| Message ID | 20220201170952.22443-2-catherine.hoang@oracle.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | xfstests: add log attribute replay test | expand |
On Tue, Feb 01, 2022 at 05:09:52PM +0000, Catherine Hoang wrote: > From: Allison Henderson <allison.henderson@oracle.com> > > This patch adds tests to exercise the log attribute error > inject and log replay. These tests aim to cover cases where attributes > are added, removed, and overwritten in each format (shortform, leaf, > node). Error inject is used to replay these operations from the log. > > Signed-off-by: Allison Henderson <allison.henderson@oracle.com> > Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> > --- > tests/xfs/543 | 171 ++++++++++++++++++++++++++++++++++++++++++++++ > tests/xfs/543.out | 149 ++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 320 insertions(+) > create mode 100755 tests/xfs/543 > create mode 100644 tests/xfs/543.out > > diff --git a/tests/xfs/543 b/tests/xfs/543 > new file mode 100755 > index 00000000..ae955660 > --- /dev/null > +++ b/tests/xfs/543 > @@ -0,0 +1,171 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2022, Oracle and/or its affiliates. All Rights Reserved. > +# > +# FS QA Test 543 > +# > +# Log attribute replay test > +# > +. ./common/preamble > +_begin_fstest auto quick attr > + > +# get standard environment, filters and checks > +. ./common/filter > +. ./common/attr > +. ./common/inject > + > +_cleanup() > +{ > + rm -f $tmp.* > + echo 0 > /sys/fs/xfs/debug/larp Cleanup functions can run even if the _require functions decide to _notrun the test, so I think this ought to be: test -w /sys/fs/xfs/debug/larp && \ echo 0 > /sys/fs/xfs/debug/larp > +} > + > +test_attr_replay() > +{ > + testfile=$SCRATCH_MNT/$1 > + attr_name=$2 > + attr_value=$3 > + flag=$4 > + error_tag=$5 > + > + # Inject error > + _scratch_inject_error $error_tag > + > + # Set attribute > + echo "$attr_value" | ${ATTR_PROG} -$flag "$attr_name" $testfile 2>&1 | \ > + _filter_scratch > + > + # FS should be shut down, touch will fail > + touch $testfile 2>&1 | _filter_scratch > + > + # Remount to replay log > + _scratch_remount_dump_log >> $seqres.full > + > + # FS should be online, touch should succeed > + touch $testfile > + > + # Verify attr recovery > + { $ATTR_PROG -g $attr_name $testfile | md5sum; } 2>&1 | _filter_scratch > + > + echo "" > +} > + > +create_test_file() > +{ > + filename=$SCRATCH_MNT/$1 > + count=$2 > + attr_value=$3 > + > + touch $filename > + > + for i in `seq $count` > + do > + $ATTR_PROG -s "attr_name$i" -V $attr_value $filename >> \ > + $seqres.full > + done > +} > + > +# real QA test starts here > +_supported_fs xfs > + > +_require_scratch > +_require_attrs > +_require_xfs_io_error_injection "larp" > +_require_xfs_io_error_injection "da_leaf_split" > +_require_xfs_io_error_injection "larp_leaf_to_node" > +_require_xfs_sysfs debug/larp This only tests that the sysfs control file exists, not that it's writable. Granted, debug knobs are writable by default, but we should be careful here and: test -w /sys/fs/xfs/debug/larp || _notrun "larp knob not writable" So this test won't fail if (say) someone has chmod a-w the debug knob since the module loaded. With that fixed, I think this test will be ready to go the next time around. --D > + > +# turn on log attributes > +echo 1 > /sys/fs/xfs/debug/larp > + > +attr16="0123456789ABCDEF" > +attr64="$attr16$attr16$attr16$attr16" > +attr256="$attr64$attr64$attr64$attr64" > +attr1k="$attr256$attr256$attr256$attr256" > +attr4k="$attr1k$attr1k$attr1k$attr1k" > +attr8k="$attr4k$attr4k" > +attr16k="$attr8k$attr8k" > +attr32k="$attr16k$attr16k" > +attr64k="$attr32k$attr32k" > + > +echo "*** mkfs" > +_scratch_mkfs >/dev/null > + > +echo "*** mount FS" > +_scratch_mount > + > +# empty, inline > +create_test_file empty_file1 0 > +test_attr_replay empty_file1 "attr_name" $attr64 "s" "larp" > +test_attr_replay empty_file1 "attr_name" $attr64 "r" "larp" > + > +# empty, internal > +create_test_file empty_file2 0 > +test_attr_replay empty_file2 "attr_name" $attr1k "s" "larp" > +test_attr_replay empty_file2 "attr_name" $attr1k "r" "larp" > + > +# empty, remote > +create_test_file empty_file3 0 > +test_attr_replay empty_file3 "attr_name" $attr64k "s" "larp" > +test_attr_replay empty_file3 "attr_name" $attr64k "r" "larp" > + > +# inline, inline > +create_test_file inline_file1 1 $attr16 > +test_attr_replay inline_file1 "attr_name2" $attr64 "s" "larp" > +test_attr_replay inline_file1 "attr_name2" $attr64 "r" "larp" > + > +# inline, internal > +create_test_file inline_file2 1 $attr16 > +test_attr_replay inline_file2 "attr_name2" $attr1k "s" "larp" > +test_attr_replay inline_file2 "attr_name2" $attr1k "r" "larp" > + > +# inline, remote > +create_test_file inline_file3 1 $attr16 > +test_attr_replay inline_file3 "attr_name2" $attr64k "s" "larp" > +test_attr_replay inline_file3 "attr_name2" $attr64k "r" "larp" > + > +# extent, internal > +create_test_file extent_file1 1 $attr1k > +test_attr_replay extent_file1 "attr_name2" $attr1k "s" "larp" > +test_attr_replay extent_file1 "attr_name2" $attr1k "r" "larp" > + > +# extent, inject error on split > +create_test_file extent_file2 3 $attr1k > +test_attr_replay extent_file2 "attr_name4" $attr1k "s" "da_leaf_split" > + > +# extent, inject error on fork transition > +create_test_file extent_file3 3 $attr1k > +test_attr_replay extent_file3 "attr_name4" $attr1k "s" "larp_leaf_to_node" > + > +# extent, remote > +create_test_file extent_file4 1 $attr1k > +test_attr_replay extent_file4 "attr_name2" $attr64k "s" "larp" > +test_attr_replay extent_file4 "attr_name2" $attr64k "r" "larp" > + > +# remote, internal > +create_test_file remote_file1 1 $attr64k > +test_attr_replay remote_file1 "attr_name2" $attr1k "s" "larp" > +test_attr_replay remote_file1 "attr_name2" $attr1k "r" "larp" > + > +# remote, remote > +create_test_file remote_file2 1 $attr64k > +test_attr_replay remote_file2 "attr_name2" $attr64k "s" "larp" > +test_attr_replay remote_file2 "attr_name2" $attr64k "r" "larp" > + > +# replace shortform > +create_test_file sf_file 2 $attr64 > +test_attr_replay sf_file "attr_name2" $attr64 "s" "larp" > + > +# replace leaf > +create_test_file leaf_file 2 $attr1k > +test_attr_replay leaf_file "attr_name2" $attr1k "s" "larp" > + > +# replace node > +create_test_file node_file 1 $attr64k > +$ATTR_PROG -s "attr_name2" -V $attr1k $SCRATCH_MNT/node_file \ > + >> $seqres.full > +test_attr_replay node_file "attr_name2" $attr1k "s" "larp" > + > +echo "*** done" > +status=0 > +exit > diff --git a/tests/xfs/543.out b/tests/xfs/543.out > new file mode 100644 > index 00000000..075eecb3 > --- /dev/null > +++ b/tests/xfs/543.out > @@ -0,0 +1,149 @@ > +QA output created by 543 > +*** mkfs > +*** mount FS > +attr_set: Input/output error > +Could not set "attr_name" for SCRATCH_MNT/empty_file1 > +touch: cannot touch 'SCRATCH_MNT/empty_file1': Input/output error > +db6747306e971b6e3fd474aae10159a1 - > + > +attr_remove: Input/output error > +Could not remove "attr_name" for SCRATCH_MNT/empty_file1 > +touch: cannot touch 'SCRATCH_MNT/empty_file1': Input/output error > +attr_get: No data available > +Could not get "attr_name" for SCRATCH_MNT/empty_file1 > +d41d8cd98f00b204e9800998ecf8427e - > + > +attr_set: Input/output error > +Could not set "attr_name" for SCRATCH_MNT/empty_file2 > +touch: cannot touch 'SCRATCH_MNT/empty_file2': Input/output error > +d489897d7ba99c2815052ae7dca29097 - > + > +attr_remove: Input/output error > +Could not remove "attr_name" for SCRATCH_MNT/empty_file2 > +touch: cannot touch 'SCRATCH_MNT/empty_file2': Input/output error > +attr_get: No data available > +Could not get "attr_name" for SCRATCH_MNT/empty_file2 > +d41d8cd98f00b204e9800998ecf8427e - > + > +attr_set: Input/output error > +Could not set "attr_name" for SCRATCH_MNT/empty_file3 > +touch: cannot touch 'SCRATCH_MNT/empty_file3': Input/output error > +0ba8b18d622a11b5ff89336761380857 - > + > +attr_remove: Input/output error > +Could not remove "attr_name" for SCRATCH_MNT/empty_file3 > +touch: cannot touch 'SCRATCH_MNT/empty_file3': Input/output error > +attr_get: No data available > +Could not get "attr_name" for SCRATCH_MNT/empty_file3 > +d41d8cd98f00b204e9800998ecf8427e - > + > +attr_set: Input/output error > +Could not set "attr_name2" for SCRATCH_MNT/inline_file1 > +touch: cannot touch 'SCRATCH_MNT/inline_file1': Input/output error > +49f4f904e12102a3423d8ab3f845e6e8 - > + > +attr_remove: Input/output error > +Could not remove "attr_name2" for SCRATCH_MNT/inline_file1 > +touch: cannot touch 'SCRATCH_MNT/inline_file1': Input/output error > +attr_get: No data available > +Could not get "attr_name2" for SCRATCH_MNT/inline_file1 > +d41d8cd98f00b204e9800998ecf8427e - > + > +attr_set: Input/output error > +Could not set "attr_name2" for SCRATCH_MNT/inline_file2 > +touch: cannot touch 'SCRATCH_MNT/inline_file2': Input/output error > +6a0bd8b5aaa619bcd51f2ead0208f1bb - > + > +attr_remove: Input/output error > +Could not remove "attr_name2" for SCRATCH_MNT/inline_file2 > +touch: cannot touch 'SCRATCH_MNT/inline_file2': Input/output error > +attr_get: No data available > +Could not get "attr_name2" for SCRATCH_MNT/inline_file2 > +d41d8cd98f00b204e9800998ecf8427e - > + > +attr_set: Input/output error > +Could not set "attr_name2" for SCRATCH_MNT/inline_file3 > +touch: cannot touch 'SCRATCH_MNT/inline_file3': Input/output error > +3276329baa72c32f0a4a5cb0dbf813df - > + > +attr_remove: Input/output error > +Could not remove "attr_name2" for SCRATCH_MNT/inline_file3 > +touch: cannot touch 'SCRATCH_MNT/inline_file3': Input/output error > +attr_get: No data available > +Could not get "attr_name2" for SCRATCH_MNT/inline_file3 > +d41d8cd98f00b204e9800998ecf8427e - > + > +attr_set: Input/output error > +Could not set "attr_name2" for SCRATCH_MNT/extent_file1 > +touch: cannot touch 'SCRATCH_MNT/extent_file1': Input/output error > +8c6a952b2dbecaa5a308a00d2022e599 - > + > +attr_remove: Input/output error > +Could not remove "attr_name2" for SCRATCH_MNT/extent_file1 > +touch: cannot touch 'SCRATCH_MNT/extent_file1': Input/output error > +attr_get: No data available > +Could not get "attr_name2" for SCRATCH_MNT/extent_file1 > +d41d8cd98f00b204e9800998ecf8427e - > + > +attr_set: Input/output error > +Could not set "attr_name4" for SCRATCH_MNT/extent_file2 > +touch: cannot touch 'SCRATCH_MNT/extent_file2': Input/output error > +c5ae4d474e547819a8807cfde66daba2 - > + > +attr_set: Input/output error > +Could not set "attr_name4" for SCRATCH_MNT/extent_file3 > +touch: cannot touch 'SCRATCH_MNT/extent_file3': Input/output error > +17bae95be35ce7a0e6d4327b67da932b - > + > +attr_set: Input/output error > +Could not set "attr_name2" for SCRATCH_MNT/extent_file4 > +touch: cannot touch 'SCRATCH_MNT/extent_file4': Input/output error > +d17d94c39a964409b8b8173a51f8e951 - > + > +attr_remove: Input/output error > +Could not remove "attr_name2" for SCRATCH_MNT/extent_file4 > +touch: cannot touch 'SCRATCH_MNT/extent_file4': Input/output error > +attr_get: No data available > +Could not get "attr_name2" for SCRATCH_MNT/extent_file4 > +d41d8cd98f00b204e9800998ecf8427e - > + > +attr_set: Input/output error > +Could not set "attr_name2" for SCRATCH_MNT/remote_file1 > +touch: cannot touch 'SCRATCH_MNT/remote_file1': Input/output error > +4104e21da013632e636cdd044884ca94 - > + > +attr_remove: Input/output error > +Could not remove "attr_name2" for SCRATCH_MNT/remote_file1 > +touch: cannot touch 'SCRATCH_MNT/remote_file1': Input/output error > +attr_get: No data available > +Could not get "attr_name2" for SCRATCH_MNT/remote_file1 > +d41d8cd98f00b204e9800998ecf8427e - > + > +attr_set: Input/output error > +Could not set "attr_name2" for SCRATCH_MNT/remote_file2 > +touch: cannot touch 'SCRATCH_MNT/remote_file2': Input/output error > +9ac16e37ecd6f6c24de3f724c49199a8 - > + > +attr_remove: Input/output error > +Could not remove "attr_name2" for SCRATCH_MNT/remote_file2 > +touch: cannot touch 'SCRATCH_MNT/remote_file2': Input/output error > +attr_get: No data available > +Could not get "attr_name2" for SCRATCH_MNT/remote_file2 > +d41d8cd98f00b204e9800998ecf8427e - > + > +attr_set: Input/output error > +Could not set "attr_name2" for SCRATCH_MNT/sf_file > +touch: cannot touch 'SCRATCH_MNT/sf_file': Input/output error > +33bc798a506b093a7c2cdea122a738d7 - > + > +attr_set: Input/output error > +Could not set "attr_name2" for SCRATCH_MNT/leaf_file > +touch: cannot touch 'SCRATCH_MNT/leaf_file': Input/output error > +dec146c586813046f4b876bcecbaa713 - > + > +attr_set: Input/output error > +Could not set "attr_name2" for SCRATCH_MNT/node_file > +touch: cannot touch 'SCRATCH_MNT/node_file': Input/output error > +e97ce3d15f9f28607b51f76bf8b7296c - > + > +*** done > -- > 2.25.1 >
> On Feb 1, 2022, at 12:13 PM, Darrick J. Wong <djwong@kernel.org> wrote: > > On Tue, Feb 01, 2022 at 05:09:52PM +0000, Catherine Hoang wrote: >> From: Allison Henderson <allison.henderson@oracle.com> >> >> This patch adds tests to exercise the log attribute error >> inject and log replay. These tests aim to cover cases where attributes >> are added, removed, and overwritten in each format (shortform, leaf, >> node). Error inject is used to replay these operations from the log. >> >> Signed-off-by: Allison Henderson <allison.henderson@oracle.com> >> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> >> --- >> tests/xfs/543 | 171 ++++++++++++++++++++++++++++++++++++++++++++++ >> tests/xfs/543.out | 149 ++++++++++++++++++++++++++++++++++++++++ >> 2 files changed, 320 insertions(+) >> create mode 100755 tests/xfs/543 >> create mode 100644 tests/xfs/543.out >> >> diff --git a/tests/xfs/543 b/tests/xfs/543 >> new file mode 100755 >> index 00000000..ae955660 >> --- /dev/null >> +++ b/tests/xfs/543 >> @@ -0,0 +1,171 @@ >> +#! /bin/bash >> +# SPDX-License-Identifier: GPL-2.0 >> +# Copyright (c) 2022, Oracle and/or its affiliates. All Rights Reserved. >> +# >> +# FS QA Test 543 >> +# >> +# Log attribute replay test >> +# >> +. ./common/preamble >> +_begin_fstest auto quick attr >> + >> +# get standard environment, filters and checks >> +. ./common/filter >> +. ./common/attr >> +. ./common/inject >> + >> +_cleanup() >> +{ >> + rm -f $tmp.* >> + echo 0 > /sys/fs/xfs/debug/larp > > Cleanup functions can run even if the _require functions decide to > _notrun the test, so I think this ought to be: > > test -w /sys/fs/xfs/debug/larp && \ > echo 0 > /sys/fs/xfs/debug/larp Ok, this makes sense >> +} >> + >> +test_attr_replay() >> +{ >> + testfile=$SCRATCH_MNT/$1 >> + attr_name=$2 >> + attr_value=$3 >> + flag=$4 >> + error_tag=$5 >> + >> + # Inject error >> + _scratch_inject_error $error_tag >> + >> + # Set attribute >> + echo "$attr_value" | ${ATTR_PROG} -$flag "$attr_name" $testfile 2>&1 | \ >> + _filter_scratch >> + >> + # FS should be shut down, touch will fail >> + touch $testfile 2>&1 | _filter_scratch >> + >> + # Remount to replay log >> + _scratch_remount_dump_log >> $seqres.full >> + >> + # FS should be online, touch should succeed >> + touch $testfile >> + >> + # Verify attr recovery >> + { $ATTR_PROG -g $attr_name $testfile | md5sum; } 2>&1 | _filter_scratch >> + >> + echo "" >> +} >> + >> +create_test_file() >> +{ >> + filename=$SCRATCH_MNT/$1 >> + count=$2 >> + attr_value=$3 >> + >> + touch $filename >> + >> + for i in `seq $count` >> + do >> + $ATTR_PROG -s "attr_name$i" -V $attr_value $filename >> \ >> + $seqres.full >> + done >> +} >> + >> +# real QA test starts here >> +_supported_fs xfs >> + >> +_require_scratch >> +_require_attrs >> +_require_xfs_io_error_injection "larp" >> +_require_xfs_io_error_injection "da_leaf_split" >> +_require_xfs_io_error_injection "larp_leaf_to_node" >> +_require_xfs_sysfs debug/larp > > This only tests that the sysfs control file exists, not that it's > writable. Granted, debug knobs are writable by default, but we should > be careful here and: > > test -w /sys/fs/xfs/debug/larp || _notrun "larp knob not writable" > > So this test won't fail if (say) someone has chmod a-w the debug knob > since the module loaded. > > With that fixed, I think this test will be ready to go the next time > around. > > --D Ok, will add this on the next one. Thanks for the feedback! > >> + >> +# turn on log attributes >> +echo 1 > /sys/fs/xfs/debug/larp >> + >> +attr16="0123456789ABCDEF" >> +attr64="$attr16$attr16$attr16$attr16" >> +attr256="$attr64$attr64$attr64$attr64" >> +attr1k="$attr256$attr256$attr256$attr256" >> +attr4k="$attr1k$attr1k$attr1k$attr1k" >> +attr8k="$attr4k$attr4k" >> +attr16k="$attr8k$attr8k" >> +attr32k="$attr16k$attr16k" >> +attr64k="$attr32k$attr32k" >> + >> +echo "*** mkfs" >> +_scratch_mkfs >/dev/null >> + >> +echo "*** mount FS" >> +_scratch_mount >> + >> +# empty, inline >> +create_test_file empty_file1 0 >> +test_attr_replay empty_file1 "attr_name" $attr64 "s" "larp" >> +test_attr_replay empty_file1 "attr_name" $attr64 "r" "larp" >> + >> +# empty, internal >> +create_test_file empty_file2 0 >> +test_attr_replay empty_file2 "attr_name" $attr1k "s" "larp" >> +test_attr_replay empty_file2 "attr_name" $attr1k "r" "larp" >> + >> +# empty, remote >> +create_test_file empty_file3 0 >> +test_attr_replay empty_file3 "attr_name" $attr64k "s" "larp" >> +test_attr_replay empty_file3 "attr_name" $attr64k "r" "larp" >> + >> +# inline, inline >> +create_test_file inline_file1 1 $attr16 >> +test_attr_replay inline_file1 "attr_name2" $attr64 "s" "larp" >> +test_attr_replay inline_file1 "attr_name2" $attr64 "r" "larp" >> + >> +# inline, internal >> +create_test_file inline_file2 1 $attr16 >> +test_attr_replay inline_file2 "attr_name2" $attr1k "s" "larp" >> +test_attr_replay inline_file2 "attr_name2" $attr1k "r" "larp" >> + >> +# inline, remote >> +create_test_file inline_file3 1 $attr16 >> +test_attr_replay inline_file3 "attr_name2" $attr64k "s" "larp" >> +test_attr_replay inline_file3 "attr_name2" $attr64k "r" "larp" >> + >> +# extent, internal >> +create_test_file extent_file1 1 $attr1k >> +test_attr_replay extent_file1 "attr_name2" $attr1k "s" "larp" >> +test_attr_replay extent_file1 "attr_name2" $attr1k "r" "larp" >> + >> +# extent, inject error on split >> +create_test_file extent_file2 3 $attr1k >> +test_attr_replay extent_file2 "attr_name4" $attr1k "s" "da_leaf_split" >> + >> +# extent, inject error on fork transition >> +create_test_file extent_file3 3 $attr1k >> +test_attr_replay extent_file3 "attr_name4" $attr1k "s" "larp_leaf_to_node" >> + >> +# extent, remote >> +create_test_file extent_file4 1 $attr1k >> +test_attr_replay extent_file4 "attr_name2" $attr64k "s" "larp" >> +test_attr_replay extent_file4 "attr_name2" $attr64k "r" "larp" >> + >> +# remote, internal >> +create_test_file remote_file1 1 $attr64k >> +test_attr_replay remote_file1 "attr_name2" $attr1k "s" "larp" >> +test_attr_replay remote_file1 "attr_name2" $attr1k "r" "larp" >> + >> +# remote, remote >> +create_test_file remote_file2 1 $attr64k >> +test_attr_replay remote_file2 "attr_name2" $attr64k "s" "larp" >> +test_attr_replay remote_file2 "attr_name2" $attr64k "r" "larp" >> + >> +# replace shortform >> +create_test_file sf_file 2 $attr64 >> +test_attr_replay sf_file "attr_name2" $attr64 "s" "larp" >> + >> +# replace leaf >> +create_test_file leaf_file 2 $attr1k >> +test_attr_replay leaf_file "attr_name2" $attr1k "s" "larp" >> + >> +# replace node >> +create_test_file node_file 1 $attr64k >> +$ATTR_PROG -s "attr_name2" -V $attr1k $SCRATCH_MNT/node_file \ >> + >> $seqres.full >> +test_attr_replay node_file "attr_name2" $attr1k "s" "larp" >> + >> +echo "*** done" >> +status=0 >> +exit >> diff --git a/tests/xfs/543.out b/tests/xfs/543.out >> new file mode 100644 >> index 00000000..075eecb3 >> --- /dev/null >> +++ b/tests/xfs/543.out >> @@ -0,0 +1,149 @@ >> +QA output created by 543 >> +*** mkfs >> +*** mount FS >> +attr_set: Input/output error >> +Could not set "attr_name" for SCRATCH_MNT/empty_file1 >> +touch: cannot touch 'SCRATCH_MNT/empty_file1': Input/output error >> +db6747306e971b6e3fd474aae10159a1 - >> + >> +attr_remove: Input/output error >> +Could not remove "attr_name" for SCRATCH_MNT/empty_file1 >> +touch: cannot touch 'SCRATCH_MNT/empty_file1': Input/output error >> +attr_get: No data available >> +Could not get "attr_name" for SCRATCH_MNT/empty_file1 >> +d41d8cd98f00b204e9800998ecf8427e - >> + >> +attr_set: Input/output error >> +Could not set "attr_name" for SCRATCH_MNT/empty_file2 >> +touch: cannot touch 'SCRATCH_MNT/empty_file2': Input/output error >> +d489897d7ba99c2815052ae7dca29097 - >> + >> +attr_remove: Input/output error >> +Could not remove "attr_name" for SCRATCH_MNT/empty_file2 >> +touch: cannot touch 'SCRATCH_MNT/empty_file2': Input/output error >> +attr_get: No data available >> +Could not get "attr_name" for SCRATCH_MNT/empty_file2 >> +d41d8cd98f00b204e9800998ecf8427e - >> + >> +attr_set: Input/output error >> +Could not set "attr_name" for SCRATCH_MNT/empty_file3 >> +touch: cannot touch 'SCRATCH_MNT/empty_file3': Input/output error >> +0ba8b18d622a11b5ff89336761380857 - >> + >> +attr_remove: Input/output error >> +Could not remove "attr_name" for SCRATCH_MNT/empty_file3 >> +touch: cannot touch 'SCRATCH_MNT/empty_file3': Input/output error >> +attr_get: No data available >> +Could not get "attr_name" for SCRATCH_MNT/empty_file3 >> +d41d8cd98f00b204e9800998ecf8427e - >> + >> +attr_set: Input/output error >> +Could not set "attr_name2" for SCRATCH_MNT/inline_file1 >> +touch: cannot touch 'SCRATCH_MNT/inline_file1': Input/output error >> +49f4f904e12102a3423d8ab3f845e6e8 - >> + >> +attr_remove: Input/output error >> +Could not remove "attr_name2" for SCRATCH_MNT/inline_file1 >> +touch: cannot touch 'SCRATCH_MNT/inline_file1': Input/output error >> +attr_get: No data available >> +Could not get "attr_name2" for SCRATCH_MNT/inline_file1 >> +d41d8cd98f00b204e9800998ecf8427e - >> + >> +attr_set: Input/output error >> +Could not set "attr_name2" for SCRATCH_MNT/inline_file2 >> +touch: cannot touch 'SCRATCH_MNT/inline_file2': Input/output error >> +6a0bd8b5aaa619bcd51f2ead0208f1bb - >> + >> +attr_remove: Input/output error >> +Could not remove "attr_name2" for SCRATCH_MNT/inline_file2 >> +touch: cannot touch 'SCRATCH_MNT/inline_file2': Input/output error >> +attr_get: No data available >> +Could not get "attr_name2" for SCRATCH_MNT/inline_file2 >> +d41d8cd98f00b204e9800998ecf8427e - >> + >> +attr_set: Input/output error >> +Could not set "attr_name2" for SCRATCH_MNT/inline_file3 >> +touch: cannot touch 'SCRATCH_MNT/inline_file3': Input/output error >> +3276329baa72c32f0a4a5cb0dbf813df - >> + >> +attr_remove: Input/output error >> +Could not remove "attr_name2" for SCRATCH_MNT/inline_file3 >> +touch: cannot touch 'SCRATCH_MNT/inline_file3': Input/output error >> +attr_get: No data available >> +Could not get "attr_name2" for SCRATCH_MNT/inline_file3 >> +d41d8cd98f00b204e9800998ecf8427e - >> + >> +attr_set: Input/output error >> +Could not set "attr_name2" for SCRATCH_MNT/extent_file1 >> +touch: cannot touch 'SCRATCH_MNT/extent_file1': Input/output error >> +8c6a952b2dbecaa5a308a00d2022e599 - >> + >> +attr_remove: Input/output error >> +Could not remove "attr_name2" for SCRATCH_MNT/extent_file1 >> +touch: cannot touch 'SCRATCH_MNT/extent_file1': Input/output error >> +attr_get: No data available >> +Could not get "attr_name2" for SCRATCH_MNT/extent_file1 >> +d41d8cd98f00b204e9800998ecf8427e - >> + >> +attr_set: Input/output error >> +Could not set "attr_name4" for SCRATCH_MNT/extent_file2 >> +touch: cannot touch 'SCRATCH_MNT/extent_file2': Input/output error >> +c5ae4d474e547819a8807cfde66daba2 - >> + >> +attr_set: Input/output error >> +Could not set "attr_name4" for SCRATCH_MNT/extent_file3 >> +touch: cannot touch 'SCRATCH_MNT/extent_file3': Input/output error >> +17bae95be35ce7a0e6d4327b67da932b - >> + >> +attr_set: Input/output error >> +Could not set "attr_name2" for SCRATCH_MNT/extent_file4 >> +touch: cannot touch 'SCRATCH_MNT/extent_file4': Input/output error >> +d17d94c39a964409b8b8173a51f8e951 - >> + >> +attr_remove: Input/output error >> +Could not remove "attr_name2" for SCRATCH_MNT/extent_file4 >> +touch: cannot touch 'SCRATCH_MNT/extent_file4': Input/output error >> +attr_get: No data available >> +Could not get "attr_name2" for SCRATCH_MNT/extent_file4 >> +d41d8cd98f00b204e9800998ecf8427e - >> + >> +attr_set: Input/output error >> +Could not set "attr_name2" for SCRATCH_MNT/remote_file1 >> +touch: cannot touch 'SCRATCH_MNT/remote_file1': Input/output error >> +4104e21da013632e636cdd044884ca94 - >> + >> +attr_remove: Input/output error >> +Could not remove "attr_name2" for SCRATCH_MNT/remote_file1 >> +touch: cannot touch 'SCRATCH_MNT/remote_file1': Input/output error >> +attr_get: No data available >> +Could not get "attr_name2" for SCRATCH_MNT/remote_file1 >> +d41d8cd98f00b204e9800998ecf8427e - >> + >> +attr_set: Input/output error >> +Could not set "attr_name2" for SCRATCH_MNT/remote_file2 >> +touch: cannot touch 'SCRATCH_MNT/remote_file2': Input/output error >> +9ac16e37ecd6f6c24de3f724c49199a8 - >> + >> +attr_remove: Input/output error >> +Could not remove "attr_name2" for SCRATCH_MNT/remote_file2 >> +touch: cannot touch 'SCRATCH_MNT/remote_file2': Input/output error >> +attr_get: No data available >> +Could not get "attr_name2" for SCRATCH_MNT/remote_file2 >> +d41d8cd98f00b204e9800998ecf8427e - >> + >> +attr_set: Input/output error >> +Could not set "attr_name2" for SCRATCH_MNT/sf_file >> +touch: cannot touch 'SCRATCH_MNT/sf_file': Input/output error >> +33bc798a506b093a7c2cdea122a738d7 - >> + >> +attr_set: Input/output error >> +Could not set "attr_name2" for SCRATCH_MNT/leaf_file >> +touch: cannot touch 'SCRATCH_MNT/leaf_file': Input/output error >> +dec146c586813046f4b876bcecbaa713 - >> + >> +attr_set: Input/output error >> +Could not set "attr_name2" for SCRATCH_MNT/node_file >> +touch: cannot touch 'SCRATCH_MNT/node_file': Input/output error >> +e97ce3d15f9f28607b51f76bf8b7296c - >> + >> +*** done >> -- >> 2.25.1 >>
diff --git a/tests/xfs/543 b/tests/xfs/543 new file mode 100755 index 00000000..ae955660 --- /dev/null +++ b/tests/xfs/543 @@ -0,0 +1,171 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2022, Oracle and/or its affiliates. All Rights Reserved. +# +# FS QA Test 543 +# +# Log attribute replay test +# +. ./common/preamble +_begin_fstest auto quick attr + +# get standard environment, filters and checks +. ./common/filter +. ./common/attr +. ./common/inject + +_cleanup() +{ + rm -f $tmp.* + echo 0 > /sys/fs/xfs/debug/larp +} + +test_attr_replay() +{ + testfile=$SCRATCH_MNT/$1 + attr_name=$2 + attr_value=$3 + flag=$4 + error_tag=$5 + + # Inject error + _scratch_inject_error $error_tag + + # Set attribute + echo "$attr_value" | ${ATTR_PROG} -$flag "$attr_name" $testfile 2>&1 | \ + _filter_scratch + + # FS should be shut down, touch will fail + touch $testfile 2>&1 | _filter_scratch + + # Remount to replay log + _scratch_remount_dump_log >> $seqres.full + + # FS should be online, touch should succeed + touch $testfile + + # Verify attr recovery + { $ATTR_PROG -g $attr_name $testfile | md5sum; } 2>&1 | _filter_scratch + + echo "" +} + +create_test_file() +{ + filename=$SCRATCH_MNT/$1 + count=$2 + attr_value=$3 + + touch $filename + + for i in `seq $count` + do + $ATTR_PROG -s "attr_name$i" -V $attr_value $filename >> \ + $seqres.full + done +} + +# real QA test starts here +_supported_fs xfs + +_require_scratch +_require_attrs +_require_xfs_io_error_injection "larp" +_require_xfs_io_error_injection "da_leaf_split" +_require_xfs_io_error_injection "larp_leaf_to_node" +_require_xfs_sysfs debug/larp + +# turn on log attributes +echo 1 > /sys/fs/xfs/debug/larp + +attr16="0123456789ABCDEF" +attr64="$attr16$attr16$attr16$attr16" +attr256="$attr64$attr64$attr64$attr64" +attr1k="$attr256$attr256$attr256$attr256" +attr4k="$attr1k$attr1k$attr1k$attr1k" +attr8k="$attr4k$attr4k" +attr16k="$attr8k$attr8k" +attr32k="$attr16k$attr16k" +attr64k="$attr32k$attr32k" + +echo "*** mkfs" +_scratch_mkfs >/dev/null + +echo "*** mount FS" +_scratch_mount + +# empty, inline +create_test_file empty_file1 0 +test_attr_replay empty_file1 "attr_name" $attr64 "s" "larp" +test_attr_replay empty_file1 "attr_name" $attr64 "r" "larp" + +# empty, internal +create_test_file empty_file2 0 +test_attr_replay empty_file2 "attr_name" $attr1k "s" "larp" +test_attr_replay empty_file2 "attr_name" $attr1k "r" "larp" + +# empty, remote +create_test_file empty_file3 0 +test_attr_replay empty_file3 "attr_name" $attr64k "s" "larp" +test_attr_replay empty_file3 "attr_name" $attr64k "r" "larp" + +# inline, inline +create_test_file inline_file1 1 $attr16 +test_attr_replay inline_file1 "attr_name2" $attr64 "s" "larp" +test_attr_replay inline_file1 "attr_name2" $attr64 "r" "larp" + +# inline, internal +create_test_file inline_file2 1 $attr16 +test_attr_replay inline_file2 "attr_name2" $attr1k "s" "larp" +test_attr_replay inline_file2 "attr_name2" $attr1k "r" "larp" + +# inline, remote +create_test_file inline_file3 1 $attr16 +test_attr_replay inline_file3 "attr_name2" $attr64k "s" "larp" +test_attr_replay inline_file3 "attr_name2" $attr64k "r" "larp" + +# extent, internal +create_test_file extent_file1 1 $attr1k +test_attr_replay extent_file1 "attr_name2" $attr1k "s" "larp" +test_attr_replay extent_file1 "attr_name2" $attr1k "r" "larp" + +# extent, inject error on split +create_test_file extent_file2 3 $attr1k +test_attr_replay extent_file2 "attr_name4" $attr1k "s" "da_leaf_split" + +# extent, inject error on fork transition +create_test_file extent_file3 3 $attr1k +test_attr_replay extent_file3 "attr_name4" $attr1k "s" "larp_leaf_to_node" + +# extent, remote +create_test_file extent_file4 1 $attr1k +test_attr_replay extent_file4 "attr_name2" $attr64k "s" "larp" +test_attr_replay extent_file4 "attr_name2" $attr64k "r" "larp" + +# remote, internal +create_test_file remote_file1 1 $attr64k +test_attr_replay remote_file1 "attr_name2" $attr1k "s" "larp" +test_attr_replay remote_file1 "attr_name2" $attr1k "r" "larp" + +# remote, remote +create_test_file remote_file2 1 $attr64k +test_attr_replay remote_file2 "attr_name2" $attr64k "s" "larp" +test_attr_replay remote_file2 "attr_name2" $attr64k "r" "larp" + +# replace shortform +create_test_file sf_file 2 $attr64 +test_attr_replay sf_file "attr_name2" $attr64 "s" "larp" + +# replace leaf +create_test_file leaf_file 2 $attr1k +test_attr_replay leaf_file "attr_name2" $attr1k "s" "larp" + +# replace node +create_test_file node_file 1 $attr64k +$ATTR_PROG -s "attr_name2" -V $attr1k $SCRATCH_MNT/node_file \ + >> $seqres.full +test_attr_replay node_file "attr_name2" $attr1k "s" "larp" + +echo "*** done" +status=0 +exit diff --git a/tests/xfs/543.out b/tests/xfs/543.out new file mode 100644 index 00000000..075eecb3 --- /dev/null +++ b/tests/xfs/543.out @@ -0,0 +1,149 @@ +QA output created by 543 +*** mkfs +*** mount FS +attr_set: Input/output error +Could not set "attr_name" for SCRATCH_MNT/empty_file1 +touch: cannot touch 'SCRATCH_MNT/empty_file1': Input/output error +db6747306e971b6e3fd474aae10159a1 - + +attr_remove: Input/output error +Could not remove "attr_name" for SCRATCH_MNT/empty_file1 +touch: cannot touch 'SCRATCH_MNT/empty_file1': Input/output error +attr_get: No data available +Could not get "attr_name" for SCRATCH_MNT/empty_file1 +d41d8cd98f00b204e9800998ecf8427e - + +attr_set: Input/output error +Could not set "attr_name" for SCRATCH_MNT/empty_file2 +touch: cannot touch 'SCRATCH_MNT/empty_file2': Input/output error +d489897d7ba99c2815052ae7dca29097 - + +attr_remove: Input/output error +Could not remove "attr_name" for SCRATCH_MNT/empty_file2 +touch: cannot touch 'SCRATCH_MNT/empty_file2': Input/output error +attr_get: No data available +Could not get "attr_name" for SCRATCH_MNT/empty_file2 +d41d8cd98f00b204e9800998ecf8427e - + +attr_set: Input/output error +Could not set "attr_name" for SCRATCH_MNT/empty_file3 +touch: cannot touch 'SCRATCH_MNT/empty_file3': Input/output error +0ba8b18d622a11b5ff89336761380857 - + +attr_remove: Input/output error +Could not remove "attr_name" for SCRATCH_MNT/empty_file3 +touch: cannot touch 'SCRATCH_MNT/empty_file3': Input/output error +attr_get: No data available +Could not get "attr_name" for SCRATCH_MNT/empty_file3 +d41d8cd98f00b204e9800998ecf8427e - + +attr_set: Input/output error +Could not set "attr_name2" for SCRATCH_MNT/inline_file1 +touch: cannot touch 'SCRATCH_MNT/inline_file1': Input/output error +49f4f904e12102a3423d8ab3f845e6e8 - + +attr_remove: Input/output error +Could not remove "attr_name2" for SCRATCH_MNT/inline_file1 +touch: cannot touch 'SCRATCH_MNT/inline_file1': Input/output error +attr_get: No data available +Could not get "attr_name2" for SCRATCH_MNT/inline_file1 +d41d8cd98f00b204e9800998ecf8427e - + +attr_set: Input/output error +Could not set "attr_name2" for SCRATCH_MNT/inline_file2 +touch: cannot touch 'SCRATCH_MNT/inline_file2': Input/output error +6a0bd8b5aaa619bcd51f2ead0208f1bb - + +attr_remove: Input/output error +Could not remove "attr_name2" for SCRATCH_MNT/inline_file2 +touch: cannot touch 'SCRATCH_MNT/inline_file2': Input/output error +attr_get: No data available +Could not get "attr_name2" for SCRATCH_MNT/inline_file2 +d41d8cd98f00b204e9800998ecf8427e - + +attr_set: Input/output error +Could not set "attr_name2" for SCRATCH_MNT/inline_file3 +touch: cannot touch 'SCRATCH_MNT/inline_file3': Input/output error +3276329baa72c32f0a4a5cb0dbf813df - + +attr_remove: Input/output error +Could not remove "attr_name2" for SCRATCH_MNT/inline_file3 +touch: cannot touch 'SCRATCH_MNT/inline_file3': Input/output error +attr_get: No data available +Could not get "attr_name2" for SCRATCH_MNT/inline_file3 +d41d8cd98f00b204e9800998ecf8427e - + +attr_set: Input/output error +Could not set "attr_name2" for SCRATCH_MNT/extent_file1 +touch: cannot touch 'SCRATCH_MNT/extent_file1': Input/output error +8c6a952b2dbecaa5a308a00d2022e599 - + +attr_remove: Input/output error +Could not remove "attr_name2" for SCRATCH_MNT/extent_file1 +touch: cannot touch 'SCRATCH_MNT/extent_file1': Input/output error +attr_get: No data available +Could not get "attr_name2" for SCRATCH_MNT/extent_file1 +d41d8cd98f00b204e9800998ecf8427e - + +attr_set: Input/output error +Could not set "attr_name4" for SCRATCH_MNT/extent_file2 +touch: cannot touch 'SCRATCH_MNT/extent_file2': Input/output error +c5ae4d474e547819a8807cfde66daba2 - + +attr_set: Input/output error +Could not set "attr_name4" for SCRATCH_MNT/extent_file3 +touch: cannot touch 'SCRATCH_MNT/extent_file3': Input/output error +17bae95be35ce7a0e6d4327b67da932b - + +attr_set: Input/output error +Could not set "attr_name2" for SCRATCH_MNT/extent_file4 +touch: cannot touch 'SCRATCH_MNT/extent_file4': Input/output error +d17d94c39a964409b8b8173a51f8e951 - + +attr_remove: Input/output error +Could not remove "attr_name2" for SCRATCH_MNT/extent_file4 +touch: cannot touch 'SCRATCH_MNT/extent_file4': Input/output error +attr_get: No data available +Could not get "attr_name2" for SCRATCH_MNT/extent_file4 +d41d8cd98f00b204e9800998ecf8427e - + +attr_set: Input/output error +Could not set "attr_name2" for SCRATCH_MNT/remote_file1 +touch: cannot touch 'SCRATCH_MNT/remote_file1': Input/output error +4104e21da013632e636cdd044884ca94 - + +attr_remove: Input/output error +Could not remove "attr_name2" for SCRATCH_MNT/remote_file1 +touch: cannot touch 'SCRATCH_MNT/remote_file1': Input/output error +attr_get: No data available +Could not get "attr_name2" for SCRATCH_MNT/remote_file1 +d41d8cd98f00b204e9800998ecf8427e - + +attr_set: Input/output error +Could not set "attr_name2" for SCRATCH_MNT/remote_file2 +touch: cannot touch 'SCRATCH_MNT/remote_file2': Input/output error +9ac16e37ecd6f6c24de3f724c49199a8 - + +attr_remove: Input/output error +Could not remove "attr_name2" for SCRATCH_MNT/remote_file2 +touch: cannot touch 'SCRATCH_MNT/remote_file2': Input/output error +attr_get: No data available +Could not get "attr_name2" for SCRATCH_MNT/remote_file2 +d41d8cd98f00b204e9800998ecf8427e - + +attr_set: Input/output error +Could not set "attr_name2" for SCRATCH_MNT/sf_file +touch: cannot touch 'SCRATCH_MNT/sf_file': Input/output error +33bc798a506b093a7c2cdea122a738d7 - + +attr_set: Input/output error +Could not set "attr_name2" for SCRATCH_MNT/leaf_file +touch: cannot touch 'SCRATCH_MNT/leaf_file': Input/output error +dec146c586813046f4b876bcecbaa713 - + +attr_set: Input/output error +Could not set "attr_name2" for SCRATCH_MNT/node_file +touch: cannot touch 'SCRATCH_MNT/node_file': Input/output error +e97ce3d15f9f28607b51f76bf8b7296c - + +*** done