| Message ID | 20240623053900.857695-2-hch@lst.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | xfs: new EOF fragmentation tests | expand |
On Sun, Jun 23, 2024 at 07:38:53AM +0200, Christoph Hellwig wrote: > From: Dave Chinner <dchinner@redhat.com> > > These tests create substantial file fragmentation as a result of > application actions that defeat post-EOF preallocation > optimisations. They are intended to replicate known vectors for > these problems, and provide a check that the fragmentation levels > have been controlled. The mitigations we make may not completely > remove fragmentation (e.g. they may demonstrate speculative delalloc > related extent size growth) so the checks don't assume we'll end up > with perfect layouts and hence check for an exceptable level of > fragmentation rather than none. > > Signed-off-by: Dave Chinner <dchinner@redhat.com> > [move to different test number, update to current xfstest APIs] > Signed-off-by: Christoph Hellwig <hch@lst.de> > --- > tests/xfs/1500 | 59 ++++++++++++++++++++++++++++++++++++++ > tests/xfs/1500.out | 9 ++++++ > tests/xfs/1501 | 61 ++++++++++++++++++++++++++++++++++++++++ > tests/xfs/1501.out | 9 ++++++ > tests/xfs/1502 | 61 ++++++++++++++++++++++++++++++++++++++++ > tests/xfs/1502.out | 9 ++++++ > tests/xfs/1503 | 70 ++++++++++++++++++++++++++++++++++++++++++++++ > tests/xfs/1503.out | 33 ++++++++++++++++++++++ > 8 files changed, 311 insertions(+) > create mode 100755 tests/xfs/1500 > create mode 100644 tests/xfs/1500.out > create mode 100755 tests/xfs/1501 > create mode 100644 tests/xfs/1501.out > create mode 100755 tests/xfs/1502 > create mode 100644 tests/xfs/1502.out > create mode 100755 tests/xfs/1503 > create mode 100644 tests/xfs/1503.out > > diff --git a/tests/xfs/1500 b/tests/xfs/1500 > new file mode 100755 > index 000000000..222e90d6c > --- /dev/null > +++ b/tests/xfs/1500 > @@ -0,0 +1,59 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. ^^^^ Should I keep "2019" or change it to 2024, or no matter :) > +# > +# FS QA Test xfs/500 > +# > +# Post-EOF preallocation defeat test for O_SYNC buffered I/O. > +# > + > +. ./common/preamble > +_begin_fstest auto quick prealloc rw > + > +. ./common/rc > +. ./common/filter > + > +_supported_fs xfs > +_require_scratch > + > +_scratch_mkfs 2>&1 >> $seqres.full Wrong order:) ">>$seqres.full 2>&1" > +_scratch_mount > + > +# Write multiple files in parallel using synchronous buffered writes. Aim is to > +# interleave allocations to fragment the files. Synchronous writes defeat the > +# open/write/close heuristics in xfs_file_release() that prevent EOF block > +# removal, so this should fragment badly. Typical problematic behaviour shows > +# per-file extent counts of >900 (almost worse case) whilst fixed behaviour > +# typically shows extent counts in the low 20s. > +# > +# Failure is determined by golden output mismatch from _within_tolerance(). > + > +workfile=$SCRATCH_MNT/file > +nfiles=8 > +wsize=4096 > +wcnt=1000 > + > +write_sync_file() > +{ > + idx=$1 > + > + for ((cnt=0; cnt<$wcnt; cnt++)); do > + $XFS_IO_PROG -f -s -c "pwrite $((cnt * wsize)) $wsize" $workfile.$idx > + done > +} > + > +rm -f $workfile* > +for ((n=0; n<$nfiles; n++)); do > + write_sync_file $n > /dev/null 2>&1 & > +done > +wait If a case has background process, better to do kill&wait in _cleanup, for unexpected Ctrl^C when fstests is running. e.g. _cleanup{} { # try to kill all background processes wait cd / rm -r -f $tmp.* } I'm not sure if there's a good to way to do "kill all background processes" in this case, or if it's necessary. But a "wait" might be worth, to avoid the "Device Busy" error. Any thoughts? Thanks, Zorro > +sync > + > +for ((n=0; n<$nfiles; n++)); do > + count=$(_count_extents $workfile.$n) > + # Acceptible extent count range is 1-40 > + _within_tolerance "file.$n extent count" $count 21 19 -v > +done > + > +status=0 > +exit > diff --git a/tests/xfs/1500.out b/tests/xfs/1500.out > new file mode 100644 > index 000000000..414df87ed > --- /dev/null > +++ b/tests/xfs/1500.out > @@ -0,0 +1,9 @@ > +QA output created by 1500 > +file.0 extent count is in range > +file.1 extent count is in range > +file.2 extent count is in range > +file.3 extent count is in range > +file.4 extent count is in range > +file.5 extent count is in range > +file.6 extent count is in range > +file.7 extent count is in range > diff --git a/tests/xfs/1501 b/tests/xfs/1501 > new file mode 100755 > index 000000000..beae49bff > --- /dev/null > +++ b/tests/xfs/1501 > @@ -0,0 +1,61 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. > +# > +# FS QA Test xfs/501 > +# > +# Post-EOF preallocation defeat test for buffered I/O with extent size hints. > +# > + > +. ./common/preamble > +_begin_fstest auto quick prealloc rw > + > +. ./common/rc > +. ./common/filter > + > +_supported_fs xfs > +_require_scratch > + > +_scratch_mkfs 2>&1 >> $seqres.full > +_scratch_mount > + > +# Write multiple files in parallel using buffered writes with extent size hints. > +# Aim is to interleave allocations to fragment the files. Writes w/ extent size > +# hints set defeat the open/write/close heuristics in xfs_file_release() that > +# prevent EOF block removal, so this should fragment badly. Typical problematic > +# behaviour shows per-file extent counts of 1000 (worst case!) whilst > +# fixed behaviour should show very few extents (almost best case). > +# > +# Failure is determined by golden output mismatch from _within_tolerance(). > + > +workfile=$SCRATCH_MNT/file > +nfiles=8 > +wsize=4096 > +wcnt=1000 > +extent_size=16m > + > +write_extsz_file() > +{ > + idx=$1 > + > + $XFS_IO_PROG -f -c "extsize $extent_size" $workfile.$idx > + for ((cnt=0; cnt<$wcnt; cnt++)); do > + $XFS_IO_PROG -f -c "pwrite $((cnt * wsize)) $wsize" $workfile.$idx > + done > +} > + > +rm -f $workfile* > +for ((n=0; n<$nfiles; n++)); do > + write_extsz_file $n > /dev/null 2>&1 & > +done > +wait > +sync > + > +for ((n=0; n<$nfiles; n++)); do > + count=$(_count_extents $workfile.$n) > + # Acceptible extent count range is 1-10 > + _within_tolerance "file.$n extent count" $count 2 1 8 -v > +done > + > +status=0 > +exit > diff --git a/tests/xfs/1501.out b/tests/xfs/1501.out > new file mode 100644 > index 000000000..a266ef74b > --- /dev/null > +++ b/tests/xfs/1501.out > @@ -0,0 +1,9 @@ > +QA output created by 1501 > +file.0 extent count is in range > +file.1 extent count is in range > +file.2 extent count is in range > +file.3 extent count is in range > +file.4 extent count is in range > +file.5 extent count is in range > +file.6 extent count is in range > +file.7 extent count is in range > diff --git a/tests/xfs/1502 b/tests/xfs/1502 > new file mode 100755 > index 000000000..9d303ced7 > --- /dev/null > +++ b/tests/xfs/1502 > @@ -0,0 +1,61 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. > +# > +# FS QA Test xfs/502 > +# > +# Post-EOF preallocation defeat test for direct I/O with extent size hints. > +# > + > +. ./common/preamble > +_begin_fstest auto quick prealloc rw > + > +. ./common/rc > +. ./common/filter > + > +_supported_fs xfs > +_require_scratch > + > +_scratch_mkfs 2>&1 >> $seqres.full > +_scratch_mount > + > +# Write multiple files in parallel using O_DIRECT writes w/ extent size hints. > +# Aim is to interleave allocations to fragment the files. O_DIRECT writes defeat > +# the open/write/close heuristics in xfs_file_release() that prevent EOF block > +# removal, so this should fragment badly. Typical problematic behaviour shows > +# per-file extent counts of ~1000 (worst case) whilst fixed behaviour typically > +# shows extent counts in the low single digits (almost best case) > +# > +# Failure is determined by golden output mismatch from _within_tolerance(). > + > +workfile=$SCRATCH_MNT/file > +nfiles=8 > +wsize=4096 > +wcnt=1000 > +extent_size=16m > + > +write_direct_file() > +{ > + idx=$1 > + > + $XFS_IO_PROG -f -c "extsize $extent_size" $workfile.$idx > + for ((cnt=0; cnt<$wcnt; cnt++)); do > + $XFS_IO_PROG -f -d -c "pwrite $((cnt * wsize)) $wsize" $workfile.$idx > + done > +} > + > +rm -f $workfile* > +for ((n=0; n<$nfiles; n++)); do > + write_direct_file $n > /dev/null 2>&1 & > +done > +wait > +sync > + > +for ((n=0; n<$nfiles; n++)); do > + count=$(_count_extents $workfile.$n) > + # Acceptible extent count range is 1-10 > + _within_tolerance "file.$n extent count" $count 2 1 8 -v > +done > + > +status=0 > +exit > diff --git a/tests/xfs/1502.out b/tests/xfs/1502.out > new file mode 100644 > index 000000000..82c8760a3 > --- /dev/null > +++ b/tests/xfs/1502.out > @@ -0,0 +1,9 @@ > +QA output created by 1502 > +file.0 extent count is in range > +file.1 extent count is in range > +file.2 extent count is in range > +file.3 extent count is in range > +file.4 extent count is in range > +file.5 extent count is in range > +file.6 extent count is in range > +file.7 extent count is in range > diff --git a/tests/xfs/1503 b/tests/xfs/1503 > new file mode 100755 > index 000000000..41f4035ad > --- /dev/null > +++ b/tests/xfs/1503 > @@ -0,0 +1,70 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. > +# > +# FS QA Test xfs/503 > +# > +# Post-EOF preallocation defeat test with O_SYNC buffered I/O that repeatedly > +# closes and reopens the files. > +# > + > +. ./common/preamble > +_begin_fstest auto prealloc rw > + > +. ./common/rc > +. ./common/filter > + > +_supported_fs xfs > +_require_scratch > + > +_scratch_mkfs 2>&1 >> $seqres.full > +_scratch_mount > + > +# Write multiple files in parallel using synchronous buffered writes that > +# repeatedly close and reopen the fails. Aim is to interleave allocations to > +# fragment the files. Assuming we've fixed the synchronous write defeat, we can > +# still trigger the same issue with a open/read/close on O_RDONLY files. We > +# should not be triggering EOF preallocation removal on files we don't have > +# permission to write, so until this is fixed it should fragment badly. Typical > +# problematic behaviour shows per-file extent counts of 50-350 whilst fixed > +# behaviour typically demonstrates post-eof speculative delalloc growth in > +# extent size (~6 extents for 50MB file). > +# > +# Failure is determined by golden output mismatch from _within_tolerance(). > + > +workfile=$SCRATCH_MNT/file > +nfiles=32 > +wsize=4096 > +wcnt=1000 > + > +write_file() > +{ > + idx=$1 > + > + $XFS_IO_PROG -f -s -c "pwrite -b 64k 0 50m" $workfile.$idx > +} > + > +read_file() > +{ > + idx=$1 > + > + for ((cnt=0; cnt<$wcnt; cnt++)); do > + $XFS_IO_PROG -f -r -c "pread 0 28" $workfile.$idx > + done > +} > + > +rm -f $workdir/file* > +for ((n=0; n<$((nfiles)); n++)); do > + write_file $n > /dev/null 2>&1 & > + read_file $n > /dev/null 2>&1 & > +done > +wait > + > +for ((n=0; n<$nfiles; n++)); do > + count=$(_count_extents $workfile.$n) > + # Acceptible extent count range is 1-40 > + _within_tolerance "file.$n extent count" $count 6 5 10 -v > +done > + > +status=0 > +exit > diff --git a/tests/xfs/1503.out b/tests/xfs/1503.out > new file mode 100644 > index 000000000..1780b16df > --- /dev/null > +++ b/tests/xfs/1503.out > @@ -0,0 +1,33 @@ > +QA output created by 1503 > +file.0 extent count is in range > +file.1 extent count is in range > +file.2 extent count is in range > +file.3 extent count is in range > +file.4 extent count is in range > +file.5 extent count is in range > +file.6 extent count is in range > +file.7 extent count is in range > +file.8 extent count is in range > +file.9 extent count is in range > +file.10 extent count is in range > +file.11 extent count is in range > +file.12 extent count is in range > +file.13 extent count is in range > +file.14 extent count is in range > +file.15 extent count is in range > +file.16 extent count is in range > +file.17 extent count is in range > +file.18 extent count is in range > +file.19 extent count is in range > +file.20 extent count is in range > +file.21 extent count is in range > +file.22 extent count is in range > +file.23 extent count is in range > +file.24 extent count is in range > +file.25 extent count is in range > +file.26 extent count is in range > +file.27 extent count is in range > +file.28 extent count is in range > +file.29 extent count is in range > +file.30 extent count is in range > +file.31 extent count is in range > -- > 2.43.0 > >
On Sun, Jun 23, 2024 at 09:03:01PM +0800, Zorro Lang wrote: > > +# SPDX-License-Identifier: GPL-2.0 > > +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. > ^^^^ > Should I keep "2019" or change it to 2024, or no matter :) No Red Hat employee has touched this since 2019. And my changes mostly removed boilerplate code, so there isn't much of a point in adding my copyright notice here. > > +_scratch_mkfs 2>&1 >> $seqres.full > > Wrong order:) ">>$seqres.full 2>&1" Ok. > If a case has background process, better to do kill&wait in _cleanup, > for unexpected Ctrl^C when fstests is running. e.g. Ok. > > _cleanup{} > { > # try to kill all background processes > wait > cd / > rm -r -f $tmp.* > } > > I'm not sure if there's a good to way to do "kill all background > processes" in this case, or if it's necessary. But a "wait" might > be worth, to avoid the "Device Busy" error. Any thoughts? No really sure, but I'll play around with a few variants.
diff --git a/tests/xfs/1500 b/tests/xfs/1500 new file mode 100755 index 000000000..222e90d6c --- /dev/null +++ b/tests/xfs/1500 @@ -0,0 +1,59 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test xfs/500 +# +# Post-EOF preallocation defeat test for O_SYNC buffered I/O. +# + +. ./common/preamble +_begin_fstest auto quick prealloc rw + +. ./common/rc +. ./common/filter + +_supported_fs xfs +_require_scratch + +_scratch_mkfs 2>&1 >> $seqres.full +_scratch_mount + +# Write multiple files in parallel using synchronous buffered writes. Aim is to +# interleave allocations to fragment the files. Synchronous writes defeat the +# open/write/close heuristics in xfs_file_release() that prevent EOF block +# removal, so this should fragment badly. Typical problematic behaviour shows +# per-file extent counts of >900 (almost worse case) whilst fixed behaviour +# typically shows extent counts in the low 20s. +# +# Failure is determined by golden output mismatch from _within_tolerance(). + +workfile=$SCRATCH_MNT/file +nfiles=8 +wsize=4096 +wcnt=1000 + +write_sync_file() +{ + idx=$1 + + for ((cnt=0; cnt<$wcnt; cnt++)); do + $XFS_IO_PROG -f -s -c "pwrite $((cnt * wsize)) $wsize" $workfile.$idx + done +} + +rm -f $workfile* +for ((n=0; n<$nfiles; n++)); do + write_sync_file $n > /dev/null 2>&1 & +done +wait +sync + +for ((n=0; n<$nfiles; n++)); do + count=$(_count_extents $workfile.$n) + # Acceptible extent count range is 1-40 + _within_tolerance "file.$n extent count" $count 21 19 -v +done + +status=0 +exit diff --git a/tests/xfs/1500.out b/tests/xfs/1500.out new file mode 100644 index 000000000..414df87ed --- /dev/null +++ b/tests/xfs/1500.out @@ -0,0 +1,9 @@ +QA output created by 1500 +file.0 extent count is in range +file.1 extent count is in range +file.2 extent count is in range +file.3 extent count is in range +file.4 extent count is in range +file.5 extent count is in range +file.6 extent count is in range +file.7 extent count is in range diff --git a/tests/xfs/1501 b/tests/xfs/1501 new file mode 100755 index 000000000..beae49bff --- /dev/null +++ b/tests/xfs/1501 @@ -0,0 +1,61 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test xfs/501 +# +# Post-EOF preallocation defeat test for buffered I/O with extent size hints. +# + +. ./common/preamble +_begin_fstest auto quick prealloc rw + +. ./common/rc +. ./common/filter + +_supported_fs xfs +_require_scratch + +_scratch_mkfs 2>&1 >> $seqres.full +_scratch_mount + +# Write multiple files in parallel using buffered writes with extent size hints. +# Aim is to interleave allocations to fragment the files. Writes w/ extent size +# hints set defeat the open/write/close heuristics in xfs_file_release() that +# prevent EOF block removal, so this should fragment badly. Typical problematic +# behaviour shows per-file extent counts of 1000 (worst case!) whilst +# fixed behaviour should show very few extents (almost best case). +# +# Failure is determined by golden output mismatch from _within_tolerance(). + +workfile=$SCRATCH_MNT/file +nfiles=8 +wsize=4096 +wcnt=1000 +extent_size=16m + +write_extsz_file() +{ + idx=$1 + + $XFS_IO_PROG -f -c "extsize $extent_size" $workfile.$idx + for ((cnt=0; cnt<$wcnt; cnt++)); do + $XFS_IO_PROG -f -c "pwrite $((cnt * wsize)) $wsize" $workfile.$idx + done +} + +rm -f $workfile* +for ((n=0; n<$nfiles; n++)); do + write_extsz_file $n > /dev/null 2>&1 & +done +wait +sync + +for ((n=0; n<$nfiles; n++)); do + count=$(_count_extents $workfile.$n) + # Acceptible extent count range is 1-10 + _within_tolerance "file.$n extent count" $count 2 1 8 -v +done + +status=0 +exit diff --git a/tests/xfs/1501.out b/tests/xfs/1501.out new file mode 100644 index 000000000..a266ef74b --- /dev/null +++ b/tests/xfs/1501.out @@ -0,0 +1,9 @@ +QA output created by 1501 +file.0 extent count is in range +file.1 extent count is in range +file.2 extent count is in range +file.3 extent count is in range +file.4 extent count is in range +file.5 extent count is in range +file.6 extent count is in range +file.7 extent count is in range diff --git a/tests/xfs/1502 b/tests/xfs/1502 new file mode 100755 index 000000000..9d303ced7 --- /dev/null +++ b/tests/xfs/1502 @@ -0,0 +1,61 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test xfs/502 +# +# Post-EOF preallocation defeat test for direct I/O with extent size hints. +# + +. ./common/preamble +_begin_fstest auto quick prealloc rw + +. ./common/rc +. ./common/filter + +_supported_fs xfs +_require_scratch + +_scratch_mkfs 2>&1 >> $seqres.full +_scratch_mount + +# Write multiple files in parallel using O_DIRECT writes w/ extent size hints. +# Aim is to interleave allocations to fragment the files. O_DIRECT writes defeat +# the open/write/close heuristics in xfs_file_release() that prevent EOF block +# removal, so this should fragment badly. Typical problematic behaviour shows +# per-file extent counts of ~1000 (worst case) whilst fixed behaviour typically +# shows extent counts in the low single digits (almost best case) +# +# Failure is determined by golden output mismatch from _within_tolerance(). + +workfile=$SCRATCH_MNT/file +nfiles=8 +wsize=4096 +wcnt=1000 +extent_size=16m + +write_direct_file() +{ + idx=$1 + + $XFS_IO_PROG -f -c "extsize $extent_size" $workfile.$idx + for ((cnt=0; cnt<$wcnt; cnt++)); do + $XFS_IO_PROG -f -d -c "pwrite $((cnt * wsize)) $wsize" $workfile.$idx + done +} + +rm -f $workfile* +for ((n=0; n<$nfiles; n++)); do + write_direct_file $n > /dev/null 2>&1 & +done +wait +sync + +for ((n=0; n<$nfiles; n++)); do + count=$(_count_extents $workfile.$n) + # Acceptible extent count range is 1-10 + _within_tolerance "file.$n extent count" $count 2 1 8 -v +done + +status=0 +exit diff --git a/tests/xfs/1502.out b/tests/xfs/1502.out new file mode 100644 index 000000000..82c8760a3 --- /dev/null +++ b/tests/xfs/1502.out @@ -0,0 +1,9 @@ +QA output created by 1502 +file.0 extent count is in range +file.1 extent count is in range +file.2 extent count is in range +file.3 extent count is in range +file.4 extent count is in range +file.5 extent count is in range +file.6 extent count is in range +file.7 extent count is in range diff --git a/tests/xfs/1503 b/tests/xfs/1503 new file mode 100755 index 000000000..41f4035ad --- /dev/null +++ b/tests/xfs/1503 @@ -0,0 +1,70 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test xfs/503 +# +# Post-EOF preallocation defeat test with O_SYNC buffered I/O that repeatedly +# closes and reopens the files. +# + +. ./common/preamble +_begin_fstest auto prealloc rw + +. ./common/rc +. ./common/filter + +_supported_fs xfs +_require_scratch + +_scratch_mkfs 2>&1 >> $seqres.full +_scratch_mount + +# Write multiple files in parallel using synchronous buffered writes that +# repeatedly close and reopen the fails. Aim is to interleave allocations to +# fragment the files. Assuming we've fixed the synchronous write defeat, we can +# still trigger the same issue with a open/read/close on O_RDONLY files. We +# should not be triggering EOF preallocation removal on files we don't have +# permission to write, so until this is fixed it should fragment badly. Typical +# problematic behaviour shows per-file extent counts of 50-350 whilst fixed +# behaviour typically demonstrates post-eof speculative delalloc growth in +# extent size (~6 extents for 50MB file). +# +# Failure is determined by golden output mismatch from _within_tolerance(). + +workfile=$SCRATCH_MNT/file +nfiles=32 +wsize=4096 +wcnt=1000 + +write_file() +{ + idx=$1 + + $XFS_IO_PROG -f -s -c "pwrite -b 64k 0 50m" $workfile.$idx +} + +read_file() +{ + idx=$1 + + for ((cnt=0; cnt<$wcnt; cnt++)); do + $XFS_IO_PROG -f -r -c "pread 0 28" $workfile.$idx + done +} + +rm -f $workdir/file* +for ((n=0; n<$((nfiles)); n++)); do + write_file $n > /dev/null 2>&1 & + read_file $n > /dev/null 2>&1 & +done +wait + +for ((n=0; n<$nfiles; n++)); do + count=$(_count_extents $workfile.$n) + # Acceptible extent count range is 1-40 + _within_tolerance "file.$n extent count" $count 6 5 10 -v +done + +status=0 +exit diff --git a/tests/xfs/1503.out b/tests/xfs/1503.out new file mode 100644 index 000000000..1780b16df --- /dev/null +++ b/tests/xfs/1503.out @@ -0,0 +1,33 @@ +QA output created by 1503 +file.0 extent count is in range +file.1 extent count is in range +file.2 extent count is in range +file.3 extent count is in range +file.4 extent count is in range +file.5 extent count is in range +file.6 extent count is in range +file.7 extent count is in range +file.8 extent count is in range +file.9 extent count is in range +file.10 extent count is in range +file.11 extent count is in range +file.12 extent count is in range +file.13 extent count is in range +file.14 extent count is in range +file.15 extent count is in range +file.16 extent count is in range +file.17 extent count is in range +file.18 extent count is in range +file.19 extent count is in range +file.20 extent count is in range +file.21 extent count is in range +file.22 extent count is in range +file.23 extent count is in range +file.24 extent count is in range +file.25 extent count is in range +file.26 extent count is in range +file.27 extent count is in range +file.28 extent count is in range +file.29 extent count is in range +file.30 extent count is in range +file.31 extent count is in range