@@ -16,3 +16,31 @@ use the same partitions as base fs for overlayfs directories
and set TEST_DIR/SCRATCH_MNT values to overlay mount points, i.e.:
/mnt/test/ovl-mnt and /mnt/scratch/ovl-mnt, for the context of
individual tests.
+
+'./check -overlay' does not support mkfs and fsck on the base fs, so
+the base fs should be pre-formatted before starting the -overlay run.
+An easy way to accomplish this is by running './check <some test>' once,
+before running './check -overlay'.
+
+Because of the lack of mkfs support, multi-section config files are only
+partly supported with './check -overlay'. Only multi-section files that
+do not change FSTYP and MKFS_OPTIONS can be safely used with -overlay.
+
+For example, the following multi-section config file can be used to
+run overlay tests on the same base fs, but with different mount options:
+
+ [xfs]
+ TEST_DEV=/dev/sda5
+ TEST_DIR=/mnt/test
+ SCRATCH_DEV=/dev/sda6
+ SCRATCH_MNT=/mnt/scratch
+ FSTYP=xfs
+
+ [xfs_pquota]
+ MOUNT_OPTIONS="-o pquota"
+ TEST_FS_MOUNT_OPTS="-o noatime"
+ OVERLAY_MOUNT_OPTIONS="-o redirect_dir=off"
+
+In the example above, MOUNT_OPTIONS will be used to mount the base scratch fs,
+TEST_FS_MOUNT_OPTS will be used to mount the base test fs and
+OVERLAY_MOUNT_OPTIONS will be used to mount both test and scratch overlays.
@@ -363,24 +363,80 @@ _overlay_mount()
$SELINUX_MOUNT_OPTIONS $* $dir $mnt
}
+_overlay_base_test_mount()
+{
+ if [ -z "$OVL_BASE_TEST_DEV" -o -z "$OVL_BASE_TEST_DIR" ] || \
+ _check_mounted_on OVL_BASE_TEST_DEV $OVL_BASE_TEST_DEV \
+ OVL_BASE_TEST_DIR $OVL_BASE_TEST_DIR
+ then
+ # no base fs or already mounted
+ return 0
+ elif [ $? -ne 1 ]
+ then
+ # base fs mounted but not on mount point
+ return 1
+ fi
+
+ _mount $TEST_FS_MOUNT_OPTS \
+ $SELINUX_MOUNT_OPTIONS \
+ $OVL_BASE_TEST_DEV $OVL_BASE_TEST_DIR
+}
+
_overlay_test_mount()
{
- _overlay_mount $OVL_BASE_TEST_DIR $TEST_DIR $*
+ _overlay_base_test_mount && \
+ _overlay_mount $OVL_BASE_TEST_DIR $TEST_DIR $*
+}
+
+_overlay_base_scratch_mount()
+{
+ if [ -z "$OVL_BASE_SCRATCH_DEV" -o -z "$OVL_BASE_SCRATCH_MNT" ] || \
+ _check_mounted_on OVL_BASE_SCRATCH_DEV $OVL_BASE_SCRATCH_DEV \
+ OVL_BASE_SCRATCH_MNT $OVL_BASE_SCRATCH_MNT
+ then
+ # no base fs or already mounted
+ return 0
+ elif [ $? -ne 1 ]
+ then
+ # base fs mounted but not on mount point
+ return 1
+ fi
+
+ _mount $OVL_BASE_MOUNT_OPTIONS \
+ $SELINUX_MOUNT_OPTIONS \
+ $OVL_BASE_SCRATCH_DEV $OVL_BASE_SCRATCH_MNT
+}
+
+_overlay_base_scratch_unmount()
+{
+ [ -n "$OVL_BASE_SCRATCH_DEV" -a -n "$OVL_BASE_SCRATCH_MNT" ] || return 0
+
+ $UMOUNT_PROG $OVL_BASE_SCRATCH_MNT
}
_overlay_scratch_mount()
{
- _overlay_mount $OVL_BASE_SCRATCH_MNT $SCRATCH_MNT $*
+ _overlay_base_scratch_mount && \
+ _overlay_mount $OVL_BASE_SCRATCH_MNT $SCRATCH_MNT $*
+}
+
+_overlay_base_test_unmount()
+{
+ [ -n "$OVL_BASE_TEST_DEV" -a -n "$OVL_BASE_TEST_DIR" ] || return 0
+
+ $UMOUNT_PROG $OVL_BASE_TEST_DIR
}
_overlay_test_unmount()
{
$UMOUNT_PROG $TEST_DIR
+ _overlay_base_test_unmount
}
_overlay_scratch_unmount()
{
$UMOUNT_PROG $SCRATCH_MNT
+ _overlay_base_scratch_unmount
}
_scratch_mount()
@@ -687,7 +743,10 @@ _scratch_cleanup_files()
overlay)
# Avoid rm -rf /* if we messed up
[ -n "$OVL_BASE_SCRATCH_MNT" ] || return 1
- rm -rf $OVL_BASE_SCRATCH_MNT/*
+ _overlay_base_scratch_mount || return 1
+ rm -rf $OVL_BASE_SCRATCH_MNT/* || return 1
+ _overlay_mkdirs $OVL_BASE_SCRATCH_MNT
+ # leave base fs mouted so tests can setup lower/upper dir files
;;
*)
[ -n "$SCRATCH_MNT" ] || return 1
@@ -710,7 +769,7 @@ _scratch_mkfs()
# $SCRATCH_MNT to avoid EEXIST caused by the leftover files
# created in previous runs
_scratch_cleanup_files
- return 0
+ return $?
;;
tmpfs)
# do nothing for tmpfs
@@ -89,7 +89,8 @@ rm -rf ${SCRATCH_MNT}/*
# nothing should be listed
ls ${SCRATCH_MNT}/
-_scratch_unmount
+# unmount overlayfs but not base fs
+$UMOUNT_PROG $SCRATCH_MNT
rm -rf $lowerdir
echo "Silence is golden"
@@ -85,7 +85,8 @@ _user_do "chmod g+t ${SCRATCH_MNT}/attr_file2 > /dev/null 2>&1"
_user_do "chmod u-X ${SCRATCH_MNT}/attr_file2 > /dev/null 2>&1"
stat -c %a ${SCRATCH_MNT}/attr_file2
-_scratch_unmount
+# unmount overlayfs but not base fs
+$UMOUNT_PROG $SCRATCH_MNT
# check mode bits of the file that has been copied up, and
# the file that should not have been copied up.
@@ -73,7 +73,8 @@ mkdir -p $lowerdir1/testdir/d
_overlay_mount_dirs $lowerdir1 $lowerdir2 $workdir $SCRATCH_DEV $SCRATCH_MNT
rm -rf $SCRATCH_MNT/testdir
mkdir -p $SCRATCH_MNT/testdir/visibledir
-_scratch_unmount
+# unmount overlayfs but not base fs
+$UMOUNT_PROG $SCRATCH_MNT
# mount overlay again, with lowerdir1 and lowerdir2 as multiple lowerdirs,
# and create a new file in testdir, triggers copyup from lowerdir,
@@ -84,7 +85,7 @@ touch $SCRATCH_MNT/testdir/visiblefile
# umount and mount overlay again, buggy kernel treats the copied-up dir as
# opaque, visibledir is not seen in merged dir.
-_scratch_unmount
+$UMOUNT_PROG $SCRATCH_MNT
_overlay_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir \
$SCRATCH_DEV $SCRATCH_MNT
ls $SCRATCH_MNT/testdir
When TEST/SCRATCH_DEV are configured to the base fs block device, use this information to mount base fs before running tests, unmount it after running tests and cycle on _test_cycle_mount along with the overlay mounts. This helps catching overlayfs bugs related to leaking objects in underlying (base) fs. To preserve expected tests behavior, the semantics are: - _scratch_mkfs mounts the base fs, cleans all files, creates lower/upper dirs and keeps base fs mounted - _scratch_mount mounts base fs (if needed) and mounts overlay - _scratch_unmount unmounts overlay and base fs Tests that use _scratch_unmount to unmount a custom overlay mount and expect to have access to overlay base dir, were fixed to use explicit umount $SCRATCH_MNT instead. The overlay test itself, does not support formatting the base fs, so config options like MKFS_OPTIONS and FSCK_OPTIONS are ignored on 'check -overlay'. The config option MOUNT_OPTIONS is used to mount the base scratch fs. The config option TEST_FS_MOUNT_OPTS is used to mount the base test fs. The config option OVERLAY_MOUNT_OPTIONS is used to mount both test and scratch overlay mounts. Signed-off-by: Amir Goldstein <amir73il@gmail.com> --- README.overlay | 28 +++++++++++++++++++++++ common/rc | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++---- tests/overlay/003 | 3 ++- tests/overlay/004 | 3 ++- tests/overlay/014 | 5 +++-- 5 files changed, 98 insertions(+), 8 deletions(-)