| Message ID | 4b3bc104222cba372115d6e249da555f7fbe528b.1732599868.git.nirjhar@linux.ibm.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Addition of new tests for extsize hints | expand |
Looks good:
Reviewed-by: Christoph Hellwig <hch@lst.de>
On Tue, Nov 26, 2024 at 11:24:08AM +0530, Nirjhar Roy wrote: > This commit adds new tests that checks the behaviour of xfs/ext4 > filesystems when extsize hint is set on file with inode size as 0, > non-empty files with allocated and delalloc extents and so on. > Although currently this test is placed under tests/generic, it > only runs on xfs and there is an ongoing patch series[1] to > enable extsize hints for ext4 as well. > > [1] https://lore.kernel.org/linux-ext4/cover.1726034272.git.ojaswin@linux.ibm.com/ > > Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> > Reviewed-by Ritesh Harjani (IBM) <ritesh.list@gmail.com> > Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> > Suggested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> > Signed-off-by: Nirjhar Roy <nirjhar@linux.ibm.com> > --- > tests/generic/367 | 175 ++++++++++++++++++++++++++++++++++++++++++ > tests/generic/367.out | 26 +++++++ > 2 files changed, 201 insertions(+) > create mode 100755 tests/generic/367 > create mode 100644 tests/generic/367.out > > diff --git a/tests/generic/367 b/tests/generic/367 > new file mode 100755 > index 00000000..25d23f42 > --- /dev/null > +++ b/tests/generic/367 > @@ -0,0 +1,175 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2024 Nirjhar Roy (nirjhar@linux.ibm.com). All Rights Reserved. > +# > +# FS QA Test 366 s/366/367/ ./tools/mvtest is your friend. > +# > +# This test verifies that extent allocation hint setting works correctly on > +# files with no extents allocated and non-empty files which are truncated. > +# It also checks that the extent hints setting fails with non-empty file > +# i.e, with any file with allocated extents or delayed allocation. We also > +# check if the extsize value and the xflag bit actually got reflected after > +# setting/re-setting the extsize value. > + > +. ./common/config > +. ./common/filter > +. ./common/preamble > + > +_begin_fstest ioctl quick > + > +_fixed_by_kernel_commit "2a492ff66673 \ > + xfs: Check for delayed allocations before setting \ > + extsize" The commit id should be the second parameter and the subject line the third parameter. _fixed_by_kernel_commit 2a492ff66673 \ "xfs: Check for delayed allocations before setting extsize" With those fixed, Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> --D > + > +_require_scratch_extsize > + > +FILE_DATA_SIZE=1M > + > +get_default_extsize() > +{ > + if [ -z $1 ] || [ ! -d $1 ]; then > + echo "Missing mount point argument for get_default_extsize" > + exit 1 > + fi > + $XFS_IO_PROG -c "extsize" "$1" | sed 's/^\[\([0-9]\+\)\].*/\1/' > +} > + > +filter_extsz() > +{ > + sed "s/\[$1\]/\[EXTSIZE\]/g" > +} > + > +setup() > +{ > + _scratch_mkfs >> "$seqres.full" 2>&1 > + _scratch_mount >> "$seqres.full" 2>&1 > + BLKSZ=`_get_block_size $SCRATCH_MNT` > + DEFAULT_EXTSIZE=`get_default_extsize $SCRATCH_MNT` > + EXTSIZE=$(( BLKSZ*2 )) > + # Make sure the new extsize is not the same as the default > + # extsize so that we can observe it changing > + [[ "$DEFAULT_EXTSIZE" -eq "$EXTSIZE" ]] && EXTSIZE=$(( BLKSZ*4 )) > +} > + > +read_file_extsize() > +{ > + $XFS_IO_PROG -c "extsize" $1 | _filter_scratch | filter_extsz $2 > +} > + > +check_extsz_and_xflag() > +{ > + local filename=$1 > + local extsize=$2 > + read_file_extsize $filename $extsize > + _test_fsxattr_xflag $filename "extsize" && echo "e flag set" || \ > + echo "e flag unset" > +} > + > +check_extsz_xflag_across_remount() > +{ > + local filename=$1 > + local extsize=$2 > + _scratch_cycle_mount > + check_extsz_and_xflag $filename $extsize > +} > + > +# Extsize flag should be cleared when extsize is reset, so this function > +# checks that this behavior is followed. > +reset_extsz_and_recheck_extsz_xflag() > +{ > + local filename=$1 > + echo "Re-setting extsize hint to 0" > + $XFS_IO_PROG -c "extsize 0" $filename > + check_extsz_xflag_across_remount $filename "0" > +} > + > +check_extsz_xflag_before_and_after_reset() > +{ > + local filename=$1 > + local extsize=$2 > + check_extsz_xflag_across_remount $filename $extsize > + reset_extsz_and_recheck_extsz_xflag $filename > +} > + > +test_empty_file() > +{ > + echo "TEST: Set extsize on empty file" > + local filename=$1 > + $XFS_IO_PROG \ > + -c "open -f $filename" \ > + -c "extsize $EXTSIZE" \ > + > + check_extsz_xflag_before_and_after_reset $filename $EXTSIZE > + echo > +} > + > +test_data_delayed() > +{ > + echo "TEST: Set extsize on non-empty file with delayed allocation" > + local filename=$1 > + $XFS_IO_PROG \ > + -c "open -f $filename" \ > + -c "pwrite -q 0 $FILE_DATA_SIZE" \ > + -c "extsize $EXTSIZE" | _filter_scratch > + > + echo "test for default extsize setting if any" > + read_file_extsize $filename $DEFAULT_EXTSIZE > + echo > +} > + > +test_data_allocated() > +{ > + echo "TEST: Set extsize on non-empty file with allocated extents" > + local filename=$1 > + $XFS_IO_PROG \ > + -c "open -f $filename" \ > + -c "pwrite -qW 0 $FILE_DATA_SIZE" \ > + -c "extsize $EXTSIZE" | _filter_scratch > + > + echo "test for default extsize setting if any" > + read_file_extsize $filename $DEFAULT_EXTSIZE > + echo > +} > + > +test_truncate_allocated() > +{ > + echo "TEST: Set extsize after truncating a file with allocated extents" > + local filename=$1 > + $XFS_IO_PROG \ > + -c "open -f $filename" \ > + -c "pwrite -qW 0 $FILE_DATA_SIZE" \ > + -c "truncate 0" \ > + -c "extsize $EXTSIZE" \ > + > + check_extsz_xflag_across_remount $filename $EXTSIZE > + echo > +} > + > +test_truncate_delayed() > +{ > + echo "TEST: Set extsize after truncating a file with delayed allocation" > + local filename=$1 > + $XFS_IO_PROG \ > + -c "open -f $filename" \ > + -c "pwrite -q 0 $FILE_DATA_SIZE" \ > + -c "truncate 0" \ > + -c "extsize $EXTSIZE" \ > + > + check_extsz_xflag_across_remount $filename $EXTSIZE > + echo > +} > + > +setup > +echo -e "EXTSIZE = $EXTSIZE DEFAULT_EXTSIZE = $DEFAULT_EXTSIZE \ > + BLOCKSIZE = $BLKSZ\n" >> "$seqres.full" > + > +NEW_FILE_NAME_PREFIX=$SCRATCH_MNT/new-file- > + > +test_empty_file "$NEW_FILE_NAME_PREFIX"00 > +test_data_delayed "$NEW_FILE_NAME_PREFIX"01 > +test_data_allocated "$NEW_FILE_NAME_PREFIX"02 > +test_truncate_allocated "$NEW_FILE_NAME_PREFIX"03 > +test_truncate_delayed "$NEW_FILE_NAME_PREFIX"04 > + > +status=0 > +exit > diff --git a/tests/generic/367.out b/tests/generic/367.out > new file mode 100644 > index 00000000..f94e8545 > --- /dev/null > +++ b/tests/generic/367.out > @@ -0,0 +1,26 @@ > +QA output created by 367 > +TEST: Set extsize on empty file > +[EXTSIZE] SCRATCH_MNT/new-file-00 > +e flag set > +Re-setting extsize hint to 0 > +[EXTSIZE] SCRATCH_MNT/new-file-00 > +e flag unset > + > +TEST: Set extsize on non-empty file with delayed allocation > +xfs_io: FS_IOC_FSSETXATTR SCRATCH_MNT/new-file-01: Invalid argument > +test for default extsize setting if any > +[EXTSIZE] SCRATCH_MNT/new-file-01 > + > +TEST: Set extsize on non-empty file with allocated extents > +xfs_io: FS_IOC_FSSETXATTR SCRATCH_MNT/new-file-02: Invalid argument > +test for default extsize setting if any > +[EXTSIZE] SCRATCH_MNT/new-file-02 > + > +TEST: Set extsize after truncating a file with allocated extents > +[EXTSIZE] SCRATCH_MNT/new-file-03 > +e flag set > + > +TEST: Set extsize after truncating a file with delayed allocation > +[EXTSIZE] SCRATCH_MNT/new-file-04 > +e flag set > + > -- > 2.43.5 > >
On 11/26/24 11:58, Christoph Hellwig wrote: > Looks good: > > Reviewed-by: Christoph Hellwig <hch@lst.de> > Thank you. --NR
On 11/27/24 06:25, Darrick J. Wong wrote: > On Tue, Nov 26, 2024 at 11:24:08AM +0530, Nirjhar Roy wrote: >> This commit adds new tests that checks the behaviour of xfs/ext4 >> filesystems when extsize hint is set on file with inode size as 0, >> non-empty files with allocated and delalloc extents and so on. >> Although currently this test is placed under tests/generic, it >> only runs on xfs and there is an ongoing patch series[1] to >> enable extsize hints for ext4 as well. >> >> [1] https://lore.kernel.org/linux-ext4/cover.1726034272.git.ojaswin@linux.ibm.com/ >> >> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> >> Reviewed-by Ritesh Harjani (IBM) <ritesh.list@gmail.com> >> Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> >> Suggested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> >> Signed-off-by: Nirjhar Roy <nirjhar@linux.ibm.com> >> --- >> tests/generic/367 | 175 ++++++++++++++++++++++++++++++++++++++++++ >> tests/generic/367.out | 26 +++++++ >> 2 files changed, 201 insertions(+) >> create mode 100755 tests/generic/367 >> create mode 100644 tests/generic/367.out >> >> diff --git a/tests/generic/367 b/tests/generic/367 >> new file mode 100755 >> index 00000000..25d23f42 >> --- /dev/null >> +++ b/tests/generic/367 >> @@ -0,0 +1,175 @@ >> +#! /bin/bash >> +# SPDX-License-Identifier: GPL-2.0 >> +# Copyright (c) 2024 Nirjhar Roy (nirjhar@linux.ibm.com). All Rights Reserved. >> +# >> +# FS QA Test 366 > s/366/367/ > > ./tools/mvtest is your friend. Noted. > >> +# >> +# This test verifies that extent allocation hint setting works correctly on >> +# files with no extents allocated and non-empty files which are truncated. >> +# It also checks that the extent hints setting fails with non-empty file >> +# i.e, with any file with allocated extents or delayed allocation. We also >> +# check if the extsize value and the xflag bit actually got reflected after >> +# setting/re-setting the extsize value. >> + >> +. ./common/config >> +. ./common/filter >> +. ./common/preamble >> + >> +_begin_fstest ioctl quick >> + >> +_fixed_by_kernel_commit "2a492ff66673 \ >> + xfs: Check for delayed allocations before setting \ >> + extsize" > The commit id should be the second parameter and the subject line the > third parameter. > > _fixed_by_kernel_commit 2a492ff66673 \ > "xfs: Check for delayed allocations before setting extsize" > > With those fixed, > Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> > > --D Noted. > >> + >> +_require_scratch_extsize >> + >> +FILE_DATA_SIZE=1M >> + >> +get_default_extsize() >> +{ >> + if [ -z $1 ] || [ ! -d $1 ]; then >> + echo "Missing mount point argument for get_default_extsize" >> + exit 1 >> + fi >> + $XFS_IO_PROG -c "extsize" "$1" | sed 's/^\[\([0-9]\+\)\].*/\1/' >> +} >> + >> +filter_extsz() >> +{ >> + sed "s/\[$1\]/\[EXTSIZE\]/g" >> +} >> + >> +setup() >> +{ >> + _scratch_mkfs >> "$seqres.full" 2>&1 >> + _scratch_mount >> "$seqres.full" 2>&1 >> + BLKSZ=`_get_block_size $SCRATCH_MNT` >> + DEFAULT_EXTSIZE=`get_default_extsize $SCRATCH_MNT` >> + EXTSIZE=$(( BLKSZ*2 )) >> + # Make sure the new extsize is not the same as the default >> + # extsize so that we can observe it changing >> + [[ "$DEFAULT_EXTSIZE" -eq "$EXTSIZE" ]] && EXTSIZE=$(( BLKSZ*4 )) >> +} >> + >> +read_file_extsize() >> +{ >> + $XFS_IO_PROG -c "extsize" $1 | _filter_scratch | filter_extsz $2 >> +} >> + >> +check_extsz_and_xflag() >> +{ >> + local filename=$1 >> + local extsize=$2 >> + read_file_extsize $filename $extsize >> + _test_fsxattr_xflag $filename "extsize" && echo "e flag set" || \ >> + echo "e flag unset" >> +} >> + >> +check_extsz_xflag_across_remount() >> +{ >> + local filename=$1 >> + local extsize=$2 >> + _scratch_cycle_mount >> + check_extsz_and_xflag $filename $extsize >> +} >> + >> +# Extsize flag should be cleared when extsize is reset, so this function >> +# checks that this behavior is followed. >> +reset_extsz_and_recheck_extsz_xflag() >> +{ >> + local filename=$1 >> + echo "Re-setting extsize hint to 0" >> + $XFS_IO_PROG -c "extsize 0" $filename >> + check_extsz_xflag_across_remount $filename "0" >> +} >> + >> +check_extsz_xflag_before_and_after_reset() >> +{ >> + local filename=$1 >> + local extsize=$2 >> + check_extsz_xflag_across_remount $filename $extsize >> + reset_extsz_and_recheck_extsz_xflag $filename >> +} >> + >> +test_empty_file() >> +{ >> + echo "TEST: Set extsize on empty file" >> + local filename=$1 >> + $XFS_IO_PROG \ >> + -c "open -f $filename" \ >> + -c "extsize $EXTSIZE" \ >> + >> + check_extsz_xflag_before_and_after_reset $filename $EXTSIZE >> + echo >> +} >> + >> +test_data_delayed() >> +{ >> + echo "TEST: Set extsize on non-empty file with delayed allocation" >> + local filename=$1 >> + $XFS_IO_PROG \ >> + -c "open -f $filename" \ >> + -c "pwrite -q 0 $FILE_DATA_SIZE" \ >> + -c "extsize $EXTSIZE" | _filter_scratch >> + >> + echo "test for default extsize setting if any" >> + read_file_extsize $filename $DEFAULT_EXTSIZE >> + echo >> +} >> + >> +test_data_allocated() >> +{ >> + echo "TEST: Set extsize on non-empty file with allocated extents" >> + local filename=$1 >> + $XFS_IO_PROG \ >> + -c "open -f $filename" \ >> + -c "pwrite -qW 0 $FILE_DATA_SIZE" \ >> + -c "extsize $EXTSIZE" | _filter_scratch >> + >> + echo "test for default extsize setting if any" >> + read_file_extsize $filename $DEFAULT_EXTSIZE >> + echo >> +} >> + >> +test_truncate_allocated() >> +{ >> + echo "TEST: Set extsize after truncating a file with allocated extents" >> + local filename=$1 >> + $XFS_IO_PROG \ >> + -c "open -f $filename" \ >> + -c "pwrite -qW 0 $FILE_DATA_SIZE" \ >> + -c "truncate 0" \ >> + -c "extsize $EXTSIZE" \ >> + >> + check_extsz_xflag_across_remount $filename $EXTSIZE >> + echo >> +} >> + >> +test_truncate_delayed() >> +{ >> + echo "TEST: Set extsize after truncating a file with delayed allocation" >> + local filename=$1 >> + $XFS_IO_PROG \ >> + -c "open -f $filename" \ >> + -c "pwrite -q 0 $FILE_DATA_SIZE" \ >> + -c "truncate 0" \ >> + -c "extsize $EXTSIZE" \ >> + >> + check_extsz_xflag_across_remount $filename $EXTSIZE >> + echo >> +} >> + >> +setup >> +echo -e "EXTSIZE = $EXTSIZE DEFAULT_EXTSIZE = $DEFAULT_EXTSIZE \ >> + BLOCKSIZE = $BLKSZ\n" >> "$seqres.full" >> + >> +NEW_FILE_NAME_PREFIX=$SCRATCH_MNT/new-file- >> + >> +test_empty_file "$NEW_FILE_NAME_PREFIX"00 >> +test_data_delayed "$NEW_FILE_NAME_PREFIX"01 >> +test_data_allocated "$NEW_FILE_NAME_PREFIX"02 >> +test_truncate_allocated "$NEW_FILE_NAME_PREFIX"03 >> +test_truncate_delayed "$NEW_FILE_NAME_PREFIX"04 >> + >> +status=0 >> +exit >> diff --git a/tests/generic/367.out b/tests/generic/367.out >> new file mode 100644 >> index 00000000..f94e8545 >> --- /dev/null >> +++ b/tests/generic/367.out >> @@ -0,0 +1,26 @@ >> +QA output created by 367 >> +TEST: Set extsize on empty file >> +[EXTSIZE] SCRATCH_MNT/new-file-00 >> +e flag set >> +Re-setting extsize hint to 0 >> +[EXTSIZE] SCRATCH_MNT/new-file-00 >> +e flag unset >> + >> +TEST: Set extsize on non-empty file with delayed allocation >> +xfs_io: FS_IOC_FSSETXATTR SCRATCH_MNT/new-file-01: Invalid argument >> +test for default extsize setting if any >> +[EXTSIZE] SCRATCH_MNT/new-file-01 >> + >> +TEST: Set extsize on non-empty file with allocated extents >> +xfs_io: FS_IOC_FSSETXATTR SCRATCH_MNT/new-file-02: Invalid argument >> +test for default extsize setting if any >> +[EXTSIZE] SCRATCH_MNT/new-file-02 >> + >> +TEST: Set extsize after truncating a file with allocated extents >> +[EXTSIZE] SCRATCH_MNT/new-file-03 >> +e flag set >> + >> +TEST: Set extsize after truncating a file with delayed allocation >> +[EXTSIZE] SCRATCH_MNT/new-file-04 >> +e flag set >> + >> -- >> 2.43.5 >> >>
diff --git a/tests/generic/367 b/tests/generic/367 new file mode 100755 index 00000000..25d23f42 --- /dev/null +++ b/tests/generic/367 @@ -0,0 +1,175 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2024 Nirjhar Roy (nirjhar@linux.ibm.com). All Rights Reserved. +# +# FS QA Test 366 +# +# This test verifies that extent allocation hint setting works correctly on +# files with no extents allocated and non-empty files which are truncated. +# It also checks that the extent hints setting fails with non-empty file +# i.e, with any file with allocated extents or delayed allocation. We also +# check if the extsize value and the xflag bit actually got reflected after +# setting/re-setting the extsize value. + +. ./common/config +. ./common/filter +. ./common/preamble + +_begin_fstest ioctl quick + +_fixed_by_kernel_commit "2a492ff66673 \ + xfs: Check for delayed allocations before setting \ + extsize" + +_require_scratch_extsize + +FILE_DATA_SIZE=1M + +get_default_extsize() +{ + if [ -z $1 ] || [ ! -d $1 ]; then + echo "Missing mount point argument for get_default_extsize" + exit 1 + fi + $XFS_IO_PROG -c "extsize" "$1" | sed 's/^\[\([0-9]\+\)\].*/\1/' +} + +filter_extsz() +{ + sed "s/\[$1\]/\[EXTSIZE\]/g" +} + +setup() +{ + _scratch_mkfs >> "$seqres.full" 2>&1 + _scratch_mount >> "$seqres.full" 2>&1 + BLKSZ=`_get_block_size $SCRATCH_MNT` + DEFAULT_EXTSIZE=`get_default_extsize $SCRATCH_MNT` + EXTSIZE=$(( BLKSZ*2 )) + # Make sure the new extsize is not the same as the default + # extsize so that we can observe it changing + [[ "$DEFAULT_EXTSIZE" -eq "$EXTSIZE" ]] && EXTSIZE=$(( BLKSZ*4 )) +} + +read_file_extsize() +{ + $XFS_IO_PROG -c "extsize" $1 | _filter_scratch | filter_extsz $2 +} + +check_extsz_and_xflag() +{ + local filename=$1 + local extsize=$2 + read_file_extsize $filename $extsize + _test_fsxattr_xflag $filename "extsize" && echo "e flag set" || \ + echo "e flag unset" +} + +check_extsz_xflag_across_remount() +{ + local filename=$1 + local extsize=$2 + _scratch_cycle_mount + check_extsz_and_xflag $filename $extsize +} + +# Extsize flag should be cleared when extsize is reset, so this function +# checks that this behavior is followed. +reset_extsz_and_recheck_extsz_xflag() +{ + local filename=$1 + echo "Re-setting extsize hint to 0" + $XFS_IO_PROG -c "extsize 0" $filename + check_extsz_xflag_across_remount $filename "0" +} + +check_extsz_xflag_before_and_after_reset() +{ + local filename=$1 + local extsize=$2 + check_extsz_xflag_across_remount $filename $extsize + reset_extsz_and_recheck_extsz_xflag $filename +} + +test_empty_file() +{ + echo "TEST: Set extsize on empty file" + local filename=$1 + $XFS_IO_PROG \ + -c "open -f $filename" \ + -c "extsize $EXTSIZE" \ + + check_extsz_xflag_before_and_after_reset $filename $EXTSIZE + echo +} + +test_data_delayed() +{ + echo "TEST: Set extsize on non-empty file with delayed allocation" + local filename=$1 + $XFS_IO_PROG \ + -c "open -f $filename" \ + -c "pwrite -q 0 $FILE_DATA_SIZE" \ + -c "extsize $EXTSIZE" | _filter_scratch + + echo "test for default extsize setting if any" + read_file_extsize $filename $DEFAULT_EXTSIZE + echo +} + +test_data_allocated() +{ + echo "TEST: Set extsize on non-empty file with allocated extents" + local filename=$1 + $XFS_IO_PROG \ + -c "open -f $filename" \ + -c "pwrite -qW 0 $FILE_DATA_SIZE" \ + -c "extsize $EXTSIZE" | _filter_scratch + + echo "test for default extsize setting if any" + read_file_extsize $filename $DEFAULT_EXTSIZE + echo +} + +test_truncate_allocated() +{ + echo "TEST: Set extsize after truncating a file with allocated extents" + local filename=$1 + $XFS_IO_PROG \ + -c "open -f $filename" \ + -c "pwrite -qW 0 $FILE_DATA_SIZE" \ + -c "truncate 0" \ + -c "extsize $EXTSIZE" \ + + check_extsz_xflag_across_remount $filename $EXTSIZE + echo +} + +test_truncate_delayed() +{ + echo "TEST: Set extsize after truncating a file with delayed allocation" + local filename=$1 + $XFS_IO_PROG \ + -c "open -f $filename" \ + -c "pwrite -q 0 $FILE_DATA_SIZE" \ + -c "truncate 0" \ + -c "extsize $EXTSIZE" \ + + check_extsz_xflag_across_remount $filename $EXTSIZE + echo +} + +setup +echo -e "EXTSIZE = $EXTSIZE DEFAULT_EXTSIZE = $DEFAULT_EXTSIZE \ + BLOCKSIZE = $BLKSZ\n" >> "$seqres.full" + +NEW_FILE_NAME_PREFIX=$SCRATCH_MNT/new-file- + +test_empty_file "$NEW_FILE_NAME_PREFIX"00 +test_data_delayed "$NEW_FILE_NAME_PREFIX"01 +test_data_allocated "$NEW_FILE_NAME_PREFIX"02 +test_truncate_allocated "$NEW_FILE_NAME_PREFIX"03 +test_truncate_delayed "$NEW_FILE_NAME_PREFIX"04 + +status=0 +exit diff --git a/tests/generic/367.out b/tests/generic/367.out new file mode 100644 index 00000000..f94e8545 --- /dev/null +++ b/tests/generic/367.out @@ -0,0 +1,26 @@ +QA output created by 367 +TEST: Set extsize on empty file +[EXTSIZE] SCRATCH_MNT/new-file-00 +e flag set +Re-setting extsize hint to 0 +[EXTSIZE] SCRATCH_MNT/new-file-00 +e flag unset + +TEST: Set extsize on non-empty file with delayed allocation +xfs_io: FS_IOC_FSSETXATTR SCRATCH_MNT/new-file-01: Invalid argument +test for default extsize setting if any +[EXTSIZE] SCRATCH_MNT/new-file-01 + +TEST: Set extsize on non-empty file with allocated extents +xfs_io: FS_IOC_FSSETXATTR SCRATCH_MNT/new-file-02: Invalid argument +test for default extsize setting if any +[EXTSIZE] SCRATCH_MNT/new-file-02 + +TEST: Set extsize after truncating a file with allocated extents +[EXTSIZE] SCRATCH_MNT/new-file-03 +e flag set + +TEST: Set extsize after truncating a file with delayed allocation +[EXTSIZE] SCRATCH_MNT/new-file-04 +e flag set +