@@ -82,6 +82,27 @@ _md5_checksum()
md5sum $1 | cut -d ' ' -f1
}
+# Write a byte into a range of a file
+_pwrite_byte() {
+ pattern="$1"
+ offset="$2"
+ len="$3"
+ file="$4"
+ xfs_io_args="$5"
+
+ "$XFS_IO_PROG" $xfs_io_args -f -c "pwrite -S $pattern $offset $len" "$file"
+}
+
+# mmap-write a byte into a range of a file
+_mwrite_byte() {
+ pattern="$1"
+ offset="$2"
+ len="$3"
+ mmap_len="$4"
+ file="$5"
+
+ "$XFS_IO_PROG" -f -c "mmap -rw 0 $mmap_len" -c "mwrite -S $pattern $offset $len" "$file"
+}
# ls -l w/ selinux sometimes puts a dot at the end:
# -rwxrw-r--. id1 id2 file1
@@ -2569,12 +2590,6 @@ _require_ugid_map()
fi
}
-_require_cp_reflink()
-{
- cp --help | grep -q reflink || \
- _notrun "This test requires a cp with --reflink support."
-}
-
_require_fssum()
{
FSSUM_PROG=$here/src/fssum
@@ -2588,21 +2603,6 @@ _require_cloner()
_notrun "cloner binary not present at $CLONER_PROG"
}
-# Given 2 files, verify that they have the same mapping but different
-# inodes - i.e. an undisturbed reflink
-# Silent if so, make noise if not
-_verify_reflink()
-{
- # not a hard link or symlink?
- cmp -s <(stat -c '%i' $1) <(stat -c '%i' $2) \
- && echo "$1 and $2 are not reflinks: same inode number"
-
- # same mapping?
- diff -u <($XFS_IO_PROG -c "fiemap" $1 | grep -v $1) \
- <($XFS_IO_PROG -c "fiemap" $2 | grep -v $2) \
- || echo "$1 and $2 are not reflinks: different extents"
-}
-
_require_atime()
{
if [ "$FSTYP" == "nfs" ]; then
@@ -2764,6 +2764,15 @@ _require_btrfs_dev_del_by_devid()
"(must support 'btrfs device delete <devid> /<mnt>')"
}
+_require_test_lsattr()
+{
+ testio=$(lsattr -d $TEST_DIR 2>&1)
+ echo $testio | grep -q "Operation not supported" && \
+ _notrun "lsattr not supported by test filesystem type: $FSTYP"
+ echo $testio | grep -q "Inappropriate ioctl for device" && \
+ _notrun "lsattr not supported by test filesystem type: $FSTYP"
+}
+
_get_total_inode()
{
if [ -z "$1" ]; then
new file mode 100644
@@ -0,0 +1,185 @@
+##/bin/bash
+# Routines for reflinking, deduping, and comparing parts of files.
+#-----------------------------------------------------------------------
+# Copyright (c) 2015 Oracle. All Rights Reserved.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+#
+# Contact information: Oracle Corporation, 500 Oracle Parkway,
+# Redwood Shores, CA 94065, USA, or: http://www.oracle.com/
+#-----------------------------------------------------------------------
+
+# Check that cp has a reflink argument
+_require_cp_reflink()
+{
+ cp --help | grep -q reflink || \
+ _notrun "This test requires a cp with --reflink support."
+}
+
+# Given 2 files, verify that they have the same mapping but different
+# inodes - i.e. an undisturbed reflink
+# Silent if so, make noise if not
+_verify_reflink()
+{
+ # not a hard link or symlink?
+ cmp -s <(stat -c '%i' $1) <(stat -c '%i' $2) \
+ && echo "$1 and $2 are not reflinks: same inode number"
+
+ # same mapping?
+ diff -u <($XFS_IO_PROG -c "fiemap" $1 | grep -v $1) \
+ <($XFS_IO_PROG -c "fiemap" $2 | grep -v $2) \
+ || echo "$1 and $2 are not reflinks: different extents"
+}
+
+# New reflink/dedupe helpers
+
+# this test requires the test fs support reflink...
+_require_test_reflink()
+{
+ _require_test
+ _require_xfs_io_command "reflink"
+
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "reflink $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" > /dev/null
+ if [ ! -s "$TEST_DIR/file2" ]; then
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+ _notrun "Reflink not supported by test filesystem type: $FSTYP"
+ fi
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+}
+
+# this test requires the scratch fs support reflink...
+_require_scratch_reflink()
+{
+ _require_scratch
+ _require_xfs_io_command "reflink"
+
+ _scratch_mkfs > /dev/null
+ _scratch_mount
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "reflink $SCRATCH_MNT/file1 0 0 65536" "$SCRATCH_MNT/file2" > /dev/null
+ if [ ! -s "$SCRATCH_MNT/file2" ]; then
+ _scratch_unmount
+ _notrun "Reflink not supported by scratch filesystem type: $FSTYP"
+ fi
+ _scratch_unmount
+}
+
+# this test requires the test fs support dedupe...
+_require_test_dedupe()
+{
+ _require_test
+ _require_xfs_io_command "dedupe"
+
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file2" > /dev/null
+ testio="$("$XFS_IO_PROG" -f -c "dedupe $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" 2>&1)"
+ echo $testio | grep -q "Operation not supported" && \
+ _notrun "Dedupe not supported by test filesystem type: $FSTYP"
+ echo $testio | grep -q "Inappropriate ioctl for device" && \
+ _notrun "Dedupe not supported by test filesystem type: $FSTYP"
+ rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
+}
+
+# this test requires the scratch fs support dedupe...
+_require_scratch_dedupe()
+{
+ _require_scratch
+ _require_xfs_io_command "dedupe"
+
+ _scratch_mkfs > /dev/null
+ _scratch_mount
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file1" > /dev/null
+ "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file2" > /dev/null
+ testio="$("$XFS_IO_PROG" -f -c "dedupe $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" 2>&1)"
+ echo $testio | grep -q "Operation not supported" && \
+ _notrun "Dedupe not supported by test filesystem type: $FSTYP"
+ echo $testio | grep -q "Inappropriate ioctl for device" && \
+ _notrun "Dedupe not supported by test filesystem type: $FSTYP"
+ _scratch_unmount
+}
+
+# Prints a range of a file as a hex dump
+_read_range() {
+ file="$1"
+ offset="$2"
+ len="$3"
+ xfs_io_args="$4"
+
+ $XFS_IO_PROG $xfs_io_args -f -c "pread -q -v $offset $len" "$file" | cut -d ' ' -f '3-18'
+}
+
+# Compare ranges of two files
+_compare_range() {
+ file1="$1"
+ offset1="$2"
+ file2="$3"
+ offset2="$4"
+ len="$5"
+
+ cmp -s <(_read_range "$file1" "$offset1" "$len") \
+ <(_read_range "$file2" "$offset2" "$len")
+}
+
+# Prints the md5 checksum of a hexdump of a part of a given file
+_md5_range_checksum() {
+ file="$1"
+ offset="$2"
+ len="$3"
+
+ md5sum <(_read_range "$file" "$offset" "$len") | cut -d ' ' -f 1
+}
+
+# Reflink some file1 into file2 via cp
+_cp_reflink() {
+ file1="$1"
+ file2="$2"
+
+ cp --reflink=always "$file1" "$file2"
+}
+
+# Reflink some file1 into file2
+_reflink() {
+ file1="$1"
+ file2="$2"
+
+ "$XFS_IO_PROG" -f -c "reflink $file1" "$file2"
+}
+
+# Reflink some part of file1 into another part of file2
+_reflink_range() {
+ file1="$1"
+ offset1="$2"
+ file2="$3"
+ offset2="$4"
+ len="$5"
+ xfs_io_args="$6"
+
+ "$XFS_IO_PROG" $xfs_io_args -f -c "reflink $file1 $offset1 $offset2 $len" "$file2"
+}
+
+# Dedupe some part of file1 into another part of file2
+_dedupe_range() {
+ file1="$1"
+ offset1="$2"
+ file2="$3"
+ offset2="$4"
+ len="$5"
+ xfs_io_args="$6"
+
+ "$XFS_IO_PROG" $xfs_io_args -f -c "dedupe $file1 $offset1 $offset2 $len" "$file2"
+}
@@ -47,6 +47,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
@@ -48,6 +48,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
@@ -41,6 +41,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
@@ -41,6 +41,7 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
_supported_fs btrfs
@@ -43,9 +43,10 @@ _cleanup()
# get standard environment, filters and checks
. common/rc
. common/filter
+. common/reflink
# real QA test starts here
-_supported_fs btrfs
+_require_test_reflink
_supported_os Linux
_require_xfs_io_command "fiemap"
@@ -43,9 +43,10 @@ _cleanup()
# get standard environment, filters and checks
. common/rc
. common/filter
+. common/reflink
# real QA test starts here
-_supported_fs btrfs
+_require_test_reflink
_supported_os Linux
_require_xfs_io_command "fiemap"
@@ -41,9 +41,10 @@ _cleanup()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/reflink
# real QA test starts here
-_supported_fs btrfs
+_require_test_reflink
_supported_os Linux
_require_xfs_io_command "fiemap"
Put all the reflink/dedupe-related test support routines in a separate file, then modify the existing reflink tests to use them. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- common/rc | 51 +++++++++------ common/reflink | 185 +++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/029 | 1 tests/btrfs/031 | 1 tests/btrfs/108 | 1 tests/btrfs/109 | 1 tests/generic/110 | 3 + tests/generic/111 | 3 + tests/generic/115 | 3 + 9 files changed, 225 insertions(+), 24 deletions(-) create mode 100644 common/reflink -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html