new file mode 100755
@@ -0,0 +1,126 @@
+#! /bin/bash
+# FS QA Test No. 811
+#
+# Ensure that fallocate steps around reflinked ranges:
+# - Reflink parts of two files together
+# - Fallocate all the other sparse space.
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.* $TESTDIR
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_require_test_reflink
+_supported_os Linux
+
+_require_xfs_io_command "reflink"
+_require_xfs_io_command "falloc"
+_require_cp_reflink
+_require_test
+
+rm -f $seqres.full
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ="$(stat -f $TESTDIR -c '%S')"
+$XFS_IO_PROG -f -c "truncate $((BLKSZ * 5))" -c "pwrite -S 0x61 0 $(( (BLKSZ * 5) + 37))" $TESTDIR/file1 >> $seqres.full
+$XFS_IO_PROG -f -c "truncate $((BLKSZ * 5))" -c "reflink $TESTDIR/file1 $BLKSZ $BLKSZ $(( (BLKSZ * 4) + 37))" $TESTDIR/file2 >> $seqres.full
+$XFS_IO_PROG -f -c "truncate $((BLKSZ * 5))" -c "reflink $TESTDIR/file1 0 0 $BLKSZ" $TESTDIR/file3 >> $seqres.full
+$XFS_IO_PROG -f -c "truncate $((BLKSZ * 5))" -c "reflink $TESTDIR/file1 $BLKSZ $BLKSZ $BLKSZ" $TESTDIR/file4 >> $seqres.full
+$XFS_IO_PROG -f -c "truncate $((BLKSZ * 5))" -c "reflink $TESTDIR/file1 $((BLKSZ * 3)) $((BLKSZ * 3)) $BLKSZ" $TESTDIR/file4 >> $seqres.full
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file5
+_test_remount
+
+echo "Compare sections"
+c0=$(_md5_range_checksum $TESTDIR/file1 $BLKSZ $(( BLKSZ * 4 + 37 )))
+c1=$(_md5_range_checksum $TESTDIR/file2 $BLKSZ $(( BLKSZ * 4 + 37 )))
+test $c0 = $c1 || echo "shared parts of files 1-2 changed"
+
+c0=$(_md5_range_checksum $TESTDIR/file1 0 $BLKSZ)
+c1=$(_md5_range_checksum $TESTDIR/file3 0 $BLKSZ)
+test $c0 = $c1 || echo "shared parts of files 1-3 changed"
+
+c0=$(_md5_range_checksum $TESTDIR/file1 $BLKSZ $BLKSZ)
+c1=$(_md5_range_checksum $TESTDIR/file4 $BLKSZ $BLKSZ)
+test $c0 = $c1 || echo "shared parts of files 1-4 changed"
+
+c0=$(_md5_range_checksum $TESTDIR/file1 0 $((BLKSZ * 5 + 37)))
+c1=$(_md5_range_checksum $TESTDIR/file5 0 $((BLKSZ * 5 + 37)))
+test $c0 = $c1 || echo "shared parts of files 1-5 changed"
+
+echo "Compare files"
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+C5="$(_md5_checksum $TESTDIR/file5)"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C1}" = "${C5}" || echo "file1 and file5 should match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C2}" != "${C5}" || echo "file2 and file5 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+test "${C3}" != "${C5}" || echo "file3 and file5 should not match"
+test "${C4}" != "${C5}" || echo "file4 and file5 should not match"
+
+echo "falloc everything"
+$XFS_IO_PROG -f -c "falloc 0 $((BLKSZ * 5))" $TESTDIR/file2
+$XFS_IO_PROG -f -c "falloc 0 $((BLKSZ * 5))" $TESTDIR/file3
+$XFS_IO_PROG -f -c "falloc 0 $((BLKSZ * 5))" $TESTDIR/file4
+_test_remount
+
+echo "Compare files"
+D1="$(_md5_checksum $TESTDIR/file1)"
+D2="$(_md5_checksum $TESTDIR/file2)"
+D3="$(_md5_checksum $TESTDIR/file3)"
+D4="$(_md5_checksum $TESTDIR/file4)"
+D5="$(_md5_checksum $TESTDIR/file5)"
+
+test "${C1}" = "${D1}" || echo "file1 should not change"
+test "${C2}" = "${D2}" || echo "file2 should not change"
+test "${C3}" = "${D3}" || echo "file3 should not change"
+test "${C4}" = "${D4}" || echo "file4 should not change"
+test "${C5}" = "${D5}" || echo "file2 should not change"
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,6 @@
+QA output created by 811
+Create the original files
+Compare sections
+Compare files
+falloc everything
+Compare files
new file mode 100755
@@ -0,0 +1,116 @@
+#! /bin/bash
+# FS QA Test No. 812
+#
+# Ensure that collapse range steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Collapse the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.* $TESTDIR
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_require_test_reflink
+_supported_os Linux
+
+_require_xfs_io_command "fcollapse"
+_require_cp_reflink
+_require_test
+
+rm -f $seqres.full
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ="$(stat -f $TESTDIR -c '%S')"
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" $TESTDIR/file1 >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x62 $BLKSZ $BLKSZ" $TESTDIR/file1 >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x63 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file1 >> $seqres.full
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file2
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file3
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file4
+$XFS_IO_PROG -f -c "falloc 0 $((BLKSZ * 4))" $TESTDIR/file1
+$XFS_IO_PROG -f -c "falloc 0 $((BLKSZ * 4))" $TESTDIR/file2
+$XFS_IO_PROG -f -c "falloc 0 $((BLKSZ * 4))" $TESTDIR/file3
+$XFS_IO_PROG -f -c "falloc 0 $((BLKSZ * 4))" $TESTDIR/file4
+
+$XFS_IO_PROG -f -c "pwrite -S 0x62 0 $BLKSZ" -c "pwrite -S 0x63 $BLKSZ $BLKSZ" -c "pwrite -S 0x00 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file2.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" -c "pwrite -S 0x63 $BLKSZ $BLKSZ" -c "pwrite -S 0x00 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file3.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" -c "pwrite -S 0x62 $BLKSZ $BLKSZ" -c "pwrite -S 0x00 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file4.chk >> $seqres.full
+_test_remount
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "fcollapse files"
+$XFS_IO_PROG -f -c "fcollapse 0 $BLKSZ" $TESTDIR/file2
+$XFS_IO_PROG -f -c "fcollapse $BLKSZ $BLKSZ" $TESTDIR/file3
+$XFS_IO_PROG -f -c "fcollapse $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file4
+_test_remount
+
+echo "Compare files"
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s $TESTDIR/file2 $TESTDIR/file2.chk || echo "file2 and file2.chk do not match"
+cmp -s $TESTDIR/file3 $TESTDIR/file3.chk || echo "file3 and file3.chk do not match"
+cmp -s $TESTDIR/file4 $TESTDIR/file4.chk || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,5 @@
+QA output created by 812
+Create the original files
+fcollapse files
+Compare files
+Compare against check files
new file mode 100755
@@ -0,0 +1,112 @@
+#! /bin/bash
+# FS QA Test No. 813
+#
+# Ensure that punch-hole steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Punch the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.* $TESTDIR
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_require_test_reflink
+_supported_os Linux
+
+_require_xfs_io_command "fpunch"
+_require_cp_reflink
+_require_test
+
+rm -f $seqres.full
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ="$(stat -f $TESTDIR -c '%S')"
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" $TESTDIR/file1 >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x62 $BLKSZ $BLKSZ" $TESTDIR/file1 >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x63 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file1 >> $seqres.full
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file2
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file3
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file4
+
+$XFS_IO_PROG -f -c "pwrite -S 0x00 0 $BLKSZ" -c "pwrite -S 0x62 $BLKSZ $BLKSZ" -c "pwrite -S 0x63 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file2.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" -c "pwrite -S 0x00 $BLKSZ $BLKSZ" -c "pwrite -S 0x63 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file3.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" -c "pwrite -S 0x62 $BLKSZ $BLKSZ" -c "pwrite -S 0x00 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file4.chk >> $seqres.full
+_test_remount
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "fpunch files"
+$XFS_IO_PROG -f -c "fpunch 0 $BLKSZ" $TESTDIR/file2
+$XFS_IO_PROG -f -c "fpunch $BLKSZ $BLKSZ" $TESTDIR/file3
+$XFS_IO_PROG -f -c "fpunch $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file4
+_test_remount
+
+echo "Compare files"
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s $TESTDIR/file2 $TESTDIR/file2.chk || echo "file2 and file2.chk do not match"
+cmp -s $TESTDIR/file3 $TESTDIR/file3.chk || echo "file3 and file3.chk do not match"
+cmp -s $TESTDIR/file4 $TESTDIR/file4.chk || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,5 @@
+QA output created by 813
+Create the original files
+fpunch files
+Compare files
+Compare against check files
new file mode 100755
@@ -0,0 +1,112 @@
+#! /bin/bash
+# FS QA Test No. 814
+#
+# Ensure that insert range steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Insert into the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.* $TESTDIR
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_require_test_reflink
+_supported_os Linux
+
+_require_xfs_io_command "finsert"
+_require_cp_reflink
+_require_test
+
+rm -f $seqres.full
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ="$(stat -f $TESTDIR -c '%S')"
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" $TESTDIR/file1 >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x62 $BLKSZ $BLKSZ" $TESTDIR/file1 >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x63 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file1 >> $seqres.full
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file2
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file3
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file4
+
+$XFS_IO_PROG -f -c "pwrite -S 0x00 0 $BLKSZ" -c "pwrite -S 0x61 $BLKSZ $BLKSZ" -c "pwrite -S 0x62 $((BLKSZ * 2)) $BLKSZ" -c "pwrite -S 0x63 $((BLKSZ * 3)) $BLKSZ" $TESTDIR/file2.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" -c "pwrite -S 0x00 $BLKSZ $BLKSZ" -c "pwrite -S 0x62 $((BLKSZ * 2)) $BLKSZ" -c "pwrite -S 0x63 $((BLKSZ * 3)) $BLKSZ" $TESTDIR/file3.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" -c "pwrite -S 0x62 $BLKSZ $BLKSZ" -c "pwrite -S 0x00 $((BLKSZ * 2)) $BLKSZ" -c "pwrite -S 0x63 $((BLKSZ * 3)) $BLKSZ" $TESTDIR/file4.chk >> $seqres.full
+_test_remount
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "finsert files"
+$XFS_IO_PROG -f -c "finsert 0 $BLKSZ" $TESTDIR/file2
+$XFS_IO_PROG -f -c "finsert $BLKSZ $BLKSZ" $TESTDIR/file3
+$XFS_IO_PROG -f -c "finsert $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file4
+_test_remount
+
+echo "Compare files"
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s $TESTDIR/file2 $TESTDIR/file2.chk || echo "file2 and file2.chk do not match"
+cmp -s $TESTDIR/file3 $TESTDIR/file3.chk || echo "file3 and file3.chk do not match"
+cmp -s $TESTDIR/file4 $TESTDIR/file4.chk || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,5 @@
+QA output created by 814
+Create the original files
+finsert files
+Compare files
+Compare against check files
new file mode 100755
@@ -0,0 +1,103 @@
+#! /bin/bash
+# FS QA Test No. 815
+#
+# Ensure that truncating the last block in a reflinked file CoWs appropriately:
+# - Create a file that doesn't end on a block boundary
+# - Create two reflink clones of the file
+# - Shorten one of the clones with truncate
+# - Lengthen the other clone with truncate
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.* $TESTDIR
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_require_test_reflink
+_supported_os Linux
+
+_require_xfs_io_command "truncate"
+_require_cp_reflink
+_require_test
+
+rm -f $seqres.full
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ="$(stat -f $TESTDIR -c '%S')"
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" $TESTDIR/file1 >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x62 $BLKSZ 37" $TESTDIR/file1 >> $seqres.full
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file2
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file3
+
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" $TESTDIR/file2.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x62 $BLKSZ 34" $TESTDIR/file2.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" $TESTDIR/file3.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x62 $BLKSZ 37" $TESTDIR/file3.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x00 $((BLKSZ + 37)) 3" $TESTDIR/file3.chk >> $seqres.full
+_test_remount
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+
+echo "truncate files"
+$XFS_IO_PROG -f -c "truncate $((BLKSZ + 34))" $TESTDIR/file2
+$XFS_IO_PROG -f -c "truncate $((BLKSZ + 40))" $TESTDIR/file3
+_test_remount
+
+echo "Compare files"
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+
+echo "Compare against check files"
+cmp -s $TESTDIR/file2 $TESTDIR/file2.chk || echo "file2 and file2.chk do not match"
+cmp -s $TESTDIR/file3 $TESTDIR/file3.chk || echo "file3 and file3.chk do not match"
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,5 @@
+QA output created by 815
+Create the original files
+truncate files
+Compare files
+Compare against check files
new file mode 100755
@@ -0,0 +1,112 @@
+#! /bin/bash
+# FS QA Test No. 816
+#
+# Ensure that zero-range steps around reflinked ranges:
+# - Create three reflink clones of a file
+# - Zero-range the start, middle, and end of the reflink range of each
+# of the three files, respectively
+# - Check that the reflinked areas are still there.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2015, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.* $TESTDIR
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_require_test_reflink
+_supported_os Linux
+
+_require_xfs_io_command "fzero"
+_require_cp_reflink
+_require_test
+
+rm -f $seqres.full
+
+TESTDIR=$TEST_DIR/test-$seq
+rm -rf $TESTDIR
+mkdir $TESTDIR
+
+echo "Create the original files"
+BLKSZ="$(stat -f $TESTDIR -c '%S')"
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" $TESTDIR/file1 >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x62 $BLKSZ $BLKSZ" $TESTDIR/file1 >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x63 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file1 >> $seqres.full
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file2
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file3
+cp --reflink=always $TESTDIR/file1 $TESTDIR/file4
+
+$XFS_IO_PROG -f -c "pwrite -S 0x00 0 $BLKSZ" -c "pwrite -S 0x62 $BLKSZ $BLKSZ" -c "pwrite -S 0x63 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file2.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" -c "pwrite -S 0x00 $BLKSZ $BLKSZ" -c "pwrite -S 0x63 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file3.chk >> $seqres.full
+$XFS_IO_PROG -f -c "pwrite -S 0x61 0 $BLKSZ" -c "pwrite -S 0x62 $BLKSZ $BLKSZ" -c "pwrite -S 0x00 $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file4.chk >> $seqres.full
+_test_remount
+
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" = "${C2}" || echo "file1 and file2 should match"
+test "${C1}" = "${C3}" || echo "file1 and file3 should match"
+test "${C1}" = "${C4}" || echo "file1 and file4 should match"
+test "${C2}" = "${C3}" || echo "file2 and file3 should match"
+test "${C2}" = "${C4}" || echo "file2 and file4 should match"
+test "${C3}" = "${C4}" || echo "file3 and file4 should match"
+
+echo "fzero files"
+$XFS_IO_PROG -f -c "fzero 0 $BLKSZ" $TESTDIR/file2
+$XFS_IO_PROG -f -c "fzero $BLKSZ $BLKSZ" $TESTDIR/file3
+$XFS_IO_PROG -f -c "fzero $((BLKSZ * 2)) $BLKSZ" $TESTDIR/file4
+_test_remount
+
+echo "Compare files"
+C1="$(_md5_checksum $TESTDIR/file1)"
+C2="$(_md5_checksum $TESTDIR/file2)"
+C3="$(_md5_checksum $TESTDIR/file3)"
+C4="$(_md5_checksum $TESTDIR/file4)"
+
+test "${C1}" != "${C2}" || echo "file1 and file2 should not match"
+test "${C1}" != "${C3}" || echo "file1 and file3 should not match"
+test "${C1}" != "${C4}" || echo "file1 and file4 should not match"
+test "${C2}" != "${C3}" || echo "file2 and file3 should not match"
+test "${C2}" != "${C4}" || echo "file2 and file4 should not match"
+test "${C3}" != "${C4}" || echo "file3 and file4 should not match"
+
+echo "Compare against check files"
+cmp -s $TESTDIR/file2 $TESTDIR/file2.chk || echo "file2 and file2.chk do not match"
+cmp -s $TESTDIR/file3 $TESTDIR/file3.chk || echo "file3 and file3.chk do not match"
+cmp -s $TESTDIR/file4 $TESTDIR/file4.chk || echo "file4 and file4.chk do not match"
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,5 @@
+QA output created by 816
+Create the original files
+fzero files
+Compare files
+Compare against check files
@@ -218,6 +218,12 @@
808 auto quick clone
809 auto quick clone
810 auto quick clone
+811 auto quick clone
+812 auto quick clone
+813 auto quick clone
+814 auto quick clone
+815 auto quick clone
+816 auto quick clone
817 auto quick clone
818 auto quick clone
819 auto quick clone
Check that the variants of fallocate (allocate, punch, zero range, collapse range, insert range) do the right thing when they're run against a range of reflinked blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- tests/generic/811 | 126 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/811.out | 6 ++ tests/generic/812 | 116 +++++++++++++++++++++++++++++++++++++++++++++ tests/generic/812.out | 5 ++ tests/generic/813 | 112 ++++++++++++++++++++++++++++++++++++++++++++ tests/generic/813.out | 5 ++ tests/generic/814 | 112 ++++++++++++++++++++++++++++++++++++++++++++ tests/generic/814.out | 5 ++ tests/generic/815 | 103 ++++++++++++++++++++++++++++++++++++++++ tests/generic/815.out | 5 ++ tests/generic/816 | 112 ++++++++++++++++++++++++++++++++++++++++++++ tests/generic/816.out | 5 ++ tests/generic/group | 6 ++ 13 files changed, 718 insertions(+) create mode 100755 tests/generic/811 create mode 100644 tests/generic/811.out create mode 100755 tests/generic/812 create mode 100644 tests/generic/812.out create mode 100755 tests/generic/813 create mode 100644 tests/generic/813.out create mode 100755 tests/generic/814 create mode 100644 tests/generic/814.out create mode 100755 tests/generic/815 create mode 100644 tests/generic/815.out create mode 100755 tests/generic/816 create mode 100644 tests/generic/816.out -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html