 460K, 3M[. Our new file size is 3M + 100K. > +$XFS_IO_PROG -c "pwrite -S 0xbb 3M 100K" $SCRATCH_MNT/foo | _filter_xfs_io > + > +# At this point, there are now (in memory) 4 back references to the prealloc > +# extent. > +# > +# Two of them are for file offset 160K, related to file extent items > +# matching the file offsets 160K and 540K respectively, with data offsets of > +# 0 and 380K respectively, and with lengths of 380K and 80K respectively. > +# > +# The other two references are for file offset 2M, related to file extent items > +# matching the file offsets 2M and 2M + 380K respectively, with data offsets of > +# 0 and 380K respectively, and with lengths of 389K and 80K respectively. > +# > +# The 40K extent has 2 back references, one for file offset 620K and the other > +# for file offset 2M + 460K. > +# > +# The 100K extent has a single back reference and it relates to file offset 3M. > + > +# Now clone our 100K extent into offset 600K. That offset covers the last 20K > +# of the prealloc extent, the whole 40K extent and 40K of the hole starting at > +# offset 660K. > +$CLONER_PROG -s $((3 * 1024 * 1024)) -d $((600 * 1024)) -l $((100 * 1024)) \ > + $SCRATCH_MNT/foo $SCRATCH_MNT/foo > + > +# At this point there's only one reference to the 40K extent, at file offset > +# 2M + 460K, we have 4 references for the prealloc extent (2 for file offset > +# 160K and 2 for file offset 2M) and 2 references for the 100K extent (1 for > +# file offset 3M and a new one for file offset 600K). > + > +# Now fsync our file to make all its new data and metadata updates are durably > +# persisted and present if a power failure/crash happens after a successful > +# fsync and before the next transaction commit. > +$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo > + > +echo "File digest before power failure:" > +md5sum $SCRATCH_MNT/foo | _filter_scratch > + > +# Silently drop all writes and ummount to simulate a crash/power failure. > +_load_flakey_table $FLAKEY_DROP_WRITES > +_unmount_flakey > + > +# Allow writes again, mount to trigger log replay and validate file contents. > +# During log replay, the btrfs delayed references implementation used to run the > +# deletion of back references before the addition of new back references, which > +# made the addition fail as it didn't find the key in the extent tree that it > +# was looking for. The failure triggered by this test was related to the 40K > +# extent, which got 1 reference dropped and 1 reference added during the fsync > +# log replay - when running the delayed references at transaction commit time, > +# btrfs was applying the deletion before the insertion, resulting in a failure > +# of the insertion that ended up turning the fs into read-only mode. > +_load_flakey_table $FLAKEY_ALLOW_WRITES > +_mount_flakey > + > +echo "File digest after log replay:" > +md5sum $SCRATCH_MNT/foo | _filter_scratch > + > +_unmount_flakey > + > +status=0 > +exit > diff --git a/tests/btrfs/095.out b/tests/btrfs/095.out > new file mode 100644 > index 0000000..e93435c > --- /dev/null > +++ b/tests/btrfs/095.out > @@ -0,0 +1,9 @@ > +QA output created by 095 > +wrote 122880/122880 bytes at offset 552960 > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > +wrote 102400/102400 bytes at offset 3145728 > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) > +File digest before power failure: > +beaf47c36659ac29bb9363fb8ffa10a1 SCRATCH_MNT/foo > +File digest after log replay: > +beaf47c36659ac29bb9363fb8ffa10a1 SCRATCH_MNT/foo > diff --git a/tests/btrfs/group b/tests/btrfs/group > index ffe18bf..79feea9 100644 > --- a/tests/btrfs/group > +++ b/tests/btrfs/group > @@ -96,3 +96,4 @@ > 092 auto quick send > 093 auto quick clone > 094 auto quick send > +095 auto quick metadata > -- > 2.1.3 > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jul 24, 2015 at 10:40 PM, Omar Sandoval <osandov@fb.com> wrote: > On Thu, Jul 09, 2015 at 03:51:13PM +0100, fdmanana@kernel.org wrote: >> From: Filipe Manana <fdmanana@suse.com> >> >> Regression test for adding and dropping an equal number of references >> for file extents. Verify that if we drop N references for a file extent >> and we add too N new references for that same file extent in the same >> transaction, running the delayed references (which always happens at >> transaction commit time) does not fail. >> >> The regression was introduced in the 4.2-rc1 Linux kernel and fixed by >> the patch titled: "Btrfs: fix order by which delayed references are run". >> >> Signed-off-by: Filipe Manana <fdmanana@suse.com> >> --- >> tests/btrfs/095 | 153 ++++++++++++++++++++++++++++++++++++++++++++++++++++ >> tests/btrfs/095.out | 9 ++++ >> tests/btrfs/group | 1 + >> 3 files changed, 163 insertions(+) >> create mode 100755 tests/btrfs/095 >> create mode 100644 tests/btrfs/095.out >> >> diff --git a/tests/btrfs/095 b/tests/btrfs/095 >> new file mode 100755 >> index 0000000..e68f2bf >> --- /dev/null >> +++ b/tests/btrfs/095 >> @@ -0,0 +1,153 @@ >> +#! /bin/bash >> +# FSQA Test No. 095 >> +# >> +# Regression test for adding and dropping an equal number of references for >> +# file extents. Verify that if we drop N references for a file extent and we >> +# add too N new references for that same file extent in the same transaction, >> +# running the delayed references (always happens at transaction commit time) >> +# does not fail. >> +# >> +# The regression was introduced in the 4.2-rc1 Linux kernel. >> +# >> +#----------------------------------------------------------------------- >> +# >> +# Copyright (C) 2015 SUSE Linux Products GmbH. All Rights Reserved. >> +# Author: Filipe Manana <fdmanana@suse.com> >> +# >> +# This program is free software; you can redistribute it and/or >> +# modify it under the terms of the GNU General Public License as >> +# published by the Free Software Foundation. >> +# >> +# This program is distributed in the hope that it would be useful, >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> +# GNU General Public License for more details. >> +# >> +# You should have received a copy of the GNU General Public License >> +# along with this program; if not, write the Free Software Foundation, >> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA >> +#----------------------------------------------------------------------- >> +# >> + >> +seq=`basename $0` >> +seqres=$RESULT_DIR/$seq >> +echo "QA output created by $seq" >> +tmp=/tmp/$$ >> +status=1 # failure is the default! >> +trap "_cleanup; exit \$status" 0 1 2 3 15 >> + >> +_cleanup() >> +{ >> + _cleanup_flakey >> + rm -f $tmp.* >> +} >> + >> +# get standard environment, filters and checks >> +. ./common/rc >> +. ./common/filter >> +. ./common/dmflakey >> + >> +# real QA test starts here >> +_need_to_be_root >> +_supported_fs btrfs >> +_supported_os Linux >> +_require_scratch >> +_require_dm_flakey >> +_require_cloner >> +_require_metadata_journaling $SCRATCH_DEV >> + >> +rm -f $seqres.full >> + >> +_scratch_mkfs >>$seqres.full 2>&1 >> +_init_flakey >> +_mount_flakey >> + >> +# Create prealloc extent covering range [160K, 620K[ >> +$XFS_IO_PROG -f -c "falloc 160K 460K" $SCRATCH_MNT/foo > > You're using falloc, so I think you need _require_xfs_io_command "falloc". Indeed, I forgot it. Thanks! Added to v2. > Otherwise, > > Reviewed-by: Omar Sandoval <osandov@fb.com> > >> + >> +# Now write to the last 80K of the prealloc extent plus 40K to the unallocated >> +# space that immediately follows it. This creates a new extent of 40K that spans >> +# the range [620K, 660K[. >> +$XFS_IO_PROG -c "pwrite -S 0xaa 540K 120K" $SCRATCH_MNT/foo | _filter_xfs_io >> + >> +# At this point, there are now 2 back references to the prealloc extent in our >> +# extent tree. Both are for our file offset 160K and one relates to a file >> +# extent item with a data offset of 0 and a length of 380K, while the other >> +# relates to a file extent item with a data offset of 380K and a length of 80K. >> + >> +# Make sure everything done so far is durably persisted (all back references are >> +# in the extent tree, etc). >> +sync >> + >> +# Now clone all extents of our file that cover the offset 160K up to its eof >> +# (660K at this point) into itself at offset 2M. This leaves a hole in the file >> +# covering the range [660K, 2M[. The prealloc extent will now be referenced by >> +# the file twice, once for offset 160K and once for offset 2M. The 40K extent >> +# that follows the prealloc extent will also be referenced twice by our file, >> +# once for offset 620K and once for offset 2M + 460K. >> +$CLONER_PROG -s $((160 * 1024)) -d $((2 * 1024 * 1024)) -l 0 $SCRATCH_MNT/foo \ >> + $SCRATCH_MNT/foo >> + >> +# Now create one new extent in our file with a size of 100Kb. It will span the >> +# range [3M, 3M + 100K[. It also will cause creation of a hole spanning the >> +# range [2M + 460K, 3M[. Our new file size is 3M + 100K. >> +$XFS_IO_PROG -c "pwrite -S 0xbb 3M 100K" $SCRATCH_MNT/foo | _filter_xfs_io >> + >> +# At this point, there are now (in memory) 4 back references to the prealloc >> +# extent. >> +# >> +# Two of them are for file offset 160K, related to file extent items >> +# matching the file offsets 160K and 540K respectively, with data offsets of >> +# 0 and 380K respectively, and with lengths of 380K and 80K respectively. >> +# >> +# The other two references are for file offset 2M, related to file extent items >> +# matching the file offsets 2M and 2M + 380K respectively, with data offsets of >> +# 0 and 380K respectively, and with lengths of 389K and 80K respectively. >> +# >> +# The 40K extent has 2 back references, one for file offset 620K and the other >> +# for file offset 2M + 460K. >> +# >> +# The 100K extent has a single back reference and it relates to file offset 3M. >> + >> +# Now clone our 100K extent into offset 600K. That offset covers the last 20K >> +# of the prealloc extent, the whole 40K extent and 40K of the hole starting at >> +# offset 660K. >> +$CLONER_PROG -s $((3 * 1024 * 1024)) -d $((600 * 1024)) -l $((100 * 1024)) \ >> + $SCRATCH_MNT/foo $SCRATCH_MNT/foo >> + >> +# At this point there's only one reference to the 40K extent, at file offset >> +# 2M + 460K, we have 4 references for the prealloc extent (2 for file offset >> +# 160K and 2 for file offset 2M) and 2 references for the 100K extent (1 for >> +# file offset 3M and a new one for file offset 600K). >> + >> +# Now fsync our file to make all its new data and metadata updates are durably >> +# persisted and present if a power failure/crash happens after a successful >> +# fsync and before the next transaction commit. >> +$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo >> + >> +echo "File digest before power failure:" >> +md5sum $SCRATCH_MNT/foo | _filter_scratch >> + >> +# Silently drop all writes and ummount to simulate a crash/power failure. >> +_load_flakey_table $FLAKEY_DROP_WRITES >> +_unmount_flakey >> + >> +# Allow writes again, mount to trigger log replay and validate file contents. >> +# During log replay, the btrfs delayed references implementation used to run the >> +# deletion of back references before the addition of new back references, which >> +# made the addition fail as it didn't find the key in the extent tree that it >> +# was looking for. The failure triggered by this test was related to the 40K >> +# extent, which got 1 reference dropped and 1 reference added during the fsync >> +# log replay - when running the delayed references at transaction commit time, >> +# btrfs was applying the deletion before the insertion, resulting in a failure >> +# of the insertion that ended up turning the fs into read-only mode. >> +_load_flakey_table $FLAKEY_ALLOW_WRITES >> +_mount_flakey >> + >> +echo "File digest after log replay:" >> +md5sum $SCRATCH_MNT/foo | _filter_scratch >> + >> +_unmount_flakey >> + >> +status=0 >> +exit >> diff --git a/tests/btrfs/095.out b/tests/btrfs/095.out >> new file mode 100644 >> index 0000000..e93435c >> --- /dev/null >> +++ b/tests/btrfs/095.out >> @@ -0,0 +1,9 @@ >> +QA output created by 095 >> +wrote 122880/122880 bytes at offset 552960 >> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> +wrote 102400/102400 bytes at offset 3145728 >> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) >> +File digest before power failure: >> +beaf47c36659ac29bb9363fb8ffa10a1 SCRATCH_MNT/foo >> +File digest after log replay: >> +beaf47c36659ac29bb9363fb8ffa10a1 SCRATCH_MNT/foo >> diff --git a/tests/btrfs/group b/tests/btrfs/group >> index ffe18bf..79feea9 100644 >> --- a/tests/btrfs/group >> +++ b/tests/btrfs/group >> @@ -96,3 +96,4 @@ >> 092 auto quick send >> 093 auto quick clone >> 094 auto quick send >> +095 auto quick metadata >> -- >> 2.1.3 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe fstests" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > Omar -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/tests/btrfs/095 b/tests/btrfs/095 new file mode 100755 index 0000000..e68f2bf --- /dev/null +++ b/tests/btrfs/095 @@ -0,0 +1,153 @@ +#! /bin/bash +# FSQA Test No. 095 +# +# Regression test for adding and dropping an equal number of references for +# file extents. Verify that if we drop N references for a file extent and we +# add too N new references for that same file extent in the same transaction, +# running the delayed references (always happens at transaction commit time) +# does not fail. +# +# The regression was introduced in the 4.2-rc1 Linux kernel. +# +#----------------------------------------------------------------------- +# +# Copyright (C) 2015 SUSE Linux Products GmbH. All Rights Reserved. +# Author: Filipe Manana <fdmanana@suse.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + _cleanup_flakey + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/dmflakey + +# real QA test starts here +_need_to_be_root +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_dm_flakey +_require_cloner +_require_metadata_journaling $SCRATCH_DEV + +rm -f $seqres.full + +_scratch_mkfs >>$seqres.full 2>&1 +_init_flakey +_mount_flakey + +# Create prealloc extent covering range [160K, 620K[ +$XFS_IO_PROG -f -c "falloc 160K 460K" $SCRATCH_MNT/foo + +# Now write to the last 80K of the prealloc extent plus 40K to the unallocated +# space that immediately follows it. This creates a new extent of 40K that spans +# the range [620K, 660K[. +$XFS_IO_PROG -c "pwrite -S 0xaa 540K 120K" $SCRATCH_MNT/foo | _filter_xfs_io + +# At this point, there are now 2 back references to the prealloc extent in our +# extent tree. Both are for our file offset 160K and one relates to a file +# extent item with a data offset of 0 and a length of 380K, while the other +# relates to a file extent item with a data offset of 380K and a length of 80K. + +# Make sure everything done so far is durably persisted (all back references are +# in the extent tree, etc). +sync + +# Now clone all extents of our file that cover the offset 160K up to its eof +# (660K at this point) into itself at offset 2M. This leaves a hole in the file +# covering the range [660K, 2M[. The prealloc extent will now be referenced by +# the file twice, once for offset 160K and once for offset 2M. The 40K extent +# that follows the prealloc extent will also be referenced twice by our file, +# once for offset 620K and once for offset 2M + 460K. +$CLONER_PROG -s $((160 * 1024)) -d $((2 * 1024 * 1024)) -l 0 $SCRATCH_MNT/foo \ + $SCRATCH_MNT/foo + +# Now create one new extent in our file with a size of 100Kb. It will span the +# range [3M, 3M + 100K[. It also will cause creation of a hole spanning the +# range [2M + 460K, 3M[. Our new file size is 3M + 100K. +$XFS_IO_PROG -c "pwrite -S 0xbb 3M 100K" $SCRATCH_MNT/foo | _filter_xfs_io + +# At this point, there are now (in memory) 4 back references to the prealloc +# extent. +# +# Two of them are for file offset 160K, related to file extent items +# matching the file offsets 160K and 540K respectively, with data offsets of +# 0 and 380K respectively, and with lengths of 380K and 80K respectively. +# +# The other two references are for file offset 2M, related to file extent items +# matching the file offsets 2M and 2M + 380K respectively, with data offsets of +# 0 and 380K respectively, and with lengths of 389K and 80K respectively. +# +# The 40K extent has 2 back references, one for file offset 620K and the other +# for file offset 2M + 460K. +# +# The 100K extent has a single back reference and it relates to file offset 3M. + +# Now clone our 100K extent into offset 600K. That offset covers the last 20K +# of the prealloc extent, the whole 40K extent and 40K of the hole starting at +# offset 660K. +$CLONER_PROG -s $((3 * 1024 * 1024)) -d $((600 * 1024)) -l $((100 * 1024)) \ + $SCRATCH_MNT/foo $SCRATCH_MNT/foo + +# At this point there's only one reference to the 40K extent, at file offset +# 2M + 460K, we have 4 references for the prealloc extent (2 for file offset +# 160K and 2 for file offset 2M) and 2 references for the 100K extent (1 for +# file offset 3M and a new one for file offset 600K). + +# Now fsync our file to make all its new data and metadata updates are durably +# persisted and present if a power failure/crash happens after a successful +# fsync and before the next transaction commit. +$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo + +echo "File digest before power failure:" +md5sum $SCRATCH_MNT/foo | _filter_scratch + +# Silently drop all writes and ummount to simulate a crash/power failure. +_load_flakey_table $FLAKEY_DROP_WRITES +_unmount_flakey + +# Allow writes again, mount to trigger log replay and validate file contents. +# During log replay, the btrfs delayed references implementation used to run the +# deletion of back references before the addition of new back references, which +# made the addition fail as it didn't find the key in the extent tree that it +# was looking for. The failure triggered by this test was related to the 40K +# extent, which got 1 reference dropped and 1 reference added during the fsync +# log replay - when running the delayed references at transaction commit time, +# btrfs was applying the deletion before the insertion, resulting in a failure +# of the insertion that ended up turning the fs into read-only mode. +_load_flakey_table $FLAKEY_ALLOW_WRITES +_mount_flakey + +echo "File digest after log replay:" +md5sum $SCRATCH_MNT/foo | _filter_scratch + +_unmount_flakey + +status=0 +exit diff --git a/tests/btrfs/095.out b/tests/btrfs/095.out new file mode 100644 index 0000000..e93435c --- /dev/null +++ b/tests/btrfs/095.out @@ -0,0 +1,9 @@ +QA output created by 095 +wrote 122880/122880 bytes at offset 552960 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +wrote 102400/102400 bytes at offset 3145728 +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) +File digest before power failure: +beaf47c36659ac29bb9363fb8ffa10a1 SCRATCH_MNT/foo +File digest after log replay: +beaf47c36659ac29bb9363fb8ffa10a1 SCRATCH_MNT/foo diff --git a/tests/btrfs/group b/tests/btrfs/group index ffe18bf..79feea9 100644 --- a/tests/btrfs/group +++ b/tests/btrfs/group @@ -96,3 +96,4 @@ 092 auto quick send 093 auto quick clone 094 auto quick send +095 auto quick metadata