| Message ID | 20240227173945.2945637-1-kernel@pankajraghav.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | misc: fix test that fail formatting with 64k blocksize | expand |
On Tue, Feb 27, 2024 at 06:39:45PM +0100, Pankaj Raghav (Samsung) wrote: > From: "Darrick J. Wong" <djwong@kernel.org> > > There's a bunch of tests that fail the formatting step when the test run > is configured to use XFS with a 64k blocksize. This happens because XFS > doesn't really support that combination due to minimum log size > constraints. Fix the test to format larger devices in that case. > > Signed-off-by: Darrick J. Wong <djwong@kernel.org> > Co-developed-by: Pankaj Raghav <p.raghav@samsung.com> > Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> > --- This change looks good to me, and it really fixes some testing failures. Reviewed-by: Zorro Lang <zlang@redhat.com> BTW, I tested 64k blocksize xfs with this patch, there're still some failed test cases. If you're still interested in it, I'd like to list some of them as below (diff *.out *.out.bad output). Thanks, Zorro *generic/209 failed as:* --- /dev/fd/63 2024-03-12 13:21:39.068413534 -0400 +++ generic/219.out.bad 2024-03-12 13:21:38.898422979 -0400 @@ -16,7 +16,7 @@ Size: 49152 Filetype: Regular File File: "SCRATCH_MNT/mmap" Size: 49152 Filetype: Regular File -Usage OK (type=u) +Too many blocks used (type=u) ### test group accounting @@ -34,4 +34,4 @@ Size: 49152 Filetype: Regular File File: "SCRATCH_MNT/mmap" Size: 49152 Filetype: Regular File -Usage OK (type=g) +Too many blocks used (type=g) *generic/305 failed as:* --- /dev/fd/63 2024-03-12 14:23:31.267112014 -0400 +++ generic/305.out.bad 2024-03-12 14:23:31.187112447 -0400 @@ -11,7 +11,7 @@ CoW one of the files root 0 0 0 nobody 0 0 0 -fsgqa 3072 0 0 +fsgqa 3584 0 0 Remount the FS to see if accounting changes root 0 0 0 nobody 0 0 0 *generic/326 failed as:* --- /dev/fd/63 2024-03-12 14:31:14.114629354 -0400 +++ generic/326.out.bad 2024-03-12 14:31:14.034629780 -0400 @@ -11,7 +11,7 @@ CoW one of the files root 0 0 0 nobody 0 0 0 -fsgqa 3072 0 0 +fsgqa 3584 0 0 Remount the FS to see if accounting changes root 0 0 0 nobody 0 0 0 *generic/619 failed as:* --- /dev/fd/63 2024-03-12 15:59:59.575021573 -0400 +++ generic/619.out.bad 2024-03-12 15:59:59.505021947 -0400 @@ -1,2 +1,6 @@ QA output created by 619 -Silence is golden +FAIL: ENOSPC BUS faliure +Small-file-ftruncate-test failed at iteration count: 2 +Filesystem Type Size Used Avail Use% Mounted on +/dev/vda3 xfs 208M 140M 69M 68% /mnt/xfstests/scratch +Allocated: 70.0% Used: 68% *generic/645 failed as:* --- /dev/fd/63 2024-03-12 16:04:51.623473964 -0400 +++ generic/645.out.bad 2024-03-12 16:04:51.553474333 -0400 @@ -1,2 +1,4 @@ QA output created by 645 Silence is golden +idmapped-mounts.c: 6671: nested_userns - Invalid argument - failure: sys_mount_setattr +vfstest.c: 2418: run_test - Invalid argument - failure: test that nested user namespaces behave correctly when attached to idmapped mounts *xfs/435 failed as:* --- /dev/fd/63 2024-03-12 18:36:55.121259810 -0400 +++ xfs/435.out.bad 2024-03-12 18:36:55.051260220 -0400 @@ -3,3 +3,4 @@ Create a many-block file Remount to check recovery See if we leak +custom patient module removal for xfs timed out waiting for refcnt to become 0 using timeout of 50 *xfs/508 failed as:* --- /dev/fd/63 2024-03-12 19:04:12.742260242 -0400 +++ xfs/508.out.bad 2024-03-12 19:04:12.672260624 -0400 @@ -1,12 +1,15 @@ QA output created by 508 == The parent directory has Project inheritance bit by default == +touch: cannot touch '/mnt/xfstests/scratch/dir/foo': No space left on device +mkdir: cannot create directory '/mnt/xfstests/scratch/dir/dir_inherit': No space left on device +touch: cannot touch '/mnt/xfstests/scratch/dir/dir_inherit/foo': No such file or directory Checking project test (path [SCR_MNT]/dir)... Processed 1 ([PROJECTS_FILE] and cmdline) paths for project test with recursion depth infinite (-1). Write SCRATCH_MNT/dir/foo, expect ENOSPC: -pwrite: No space left on device +/mnt/xfstests/scratch/dir/foo: No space left on device Write SCRATCH_MNT/dir/dir_inherit/foo, expect ENOSPC: -pwrite: No space left on device +/mnt/xfstests/scratch/dir/dir_inherit/foo: No such file or directory == After removing parent directory has Project inheritance bit == Checking project test (path [SCR_MNT]/dir)... @@ -19,5 +22,5 @@ Write SCRATCH_MNT/dir/foo, expect Success: Write SCRATCH_MNT/dir/dir_inherit/foo, expect ENOSPC: -pwrite: No space left on device +/mnt/xfstests/scratch/dir/dir_inherit/foo: No such file or directory Write SCRATCH_MNT/dir/dir_uninherit/foo, expect Success: *xfs/558 failed as:* --- /dev/fd/63 2024-03-12 19:13:26.569223817 -0400 +++ xfs/558.out.bad 2024-03-12 19:13:26.489224254 -0400 @@ -1,2 +1,3 @@ QA output created by 558 +Expected to hear about writeback iomap invalidations? Silence is golden > @Darrick I added more tests that were failing, and increased 512m to 600m > as generic/081 and generic/108 were still failing with 512m with > the following on 64k page size system: > MKFS_OPTIONS='-f -m reflink=1,rmapbt=1, -i sparse=1, -b size=64k,' > > common/rc | 29 +++++++++++++++++++++++++++++ > tests/generic/042 | 9 +-------- > tests/generic/081 | 7 +++++-- > tests/generic/108 | 6 ++++-- > tests/generic/455 | 3 ++- > tests/generic/457 | 3 ++- > tests/generic/482 | 3 ++- > tests/generic/704 | 3 ++- > tests/generic/730 | 3 ++- > tests/generic/731 | 3 ++- > tests/shared/298 | 2 +- > tests/xfs/279 | 7 ++++--- > 12 files changed, 56 insertions(+), 22 deletions(-) > > diff --git a/common/rc b/common/rc > index 30c44ddd..f1a27bcd 100644 > --- a/common/rc > +++ b/common/rc > @@ -923,6 +923,35 @@ _check_minimal_fs_size() > fi > } > > +# Round a proposed filesystem size up to the minimium supported size. The > +# input is in MB and so is the output. > +_small_fs_size_mb() > +{ > + local size="$1" > + local runner_min_size=0 > + local fs_min_size=0 > + > + case "$FSTYP" in > + xfs) > + # xfs no longer supports filesystems smaller than 600m > + fs_min_size=600 > + ;; > + f2fs) > + # f2fs-utils 1.9.0 needs at least 38 MB space for f2fs image. > + # However, f2fs-utils 1.14.0 needs at least 52 MB. Not sure if > + # it will change again. So just set it 128M. > + fs_min_size=128 > + ;; > + esac > + (( size < fs_min_size )) && size="$fs_min_size" > + > + # If the test runner wanted a minimum size, enforce that here. > + test -n "$MIN_FSSIZE" && runner_min_size=$((MIN_FSSIZE / 1048576)) > + (( size < runner_min_size)) && size="$runner_min_size" > + > + echo "$size" > +} > + > # Create fs of certain size on scratch device > # _scratch_mkfs_sized <size in bytes> [optional blocksize] > _scratch_mkfs_sized() > diff --git a/tests/generic/042 b/tests/generic/042 > index 5116183f..63a46d6b 100755 > --- a/tests/generic/042 > +++ b/tests/generic/042 > @@ -27,14 +27,7 @@ _crashtest() > img=$SCRATCH_MNT/$seq.img > mnt=$SCRATCH_MNT/$seq.mnt > file=$mnt/file > - size=25M > - > - # f2fs-utils 1.9.0 needs at least 38 MB space for f2fs image. However, > - # f2fs-utils 1.14.0 needs at least 52 MB. Not sure if it will change > - # again. So just set it 128M. > - if [ $FSTYP == "f2fs" ]; then > - size=128M > - fi > + size=$(_small_fs_size_mb 25)M > > # Create an fs on a small, initialized image. The pattern is written to > # the image to detect stale data exposure. > diff --git a/tests/generic/081 b/tests/generic/081 > index 22ac94de..0996f221 100755 > --- a/tests/generic/081 > +++ b/tests/generic/081 > @@ -62,13 +62,16 @@ snapname=snap_$seq > mnt=$TEST_DIR/mnt_$seq > mkdir -p $mnt > > +size=$(_small_fs_size_mb 300) > +lvsize=$((size * 85 / 100)) # ~256M > + > # make sure there's enough disk space for 256M lv, test for 300M here in case > # lvm uses some space for metadata > -_scratch_mkfs_sized $((300 * 1024 * 1024)) >>$seqres.full 2>&1 > +_scratch_mkfs_sized $((size * 1024 * 1024)) >>$seqres.full 2>&1 > $LVM_PROG vgcreate -f $vgname $SCRATCH_DEV >>$seqres.full 2>&1 > # We use yes pipe instead of 'lvcreate --yes' because old version of lvm > # (like 2.02.95 in RHEL6) don't support --yes option > -yes | $LVM_PROG lvcreate -L 256M -n $lvname $vgname >>$seqres.full 2>&1 > +yes | $LVM_PROG lvcreate -L ${lvsize}M -n $lvname $vgname >>$seqres.full 2>&1 > # wait for lvcreation to fully complete > $UDEV_SETTLE_PROG >>$seqres.full 2>&1 > > diff --git a/tests/generic/108 b/tests/generic/108 > index efe66ba5..07703fc8 100755 > --- a/tests/generic/108 > +++ b/tests/generic/108 > @@ -44,9 +44,11 @@ vgname=vg_$seq > > physical=`blockdev --getpbsz $SCRATCH_DEV` > logical=`blockdev --getss $SCRATCH_DEV` > +size=$(_small_fs_size_mb 300) > +lvsize=$((size * 91 / 100)) > > # _get_scsi_debug_dev returns a scsi debug device with 128M in size by default > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev ${physical:-512} ${logical:-512} 0 300` > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev ${physical:-512} ${logical:-512} 0 $size` > test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device" > echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full > > @@ -55,7 +57,7 @@ $LVM_PROG pvcreate -f $SCSI_DEBUG_DEV $SCRATCH_DEV >>$seqres.full 2>&1 > $LVM_PROG vgcreate -f $vgname $SCSI_DEBUG_DEV $SCRATCH_DEV >>$seqres.full 2>&1 > # We use yes pipe instead of 'lvcreate --yes' because old version of lvm > # (like 2.02.95 in RHEL6) don't support --yes option > -yes | $LVM_PROG lvcreate -i 2 -I 4m -L 275m -n $lvname $vgname \ > +yes | $LVM_PROG lvcreate -i 2 -I 4m -L ${lvsize}m -n $lvname $vgname \ > >>$seqres.full 2>&1 > # wait for lv creation to fully complete > $UDEV_SETTLE_PROG >>$seqres.full 2>&1 > diff --git a/tests/generic/455 b/tests/generic/455 > index c13d872c..da803de0 100755 > --- a/tests/generic/455 > +++ b/tests/generic/455 > @@ -51,7 +51,8 @@ SANITY_DIR=$TEST_DIR/fsxtests > rm -rf $SANITY_DIR > mkdir $SANITY_DIR > > -devsize=$((1024*1024*200 / 512)) # 200m phys/virt size > +size=$(_small_fs_size_mb 200) # 200m phys/virt size > +devsize=$((1024*1024*size / 512)) > csize=$((1024*64 / 512)) # 64k cluster size > lowspace=$((1024*1024 / 512)) # 1m low space threshold > > diff --git a/tests/generic/457 b/tests/generic/457 > index ca0f5e62..03aeb814 100755 > --- a/tests/generic/457 > +++ b/tests/generic/457 > @@ -55,7 +55,8 @@ SANITY_DIR=$TEST_DIR/fsxtests > rm -rf $SANITY_DIR > mkdir $SANITY_DIR > > -devsize=$((1024*1024*200 / 512)) # 200m phys/virt size > +size=$(_small_fs_size_mb 200) # 200m phys/virt size > +devsize=$((1024*1024*size / 512)) > csize=$((1024*64 / 512)) # 64k cluster size > lowspace=$((1024*1024 / 512)) # 1m low space threshold > > diff --git a/tests/generic/482 b/tests/generic/482 > index 6d8396d9..c647d24c 100755 > --- a/tests/generic/482 > +++ b/tests/generic/482 > @@ -65,7 +65,8 @@ fi > fsstress_args=$(_scale_fsstress_args -w -d $SCRATCH_MNT -n 512 -p $nr_cpus \ > $FSSTRESS_AVOID) > > -devsize=$((1024*1024*200 / 512)) # 200m phys/virt size > +size=$(_small_fs_size_mb 200) # 200m phys/virt size > +devsize=$((1024*1024*size / 512)) > csize=$((1024*64 / 512)) # 64k cluster size > lowspace=$((1024*1024 / 512)) # 1m low space threshold > > diff --git a/tests/generic/704 b/tests/generic/704 > index c0142a60..6cc4bb4a 100755 > --- a/tests/generic/704 > +++ b/tests/generic/704 > @@ -30,8 +30,9 @@ _require_scsi_debug > _require_test > _require_block_device $TEST_DEV > > +size=$(_small_fs_size_mb 256) > echo "Get a device with 4096 physical sector size and 512 logical sector size" > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 256` > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 $size` > blockdev --getpbsz --getss $SCSI_DEBUG_DEV > > echo "mkfs and mount" > diff --git a/tests/generic/730 b/tests/generic/730 > index 11308cda..988c47e1 100755 > --- a/tests/generic/730 > +++ b/tests/generic/730 > @@ -27,7 +27,8 @@ _require_test > _require_block_device $TEST_DEV > _require_scsi_debug > > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 256` > +size=$(_small_fs_size_mb 256) > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 $size` > test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device" > echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full > > diff --git a/tests/generic/731 b/tests/generic/731 > index e1400d06..b279e3f7 100755 > --- a/tests/generic/731 > +++ b/tests/generic/731 > @@ -27,7 +27,8 @@ _require_block_device $TEST_DEV > _supported_fs generic > _require_scsi_debug > > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 256` > +size=$(_small_fs_size_mb 256) > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 $size` > test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device" > echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full > > diff --git a/tests/shared/298 b/tests/shared/298 > index 807d4c87..52bfffb8 100755 > --- a/tests/shared/298 > +++ b/tests/shared/298 > @@ -20,7 +20,7 @@ if [ "$FSTYP" = "btrfs" ]; then > fssize=3000 > else > _require_fs_space $TEST_DIR 307200 > - fssize=300 > + fssize=$(_small_fs_size_mb 300) # 200m phys/virt size > fi > > [ "$FSTYP" = "ext4" ] && _require_dumpe2fs > diff --git a/tests/xfs/279 b/tests/xfs/279 > index 835d187f..9f366d1e 100755 > --- a/tests/xfs/279 > +++ b/tests/xfs/279 > @@ -26,6 +26,7 @@ _cleanup() > _supported_fs xfs > > _require_scsi_debug > +size=$(_small_fs_size_mb 128) > > # Remove xfs signature so -f isn't needed to re-mkfs > _wipe_device() > @@ -55,7 +56,7 @@ _check_mkfs() > ( > echo "===================" > echo "4k physical 512b logical aligned" > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128` > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 $size` > test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device" > # sector size should default to 4k > _check_mkfs $SCSI_DEBUG_DEV > @@ -68,7 +69,7 @@ _put_scsi_debug_dev > ( > echo "===================" > echo "4k physical 512b logical unaligned" > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 1 128` > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 1 $size` > test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device" > # should fail on misalignment > _check_mkfs $SCSI_DEBUG_DEV > @@ -85,7 +86,7 @@ _put_scsi_debug_dev > ( > echo "===================" > echo "hard 4k physical / 4k logical" > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 128` > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 $size` > test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device" > # block size smaller than sector size should fail > _check_mkfs -b size=2048 $SCSI_DEBUG_DEV > > base-commit: 386c7b6aa69ebe8017a4728a994f80d55c660de4 > -- > 2.43.0 > >
On Wed, Mar 13, 2024 at 11:16:29PM +0800, Zorro Lang wrote: > On Tue, Feb 27, 2024 at 06:39:45PM +0100, Pankaj Raghav (Samsung) wrote: > > From: "Darrick J. Wong" <djwong@kernel.org> > > > > There's a bunch of tests that fail the formatting step when the test run > > is configured to use XFS with a 64k blocksize. This happens because XFS > > doesn't really support that combination due to minimum log size > > constraints. Fix the test to format larger devices in that case. > > > > Signed-off-by: Darrick J. Wong <djwong@kernel.org> > > Co-developed-by: Pankaj Raghav <p.raghav@samsung.com> > > Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> > > --- > > This change looks good to me, and it really fixes some testing failures. > > Reviewed-by: Zorro Lang <zlang@redhat.com> > > BTW, I tested 64k blocksize xfs with this patch, there're still some failed > test cases. If you're still interested in it, I'd like to list some of them > as below (diff *.out *.out.bad output). > > Thanks, > Zorro > > *generic/209 failed as:* > > --- /dev/fd/63 2024-03-12 13:21:39.068413534 -0400 > +++ generic/219.out.bad 2024-03-12 13:21:38.898422979 -0400 > @@ -16,7 +16,7 @@ > Size: 49152 Filetype: Regular File > File: "SCRATCH_MNT/mmap" > Size: 49152 Filetype: Regular File > -Usage OK (type=u) > +Too many blocks used (type=u) > > ### test group accounting > > @@ -34,4 +34,4 @@ > Size: 49152 Filetype: Regular File > File: "SCRATCH_MNT/mmap" > Size: 49152 Filetype: Regular File > -Usage OK (type=g) > +Too many blocks used (type=g) > > *generic/305 failed as:* > > --- /dev/fd/63 2024-03-12 14:23:31.267112014 -0400 > +++ generic/305.out.bad 2024-03-12 14:23:31.187112447 -0400 > @@ -11,7 +11,7 @@ > CoW one of the files > root 0 0 0 > nobody 0 0 0 > -fsgqa 3072 0 0 > +fsgqa 3584 0 0 > Remount the FS to see if accounting changes > root 0 0 0 > nobody 0 0 0 > > *generic/326 failed as:* > > --- /dev/fd/63 2024-03-12 14:31:14.114629354 -0400 > +++ generic/326.out.bad 2024-03-12 14:31:14.034629780 -0400 > @@ -11,7 +11,7 @@ > CoW one of the files > root 0 0 0 > nobody 0 0 0 > -fsgqa 3072 0 0 > +fsgqa 3584 0 0 > Remount the FS to see if accounting changes > root 0 0 0 > nobody 0 0 0 > > *generic/619 failed as:* > > --- /dev/fd/63 2024-03-12 15:59:59.575021573 -0400 > +++ generic/619.out.bad 2024-03-12 15:59:59.505021947 -0400 > @@ -1,2 +1,6 @@ > QA output created by 619 > -Silence is golden > +FAIL: ENOSPC BUS faliure > +Small-file-ftruncate-test failed at iteration count: 2 > +Filesystem Type Size Used Avail Use% Mounted on > +/dev/vda3 xfs 208M 140M 69M 68% /mnt/xfstests/scratch > +Allocated: 70.0% Used: 68% > > *generic/645 failed as:* > > --- /dev/fd/63 2024-03-12 16:04:51.623473964 -0400 > +++ generic/645.out.bad 2024-03-12 16:04:51.553474333 -0400 > @@ -1,2 +1,4 @@ > QA output created by 645 > Silence is golden > +idmapped-mounts.c: 6671: nested_userns - Invalid argument - failure: sys_mount_setattr > +vfstest.c: 2418: run_test - Invalid argument - failure: test that nested user namespaces behave correctly when attached to idmapped mounts > > *xfs/435 failed as:* > > --- /dev/fd/63 2024-03-12 18:36:55.121259810 -0400 > +++ xfs/435.out.bad 2024-03-12 18:36:55.051260220 -0400 > @@ -3,3 +3,4 @@ > Create a many-block file > Remount to check recovery > See if we leak > +custom patient module removal for xfs timed out waiting for refcnt to become 0 using timeout of 50 > > *xfs/508 failed as:* > > --- /dev/fd/63 2024-03-12 19:04:12.742260242 -0400 > +++ xfs/508.out.bad 2024-03-12 19:04:12.672260624 -0400 > @@ -1,12 +1,15 @@ > QA output created by 508 > == The parent directory has Project inheritance bit by default == > +touch: cannot touch '/mnt/xfstests/scratch/dir/foo': No space left on device > +mkdir: cannot create directory '/mnt/xfstests/scratch/dir/dir_inherit': No space left on device > +touch: cannot touch '/mnt/xfstests/scratch/dir/dir_inherit/foo': No such file or directory > Checking project test (path [SCR_MNT]/dir)... > Processed 1 ([PROJECTS_FILE] and cmdline) paths for project test with recursion depth infinite (-1). > > Write SCRATCH_MNT/dir/foo, expect ENOSPC: > -pwrite: No space left on device > +/mnt/xfstests/scratch/dir/foo: No space left on device > Write SCRATCH_MNT/dir/dir_inherit/foo, expect ENOSPC: > -pwrite: No space left on device > +/mnt/xfstests/scratch/dir/dir_inherit/foo: No such file or directory > > == After removing parent directory has Project inheritance bit == > Checking project test (path [SCR_MNT]/dir)... > @@ -19,5 +22,5 @@ > > Write SCRATCH_MNT/dir/foo, expect Success: > Write SCRATCH_MNT/dir/dir_inherit/foo, expect ENOSPC: > -pwrite: No space left on device > +/mnt/xfstests/scratch/dir/dir_inherit/foo: No such file or directory > Write SCRATCH_MNT/dir/dir_uninherit/foo, expect Success: > > *xfs/558 failed as:* > > --- /dev/fd/63 2024-03-12 19:13:26.569223817 -0400 > +++ xfs/558.out.bad 2024-03-12 19:13:26.489224254 -0400 > @@ -1,2 +1,3 @@ > QA output created by 558 > +Expected to hear about writeback iomap invalidations? > Silence is golden Except for generic/645, those are all familiar failures to me. :/ --D > > > > > @Darrick I added more tests that were failing, and increased 512m to 600m > > as generic/081 and generic/108 were still failing with 512m with > > the following on 64k page size system: > > MKFS_OPTIONS='-f -m reflink=1,rmapbt=1, -i sparse=1, -b size=64k,' > > > > common/rc | 29 +++++++++++++++++++++++++++++ > > tests/generic/042 | 9 +-------- > > tests/generic/081 | 7 +++++-- > > tests/generic/108 | 6 ++++-- > > tests/generic/455 | 3 ++- > > tests/generic/457 | 3 ++- > > tests/generic/482 | 3 ++- > > tests/generic/704 | 3 ++- > > tests/generic/730 | 3 ++- > > tests/generic/731 | 3 ++- > > tests/shared/298 | 2 +- > > tests/xfs/279 | 7 ++++--- > > 12 files changed, 56 insertions(+), 22 deletions(-) > > > > diff --git a/common/rc b/common/rc > > index 30c44ddd..f1a27bcd 100644 > > --- a/common/rc > > +++ b/common/rc > > @@ -923,6 +923,35 @@ _check_minimal_fs_size() > > fi > > } > > > > +# Round a proposed filesystem size up to the minimium supported size. The > > +# input is in MB and so is the output. > > +_small_fs_size_mb() > > +{ > > + local size="$1" > > + local runner_min_size=0 > > + local fs_min_size=0 > > + > > + case "$FSTYP" in > > + xfs) > > + # xfs no longer supports filesystems smaller than 600m > > + fs_min_size=600 > > + ;; > > + f2fs) > > + # f2fs-utils 1.9.0 needs at least 38 MB space for f2fs image. > > + # However, f2fs-utils 1.14.0 needs at least 52 MB. Not sure if > > + # it will change again. So just set it 128M. > > + fs_min_size=128 > > + ;; > > + esac > > + (( size < fs_min_size )) && size="$fs_min_size" > > + > > + # If the test runner wanted a minimum size, enforce that here. > > + test -n "$MIN_FSSIZE" && runner_min_size=$((MIN_FSSIZE / 1048576)) > > + (( size < runner_min_size)) && size="$runner_min_size" > > + > > + echo "$size" > > +} > > + > > # Create fs of certain size on scratch device > > # _scratch_mkfs_sized <size in bytes> [optional blocksize] > > _scratch_mkfs_sized() > > diff --git a/tests/generic/042 b/tests/generic/042 > > index 5116183f..63a46d6b 100755 > > --- a/tests/generic/042 > > +++ b/tests/generic/042 > > @@ -27,14 +27,7 @@ _crashtest() > > img=$SCRATCH_MNT/$seq.img > > mnt=$SCRATCH_MNT/$seq.mnt > > file=$mnt/file > > - size=25M > > - > > - # f2fs-utils 1.9.0 needs at least 38 MB space for f2fs image. However, > > - # f2fs-utils 1.14.0 needs at least 52 MB. Not sure if it will change > > - # again. So just set it 128M. > > - if [ $FSTYP == "f2fs" ]; then > > - size=128M > > - fi > > + size=$(_small_fs_size_mb 25)M > > > > # Create an fs on a small, initialized image. The pattern is written to > > # the image to detect stale data exposure. > > diff --git a/tests/generic/081 b/tests/generic/081 > > index 22ac94de..0996f221 100755 > > --- a/tests/generic/081 > > +++ b/tests/generic/081 > > @@ -62,13 +62,16 @@ snapname=snap_$seq > > mnt=$TEST_DIR/mnt_$seq > > mkdir -p $mnt > > > > +size=$(_small_fs_size_mb 300) > > +lvsize=$((size * 85 / 100)) # ~256M > > + > > # make sure there's enough disk space for 256M lv, test for 300M here in case > > # lvm uses some space for metadata > > -_scratch_mkfs_sized $((300 * 1024 * 1024)) >>$seqres.full 2>&1 > > +_scratch_mkfs_sized $((size * 1024 * 1024)) >>$seqres.full 2>&1 > > $LVM_PROG vgcreate -f $vgname $SCRATCH_DEV >>$seqres.full 2>&1 > > # We use yes pipe instead of 'lvcreate --yes' because old version of lvm > > # (like 2.02.95 in RHEL6) don't support --yes option > > -yes | $LVM_PROG lvcreate -L 256M -n $lvname $vgname >>$seqres.full 2>&1 > > +yes | $LVM_PROG lvcreate -L ${lvsize}M -n $lvname $vgname >>$seqres.full 2>&1 > > # wait for lvcreation to fully complete > > $UDEV_SETTLE_PROG >>$seqres.full 2>&1 > > > > diff --git a/tests/generic/108 b/tests/generic/108 > > index efe66ba5..07703fc8 100755 > > --- a/tests/generic/108 > > +++ b/tests/generic/108 > > @@ -44,9 +44,11 @@ vgname=vg_$seq > > > > physical=`blockdev --getpbsz $SCRATCH_DEV` > > logical=`blockdev --getss $SCRATCH_DEV` > > +size=$(_small_fs_size_mb 300) > > +lvsize=$((size * 91 / 100)) > > > > # _get_scsi_debug_dev returns a scsi debug device with 128M in size by default > > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev ${physical:-512} ${logical:-512} 0 300` > > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev ${physical:-512} ${logical:-512} 0 $size` > > test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device" > > echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full > > > > @@ -55,7 +57,7 @@ $LVM_PROG pvcreate -f $SCSI_DEBUG_DEV $SCRATCH_DEV >>$seqres.full 2>&1 > > $LVM_PROG vgcreate -f $vgname $SCSI_DEBUG_DEV $SCRATCH_DEV >>$seqres.full 2>&1 > > # We use yes pipe instead of 'lvcreate --yes' because old version of lvm > > # (like 2.02.95 in RHEL6) don't support --yes option > > -yes | $LVM_PROG lvcreate -i 2 -I 4m -L 275m -n $lvname $vgname \ > > +yes | $LVM_PROG lvcreate -i 2 -I 4m -L ${lvsize}m -n $lvname $vgname \ > > >>$seqres.full 2>&1 > > # wait for lv creation to fully complete > > $UDEV_SETTLE_PROG >>$seqres.full 2>&1 > > diff --git a/tests/generic/455 b/tests/generic/455 > > index c13d872c..da803de0 100755 > > --- a/tests/generic/455 > > +++ b/tests/generic/455 > > @@ -51,7 +51,8 @@ SANITY_DIR=$TEST_DIR/fsxtests > > rm -rf $SANITY_DIR > > mkdir $SANITY_DIR > > > > -devsize=$((1024*1024*200 / 512)) # 200m phys/virt size > > +size=$(_small_fs_size_mb 200) # 200m phys/virt size > > +devsize=$((1024*1024*size / 512)) > > csize=$((1024*64 / 512)) # 64k cluster size > > lowspace=$((1024*1024 / 512)) # 1m low space threshold > > > > diff --git a/tests/generic/457 b/tests/generic/457 > > index ca0f5e62..03aeb814 100755 > > --- a/tests/generic/457 > > +++ b/tests/generic/457 > > @@ -55,7 +55,8 @@ SANITY_DIR=$TEST_DIR/fsxtests > > rm -rf $SANITY_DIR > > mkdir $SANITY_DIR > > > > -devsize=$((1024*1024*200 / 512)) # 200m phys/virt size > > +size=$(_small_fs_size_mb 200) # 200m phys/virt size > > +devsize=$((1024*1024*size / 512)) > > csize=$((1024*64 / 512)) # 64k cluster size > > lowspace=$((1024*1024 / 512)) # 1m low space threshold > > > > diff --git a/tests/generic/482 b/tests/generic/482 > > index 6d8396d9..c647d24c 100755 > > --- a/tests/generic/482 > > +++ b/tests/generic/482 > > @@ -65,7 +65,8 @@ fi > > fsstress_args=$(_scale_fsstress_args -w -d $SCRATCH_MNT -n 512 -p $nr_cpus \ > > $FSSTRESS_AVOID) > > > > -devsize=$((1024*1024*200 / 512)) # 200m phys/virt size > > +size=$(_small_fs_size_mb 200) # 200m phys/virt size > > +devsize=$((1024*1024*size / 512)) > > csize=$((1024*64 / 512)) # 64k cluster size > > lowspace=$((1024*1024 / 512)) # 1m low space threshold > > > > diff --git a/tests/generic/704 b/tests/generic/704 > > index c0142a60..6cc4bb4a 100755 > > --- a/tests/generic/704 > > +++ b/tests/generic/704 > > @@ -30,8 +30,9 @@ _require_scsi_debug > > _require_test > > _require_block_device $TEST_DEV > > > > +size=$(_small_fs_size_mb 256) > > echo "Get a device with 4096 physical sector size and 512 logical sector size" > > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 256` > > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 $size` > > blockdev --getpbsz --getss $SCSI_DEBUG_DEV > > > > echo "mkfs and mount" > > diff --git a/tests/generic/730 b/tests/generic/730 > > index 11308cda..988c47e1 100755 > > --- a/tests/generic/730 > > +++ b/tests/generic/730 > > @@ -27,7 +27,8 @@ _require_test > > _require_block_device $TEST_DEV > > _require_scsi_debug > > > > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 256` > > +size=$(_small_fs_size_mb 256) > > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 $size` > > test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device" > > echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full > > > > diff --git a/tests/generic/731 b/tests/generic/731 > > index e1400d06..b279e3f7 100755 > > --- a/tests/generic/731 > > +++ b/tests/generic/731 > > @@ -27,7 +27,8 @@ _require_block_device $TEST_DEV > > _supported_fs generic > > _require_scsi_debug > > > > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 256` > > +size=$(_small_fs_size_mb 256) > > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 $size` > > test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device" > > echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full > > > > diff --git a/tests/shared/298 b/tests/shared/298 > > index 807d4c87..52bfffb8 100755 > > --- a/tests/shared/298 > > +++ b/tests/shared/298 > > @@ -20,7 +20,7 @@ if [ "$FSTYP" = "btrfs" ]; then > > fssize=3000 > > else > > _require_fs_space $TEST_DIR 307200 > > - fssize=300 > > + fssize=$(_small_fs_size_mb 300) # 200m phys/virt size > > fi > > > > [ "$FSTYP" = "ext4" ] && _require_dumpe2fs > > diff --git a/tests/xfs/279 b/tests/xfs/279 > > index 835d187f..9f366d1e 100755 > > --- a/tests/xfs/279 > > +++ b/tests/xfs/279 > > @@ -26,6 +26,7 @@ _cleanup() > > _supported_fs xfs > > > > _require_scsi_debug > > +size=$(_small_fs_size_mb 128) > > > > # Remove xfs signature so -f isn't needed to re-mkfs > > _wipe_device() > > @@ -55,7 +56,7 @@ _check_mkfs() > > ( > > echo "===================" > > echo "4k physical 512b logical aligned" > > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128` > > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 $size` > > test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device" > > # sector size should default to 4k > > _check_mkfs $SCSI_DEBUG_DEV > > @@ -68,7 +69,7 @@ _put_scsi_debug_dev > > ( > > echo "===================" > > echo "4k physical 512b logical unaligned" > > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 1 128` > > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 1 $size` > > test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device" > > # should fail on misalignment > > _check_mkfs $SCSI_DEBUG_DEV > > @@ -85,7 +86,7 @@ _put_scsi_debug_dev > > ( > > echo "===================" > > echo "hard 4k physical / 4k logical" > > -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 128` > > +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 $size` > > test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device" > > # block size smaller than sector size should fail > > _check_mkfs -b size=2048 $SCSI_DEBUG_DEV > > > > base-commit: 386c7b6aa69ebe8017a4728a994f80d55c660de4 > > -- > > 2.43.0 > > > > >
On Wed, Mar 13, 2024 at 11:16:29PM +0800, Zorro Lang wrote: > On Tue, Feb 27, 2024 at 06:39:45PM +0100, Pankaj Raghav (Samsung) wrote: > > From: "Darrick J. Wong" <djwong@kernel.org> > > > > There's a bunch of tests that fail the formatting step when the test run > > is configured to use XFS with a 64k blocksize. This happens because XFS > > doesn't really support that combination due to minimum log size > > constraints. Fix the test to format larger devices in that case. > > > > Signed-off-by: Darrick J. Wong <djwong@kernel.org> > > Co-developed-by: Pankaj Raghav <p.raghav@samsung.com> > > Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> > > --- > > This change looks good to me, and it really fixes some testing failures. > > Reviewed-by: Zorro Lang <zlang@redhat.com> Thanks. > > BTW, I tested 64k blocksize xfs with this patch, there're still some failed > test cases. If you're still interested in it, I'd like to list some of them > as below (diff *.out *.out.bad output). > I have some more test fixes but it is happening only when we have LBS, i.e, 64k bs on a 4k system. But I had a fix for xfs/558 [1]. Can you see if it fixes it? [1] https://lore.kernel.org/linux-xfs/20240122111751.449762-2-kernel@pankajraghav.com/ > > *xfs/558 failed as:* > > --- /dev/fd/63 2024-03-12 19:13:26.569223817 -0400 > +++ xfs/558.out.bad 2024-03-12 19:13:26.489224254 -0400 > @@ -1,2 +1,3 @@ > QA output created by 558 > +Expected to hear about writeback iomap invalidations? > Silence is golden
diff --git a/common/rc b/common/rc index 30c44ddd..f1a27bcd 100644 --- a/common/rc +++ b/common/rc @@ -923,6 +923,35 @@ _check_minimal_fs_size() fi } +# Round a proposed filesystem size up to the minimium supported size. The +# input is in MB and so is the output. +_small_fs_size_mb() +{ + local size="$1" + local runner_min_size=0 + local fs_min_size=0 + + case "$FSTYP" in + xfs) + # xfs no longer supports filesystems smaller than 600m + fs_min_size=600 + ;; + f2fs) + # f2fs-utils 1.9.0 needs at least 38 MB space for f2fs image. + # However, f2fs-utils 1.14.0 needs at least 52 MB. Not sure if + # it will change again. So just set it 128M. + fs_min_size=128 + ;; + esac + (( size < fs_min_size )) && size="$fs_min_size" + + # If the test runner wanted a minimum size, enforce that here. + test -n "$MIN_FSSIZE" && runner_min_size=$((MIN_FSSIZE / 1048576)) + (( size < runner_min_size)) && size="$runner_min_size" + + echo "$size" +} + # Create fs of certain size on scratch device # _scratch_mkfs_sized <size in bytes> [optional blocksize] _scratch_mkfs_sized() diff --git a/tests/generic/042 b/tests/generic/042 index 5116183f..63a46d6b 100755 --- a/tests/generic/042 +++ b/tests/generic/042 @@ -27,14 +27,7 @@ _crashtest() img=$SCRATCH_MNT/$seq.img mnt=$SCRATCH_MNT/$seq.mnt file=$mnt/file - size=25M - - # f2fs-utils 1.9.0 needs at least 38 MB space for f2fs image. However, - # f2fs-utils 1.14.0 needs at least 52 MB. Not sure if it will change - # again. So just set it 128M. - if [ $FSTYP == "f2fs" ]; then - size=128M - fi + size=$(_small_fs_size_mb 25)M # Create an fs on a small, initialized image. The pattern is written to # the image to detect stale data exposure. diff --git a/tests/generic/081 b/tests/generic/081 index 22ac94de..0996f221 100755 --- a/tests/generic/081 +++ b/tests/generic/081 @@ -62,13 +62,16 @@ snapname=snap_$seq mnt=$TEST_DIR/mnt_$seq mkdir -p $mnt +size=$(_small_fs_size_mb 300) +lvsize=$((size * 85 / 100)) # ~256M + # make sure there's enough disk space for 256M lv, test for 300M here in case # lvm uses some space for metadata -_scratch_mkfs_sized $((300 * 1024 * 1024)) >>$seqres.full 2>&1 +_scratch_mkfs_sized $((size * 1024 * 1024)) >>$seqres.full 2>&1 $LVM_PROG vgcreate -f $vgname $SCRATCH_DEV >>$seqres.full 2>&1 # We use yes pipe instead of 'lvcreate --yes' because old version of lvm # (like 2.02.95 in RHEL6) don't support --yes option -yes | $LVM_PROG lvcreate -L 256M -n $lvname $vgname >>$seqres.full 2>&1 +yes | $LVM_PROG lvcreate -L ${lvsize}M -n $lvname $vgname >>$seqres.full 2>&1 # wait for lvcreation to fully complete $UDEV_SETTLE_PROG >>$seqres.full 2>&1 diff --git a/tests/generic/108 b/tests/generic/108 index efe66ba5..07703fc8 100755 --- a/tests/generic/108 +++ b/tests/generic/108 @@ -44,9 +44,11 @@ vgname=vg_$seq physical=`blockdev --getpbsz $SCRATCH_DEV` logical=`blockdev --getss $SCRATCH_DEV` +size=$(_small_fs_size_mb 300) +lvsize=$((size * 91 / 100)) # _get_scsi_debug_dev returns a scsi debug device with 128M in size by default -SCSI_DEBUG_DEV=`_get_scsi_debug_dev ${physical:-512} ${logical:-512} 0 300` +SCSI_DEBUG_DEV=`_get_scsi_debug_dev ${physical:-512} ${logical:-512} 0 $size` test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device" echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full @@ -55,7 +57,7 @@ $LVM_PROG pvcreate -f $SCSI_DEBUG_DEV $SCRATCH_DEV >>$seqres.full 2>&1 $LVM_PROG vgcreate -f $vgname $SCSI_DEBUG_DEV $SCRATCH_DEV >>$seqres.full 2>&1 # We use yes pipe instead of 'lvcreate --yes' because old version of lvm # (like 2.02.95 in RHEL6) don't support --yes option -yes | $LVM_PROG lvcreate -i 2 -I 4m -L 275m -n $lvname $vgname \ +yes | $LVM_PROG lvcreate -i 2 -I 4m -L ${lvsize}m -n $lvname $vgname \ >>$seqres.full 2>&1 # wait for lv creation to fully complete $UDEV_SETTLE_PROG >>$seqres.full 2>&1 diff --git a/tests/generic/455 b/tests/generic/455 index c13d872c..da803de0 100755 --- a/tests/generic/455 +++ b/tests/generic/455 @@ -51,7 +51,8 @@ SANITY_DIR=$TEST_DIR/fsxtests rm -rf $SANITY_DIR mkdir $SANITY_DIR -devsize=$((1024*1024*200 / 512)) # 200m phys/virt size +size=$(_small_fs_size_mb 200) # 200m phys/virt size +devsize=$((1024*1024*size / 512)) csize=$((1024*64 / 512)) # 64k cluster size lowspace=$((1024*1024 / 512)) # 1m low space threshold diff --git a/tests/generic/457 b/tests/generic/457 index ca0f5e62..03aeb814 100755 --- a/tests/generic/457 +++ b/tests/generic/457 @@ -55,7 +55,8 @@ SANITY_DIR=$TEST_DIR/fsxtests rm -rf $SANITY_DIR mkdir $SANITY_DIR -devsize=$((1024*1024*200 / 512)) # 200m phys/virt size +size=$(_small_fs_size_mb 200) # 200m phys/virt size +devsize=$((1024*1024*size / 512)) csize=$((1024*64 / 512)) # 64k cluster size lowspace=$((1024*1024 / 512)) # 1m low space threshold diff --git a/tests/generic/482 b/tests/generic/482 index 6d8396d9..c647d24c 100755 --- a/tests/generic/482 +++ b/tests/generic/482 @@ -65,7 +65,8 @@ fi fsstress_args=$(_scale_fsstress_args -w -d $SCRATCH_MNT -n 512 -p $nr_cpus \ $FSSTRESS_AVOID) -devsize=$((1024*1024*200 / 512)) # 200m phys/virt size +size=$(_small_fs_size_mb 200) # 200m phys/virt size +devsize=$((1024*1024*size / 512)) csize=$((1024*64 / 512)) # 64k cluster size lowspace=$((1024*1024 / 512)) # 1m low space threshold diff --git a/tests/generic/704 b/tests/generic/704 index c0142a60..6cc4bb4a 100755 --- a/tests/generic/704 +++ b/tests/generic/704 @@ -30,8 +30,9 @@ _require_scsi_debug _require_test _require_block_device $TEST_DEV +size=$(_small_fs_size_mb 256) echo "Get a device with 4096 physical sector size and 512 logical sector size" -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 256` +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 $size` blockdev --getpbsz --getss $SCSI_DEBUG_DEV echo "mkfs and mount" diff --git a/tests/generic/730 b/tests/generic/730 index 11308cda..988c47e1 100755 --- a/tests/generic/730 +++ b/tests/generic/730 @@ -27,7 +27,8 @@ _require_test _require_block_device $TEST_DEV _require_scsi_debug -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 256` +size=$(_small_fs_size_mb 256) +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 $size` test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device" echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full diff --git a/tests/generic/731 b/tests/generic/731 index e1400d06..b279e3f7 100755 --- a/tests/generic/731 +++ b/tests/generic/731 @@ -27,7 +27,8 @@ _require_block_device $TEST_DEV _supported_fs generic _require_scsi_debug -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 256` +size=$(_small_fs_size_mb 256) +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 $size` test -b "$SCSI_DEBUG_DEV" || _notrun "Failed to initialize scsi debug device" echo "SCSI debug device $SCSI_DEBUG_DEV" >>$seqres.full diff --git a/tests/shared/298 b/tests/shared/298 index 807d4c87..52bfffb8 100755 --- a/tests/shared/298 +++ b/tests/shared/298 @@ -20,7 +20,7 @@ if [ "$FSTYP" = "btrfs" ]; then fssize=3000 else _require_fs_space $TEST_DIR 307200 - fssize=300 + fssize=$(_small_fs_size_mb 300) # 200m phys/virt size fi [ "$FSTYP" = "ext4" ] && _require_dumpe2fs diff --git a/tests/xfs/279 b/tests/xfs/279 index 835d187f..9f366d1e 100755 --- a/tests/xfs/279 +++ b/tests/xfs/279 @@ -26,6 +26,7 @@ _cleanup() _supported_fs xfs _require_scsi_debug +size=$(_small_fs_size_mb 128) # Remove xfs signature so -f isn't needed to re-mkfs _wipe_device() @@ -55,7 +56,7 @@ _check_mkfs() ( echo "===================" echo "4k physical 512b logical aligned" -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128` +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 $size` test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device" # sector size should default to 4k _check_mkfs $SCSI_DEBUG_DEV @@ -68,7 +69,7 @@ _put_scsi_debug_dev ( echo "===================" echo "4k physical 512b logical unaligned" -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 1 128` +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 1 $size` test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device" # should fail on misalignment _check_mkfs $SCSI_DEBUG_DEV @@ -85,7 +86,7 @@ _put_scsi_debug_dev ( echo "===================" echo "hard 4k physical / 4k logical" -SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 128` +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 $size` test -b "$SCSI_DEBUG_DEV" || _notrun "Could not get scsi_debug device" # block size smaller than sector size should fail _check_mkfs -b size=2048 $SCSI_DEBUG_DEV