new file mode 100755
@@ -0,0 +1,198 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 SUSE Linux Products GmbH. All Rights Reserved.
+#
+# FSQA Test No. 238
+#
+# Test a particular scenario where we fsync a directory, then move one of its
+# children directories into another directory and then finally sync the log
+# trees by fsyncing any other inode. We want to check that after a power failure
+# we are able to mount the filesystem and that the moved directory exists only
+# as a child of the directory we moved it into.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ _cleanup_flakey
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/dmflakey
+
+# real QA test starts here
+_supported_fs btrfs
+_require_scratch
+_require_dm_target flakey
+
+rm -f $seqres.full
+
+# The test requires a very specific layout of keys and items in the fs/subvolume
+# btree to trigger a bug. So we want to make sure that on whatever platform we
+# are, we have the same leaf/node size.
+#
+# Currently in btrfs the node/leaf size can not be smaller than the page
+# size (but it can be greater than the page size). So use the largest
+# supported node/leaf size (64K).
+#
+_scratch_mkfs "-n 65536" >>$seqres.full 2>&1
+_require_metadata_journaling $SCRATCH_DEV
+_init_flakey
+_mount_flakey
+
+# "testdir" is inode 257.
+mkdir $SCRATCH_MNT/testdir
+chmod 755 $SCRATCH_MNT/testdir
+
+# Create several empty files to have the directory "testdir" with its items
+# spread over several leaves (7 in this case).
+for ((i = 1; i <= 1200; i++)); do
+ echo -n > $SCRATCH_MNT/testdir/file$i
+done
+
+# Create our test directory "dira", inode number 1458, which gets all its items
+# in leaf 7.
+#
+# The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to the entry
+# named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY item that points to
+# that entry is in leaf 3.
+#
+# For this particular filesystem node size (64K), file count and file names, we
+# endup with the directory entry items from inode 257 in leaves 2 and 3, as
+# previously mentioned - what matters for triggering the bug exercised by this
+# test case is that those items are not placed in leaf 1, they must be placed in
+# a leaf different from the one containing the inode item for inode 257.
+#
+# The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for the
+# parent inode (257) are the following:
+#
+# item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34
+# location key (1458 INODE_ITEM 0) type DIR
+# transid 6 data_len 0 name_len 4
+# name: dira
+#
+# and:
+#
+# item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34
+# location key (1458 INODE_ITEM 0) type DIR
+# transid 6 data_len 0 name_len 4
+# name: dira
+#
+mkdir $SCRATCH_MNT/testdir/dira
+
+# Make sure everything done so far is durably persisted.
+sync
+
+# Now do a change to inode 257 ("testdir") that does not result in COWing leaves
+# 2 and 3 - the leaves that contain the directory items pointing to inode 1458
+# (directory "dira").
+#
+# Changing permissions, the owner/group, updating or adding a xattr, etc, will
+# not change (COW) leaves 2 and 3. So for the sake of simplicity change the
+# permissions of inode 257, which results in updating its inode item and
+# therefore change (COW) only leaf 1.
+#
+chmod 700 $SCRATCH_MNT/testdir
+
+# Now fsync directory inode 257.
+#
+# Since only the first leaf was changed/COWed, we log the inode item of inode 257
+# and only the entries found in the first leaf, all with a key of type
+# BTRFS_DIR_ITEM_KEY, and no keys of type BTRFS_DIR_INDEX_KEY, because they sort
+# after the former type and none exist in the first leaf.
+#
+# We also log 3 items that represent ranges for dir items and dir indexes for
+# which the log is authoritative:
+#
+# 1) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
+# authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset in the
+# range [0, 2285968570] (the offset here is the crc32c of the dentry's
+# name). The value 2285968570 corresponds to the offset of the first key
+# of leaf 2 (which is of type BTRFS_DIR_ITEM_KEY);
+#
+# 2) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
+# authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset in the
+# range [4293818216, (u64)-1] (the offset here is the crc32c of the dentry's
+# name). The value 4293818216 corresponds to the offset of the highest key
+# of type BTRFS_DIR_ITEM_KEY plus 1 (4293818215 + 1), which is located in
+# leaf 2;
+#
+# 3) a key of type BTRFS_DIR_LOG_INDEX_KEY, with an offset of 1203, which
+# indicates the log is authoritative for all keys of type BTRFS_DIR_INDEX_KEY
+# that have an offset in the range [1203, (u64)-1]. The value 1203 corresponds
+# to the offset of the last key of type BTRFS_DIR_INDEX_KEY plus 1 (1202 + 1),
+# which is located in leaf 3;
+#
+# Also, because "testdir" is a directory and inode 1458 ("dira") is a child
+# directory, we log inode 1458 too.
+#
+$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir
+
+# Now move "dira", inode 1458, to be a child of the root directory (inode 256).
+#
+# Because this inode was previously logged, when "testdir" was fsynced, the
+# log is updated so that the old inode reference, referring to inode 257 as
+# the parent, is deleted and the new inode reference, referring to inode 256
+# as the parent, is added to the log.
+#
+mv $SCRATCH_MNT/testdir/dira $SCRATCH_MNT/
+
+# Now change some file and fsync it. This guarantees the log changes made by
+# the previous move/rename operation are persisted. We do not need to do any
+# special modification to the file, just any change to any file and sync the
+# log.
+$XFS_IO_PROG -c "pwrite -S 0xab 0 64K" \
+ -c "fsync" \
+ $SCRATCH_MNT/testdir/file1 >>$seqres.full
+
+# Simulate a power failure and then mount again the filesystem to replay the log
+# tree. We want to verify that we are able to mount the filesystem, meaning log
+# replay was successful, and that directory inode 1458 ("dira") only has inode
+# 256 (the filesystem's root) as its parent (and no longer a child of inode 257).
+#
+# It used to happen that during log replay we would end up having inode 1458
+# (directory "dira") with 2 hard links, being a child of inode 257 ("testdir")
+# and inode 256 (the filesystem's root). This resulted in the tree checker
+# detecting the issue and causing the mount operation to fail (with -EIO).
+#
+# This happened because in the log we have the new name/parent for inode 1458,
+# which results in adding the new dentry with inode 256 as the parent, but the
+# previous dentry, under inode 257 was never removed - this is because the
+# ranges for dir items and dir indexes of inode 257 for which the log is
+# authoritative do not include the old dir item and dir index for the dentry
+# of inode 257 referring to inode 1458:
+#
+# - for dir items, the log is authoritative for the ranges [0, 2285968570] and
+# [4293818216, (u64)-1]. The dir item at inode 257 pointing to inode 1458 has
+# a key of (257 DIR_ITEM 3724298081), as previously mentioned, so the dir item
+# is not deleted when the log replay procedure processes the authoritative
+# ranges, as 3724298081 is outside both ranges;
+#
+# - for dir indexes, the log is authoritative for the range [1203, (u64)-1], and
+# the dir index item of inode 257 pointing to inode 1458 has a key of
+# (257 DIR_INDEX 1202), as previously mentioned, so the dir index item is not
+# deleted when the log replay procedure processes the authoritative range.
+#
+_flakey_drop_and_remount
+
+[ -d $SCRATCH_MNT/testdir/dira ] && echo "/testdir/dira still exists"
+[ -d $SCRATCH_MNT/dira ] || echo "/dira does not exists"
+
+# While at it also check that the data we wrote was not lost, just for the sake
+# of completeness.
+echo "File $SCRATCH_MNT/testdir/file1 data:" | _filter_scratch
+od -A d -t x1 $SCRATCH_MNT/testdir/file1
+
+_unmount_flakey
+
+status=0
+exit
new file mode 100644
@@ -0,0 +1,5 @@
+QA output created by 238
+File SCRATCH_MNT/testdir/file1 data:
+0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
+*
+0065536
@@ -240,3 +240,4 @@
235 auto quick send
236 auto quick log
237 auto quick zone balance
+238 auto quick log