@@ -68,22 +68,26 @@
.word 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5
.word 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3
.word 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208
.word 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
+ .macro load_round_constants tmp
+ adr_l \tmp, .Lsha2_rcon
+ ld1 { v0.4s- v3.4s}, [\tmp], #64
+ ld1 { v4.4s- v7.4s}, [\tmp], #64
+ ld1 { v8.4s-v11.4s}, [\tmp], #64
+ ld1 {v12.4s-v15.4s}, [\tmp]
+ .endm
+
/*
* int __sha256_ce_transform(struct sha256_ce_state *sst, u8 const *src,
* int blocks)
*/
.text
SYM_FUNC_START(__sha256_ce_transform)
- /* load round constants */
- adr_l x8, .Lsha2_rcon
- ld1 { v0.4s- v3.4s}, [x8], #64
- ld1 { v4.4s- v7.4s}, [x8], #64
- ld1 { v8.4s-v11.4s}, [x8], #64
- ld1 {v12.4s-v15.4s}, [x8]
+
+ load_round_constants x8
/* load state */
ld1 {dgav.4s, dgbv.4s}, [x0]
/* load sha256_ce_state::finalize */
@@ -153,5 +157,250 @@ CPU_LE( rev32 v19.16b, v19.16b )
/* store new state */
3: st1 {dgav.4s, dgbv.4s}, [x0]
mov w0, w2
ret
SYM_FUNC_END(__sha256_ce_transform)
+
+ .unreq dga
+ .unreq dgav
+ .unreq dgb
+ .unreq dgbv
+ .unreq t0
+ .unreq t1
+ .unreq dg0q
+ .unreq dg0v
+ .unreq dg1q
+ .unreq dg1v
+ .unreq dg2q
+ .unreq dg2v
+
+ // parameters for __sha256_ce_finup2x()
+ sctx .req x0
+ data1 .req x1
+ data2 .req x2
+ len .req w3
+ out1 .req x4
+ out2 .req x5
+
+ // other scalar variables
+ count .req x6
+ final_step .req w7
+
+ // x8-x9 are used as temporaries.
+
+ // v0-v15 are used to cache the SHA-256 round constants.
+ // v16-v23 are used for the data.
+ // v24-v31 are used for the state and temporaries as given below.
+ state0_a_q .req q24
+ state0_a .req v24
+ state1_a_q .req q25
+ state1_a .req v25
+ state0_b_q .req q26
+ state0_b .req v26
+ state1_b_q .req q27
+ state1_b .req v27
+ t0_a .req v28
+ t0_b .req v29
+ t1_a_q .req q30
+ t1_a .req v30
+ t1_b_q .req q31
+ t1_b .req v31
+
+#define OFFSETOF_COUNT 32 // offsetof(struct sha256_state, count)
+#define OFFSETOF_BUF 40 // offsetof(struct sha256_state, buf)
+
+ .macro do_4rounds_2x i, k, w0_a, w1_a, w2_a, w3_a, \
+ w0_b, w1_b, w2_b, w3_b
+ add t0_a\().4s, \w0_a\().4s, \k\().4s
+ add t0_b\().4s, \w0_b\().4s, \k\().4s
+ .if \i < 48
+ sha256su0 \w0_a\().4s, \w1_a\().4s
+ sha256su0 \w0_b\().4s, \w1_b\().4s
+ sha256su1 \w0_a\().4s, \w2_a\().4s, \w3_a\().4s
+ sha256su1 \w0_b\().4s, \w2_b\().4s, \w3_b\().4s
+ .endif
+ mov t1_a.16b, state0_a.16b
+ mov t1_b.16b, state0_b.16b
+ sha256h state0_a_q, state1_a_q, t0_a\().4s
+ sha256h state0_b_q, state1_b_q, t0_b\().4s
+ sha256h2 state1_a_q, t1_a_q, t0_a\().4s
+ sha256h2 state1_b_q, t1_b_q, t0_b\().4s
+ .endm
+
+ .macro do_16rounds_2x i, k0, k1, k2, k3
+ do_4rounds_2x \i + 0, \k0, v16, v17, v18, v19, v20, v21, v22, v23
+ do_4rounds_2x \i + 4, \k1, v17, v18, v19, v16, v21, v22, v23, v20
+ do_4rounds_2x \i + 8, \k2, v18, v19, v16, v17, v22, v23, v20, v21
+ do_4rounds_2x \i + 12, \k3, v19, v16, v17, v18, v23, v20, v21, v22
+ .endm
+
+//
+// void __sha256_ce_finup2x(const struct sha256_state *sctx,
+// const u8 *data1, const u8 *data2, int len,
+// u8 out1[SHA256_DIGEST_SIZE],
+// u8 out2[SHA256_DIGEST_SIZE]);
+//
+// This function computes the SHA-256 digests of two messages |data1| and
+// |data2| that are both |len| bytes long, starting from the initial state
+// |sctx|. |len| must be at least SHA256_BLOCK_SIZE.
+//
+// The instructions for the two SHA-256 operations are interleaved. On many
+// CPUs, this is almost twice as fast as hashing each message individually due
+// to taking better advantage of the CPU's SHA-256 and SIMD throughput.
+//
+SYM_FUNC_START(__sha256_ce_finup2x)
+ sub sp, sp, #128
+ mov final_step, #0
+ load_round_constants x8
+
+ // Load the initial state from sctx->state.
+ ld1 {state0_a.4s-state1_a.4s}, [sctx]
+
+ // Load sctx->count. Take the mod 64 of it to get the number of bytes
+ // that are buffered in sctx->buf. Also save it in a register with len
+ // added to it.
+ ldr x8, [sctx, #OFFSETOF_COUNT]
+ add count, x8, len, sxtw
+ and x8, x8, #63
+ cbz x8, .Lfinup2x_enter_loop // No bytes buffered?
+
+ // x8 bytes (1 to 63) are currently buffered in sctx->buf. Load them
+ // followed by the first 64 - x8 bytes of data. Since len >= 64, we
+ // just load 64 bytes from each of sctx->buf, data1, and data2
+ // unconditionally and rearrange the data as needed.
+ add x9, sctx, #OFFSETOF_BUF
+ ld1 {v16.16b-v19.16b}, [x9]
+ st1 {v16.16b-v19.16b}, [sp]
+
+ ld1 {v16.16b-v19.16b}, [data1], #64
+ add x9, sp, x8
+ st1 {v16.16b-v19.16b}, [x9]
+ ld1 {v16.4s-v19.4s}, [sp]
+
+ ld1 {v20.16b-v23.16b}, [data2], #64
+ st1 {v20.16b-v23.16b}, [x9]
+ ld1 {v20.4s-v23.4s}, [sp]
+
+ sub len, len, #64
+ sub data1, data1, x8
+ sub data2, data2, x8
+ add len, len, w8
+ mov state0_b.16b, state0_a.16b
+ mov state1_b.16b, state1_a.16b
+ b .Lfinup2x_loop_have_data
+
+.Lfinup2x_enter_loop:
+ sub len, len, #64
+ mov state0_b.16b, state0_a.16b
+ mov state1_b.16b, state1_a.16b
+.Lfinup2x_loop:
+ // Load the next two data blocks.
+ ld1 {v16.4s-v19.4s}, [data1], #64
+ ld1 {v20.4s-v23.4s}, [data2], #64
+.Lfinup2x_loop_have_data:
+ // Convert the words of the data blocks from big endian.
+CPU_LE( rev32 v16.16b, v16.16b )
+CPU_LE( rev32 v17.16b, v17.16b )
+CPU_LE( rev32 v18.16b, v18.16b )
+CPU_LE( rev32 v19.16b, v19.16b )
+CPU_LE( rev32 v20.16b, v20.16b )
+CPU_LE( rev32 v21.16b, v21.16b )
+CPU_LE( rev32 v22.16b, v22.16b )
+CPU_LE( rev32 v23.16b, v23.16b )
+.Lfinup2x_loop_have_bswapped_data:
+
+ // Save the original state for each block.
+ st1 {state0_a.4s-state1_b.4s}, [sp]
+
+ // Do the SHA-256 rounds on each block.
+ do_16rounds_2x 0, v0, v1, v2, v3
+ do_16rounds_2x 16, v4, v5, v6, v7
+ do_16rounds_2x 32, v8, v9, v10, v11
+ do_16rounds_2x 48, v12, v13, v14, v15
+
+ // Add the original state for each block.
+ ld1 {v16.4s-v19.4s}, [sp]
+ add state0_a.4s, state0_a.4s, v16.4s
+ add state1_a.4s, state1_a.4s, v17.4s
+ add state0_b.4s, state0_b.4s, v18.4s
+ add state1_b.4s, state1_b.4s, v19.4s
+
+ // Update len and loop back if more blocks remain.
+ sub len, len, #64
+ tbz len, #31, .Lfinup2x_loop
+
+ // Check if any final blocks need to be handled.
+ // final_step = 2: all done
+ // final_step = 1: need to do count-only padding block
+ // final_step = 0: need to do the block with 0x80 padding byte
+ tbnz final_step, #1, .Lfinup2x_done
+ tbnz final_step, #0, .Lfinup2x_finalize_countonly
+ add len, len, #64
+ cbz len, .Lfinup2x_finalize_blockaligned
+
+ // Not block-aligned; 1 <= len <= 63 data bytes remain. Pad the block.
+ sub w8, len, #64 // w8 = len - 64
+ add data1, data1, w8, sxtw // data1 += len - 64
+ add data2, data2, w8, sxtw // data2 += len - 64
+ ld1 {v16.16b-v19.16b}, [data1]
+ st1 {v16.16b-v19.16b}, [sp]
+ mov x9, 0x80
+ fmov d16, x9
+ movi v17.16b, #0
+ stp q16, q17, [sp, #64]
+ stp q17, q17, [sp, #96]
+ sub x9, sp, w8, sxtw // x9 = &sp[64 - len]
+ cmp len, #56
+ b.ge 1f // will count spill into its own block?
+ lsl count, count, #3
+ rev count, count
+ str count, [x9, #56]
+ mov final_step, #2 // won't need count-only block
+ b 2f
+1:
+ mov final_step, #1 // will need count-only block
+2:
+ ld1 {v16.4s-v19.4s}, [x9]
+ ld1 {v20.16b-v23.16b}, [data2]
+ st1 {v20.16b-v23.16b}, [sp]
+ ld1 {v20.4s-v23.4s}, [x9]
+ b .Lfinup2x_loop_have_data
+
+ // Prepare a padding block, either:
+ //
+ // {0x80, 0, 0, 0, ..., count (as __be64)}
+ // This is for a block aligned message.
+ //
+ // { 0, 0, 0, 0, ..., count (as __be64)}
+ // This is for a message whose length mod 64 is >= 56.
+ //
+ // Pre-swap the endianness of the words.
+.Lfinup2x_finalize_countonly:
+ movi v16.2d, #0
+ b 1f
+.Lfinup2x_finalize_blockaligned:
+ mov x8, #0x80000000
+ fmov d16, x8
+1:
+ movi v17.2d, #0
+ movi v18.2d, #0
+ ror count, count, #29 // ror(lsl(count, 3), 32)
+ mov v19.d[0], xzr
+ mov v19.d[1], count
+ mov v20.16b, v16.16b
+ movi v21.2d, #0
+ movi v22.2d, #0
+ mov v23.16b, v19.16b
+ mov final_step, #2
+ b .Lfinup2x_loop_have_bswapped_data
+
+.Lfinup2x_done:
+ // Write the two digests with all bytes in the correct order.
+CPU_LE( rev32 state0_a.16b, state0_a.16b )
+CPU_LE( rev32 state1_a.16b, state1_a.16b )
+CPU_LE( rev32 state0_b.16b, state0_b.16b )
+CPU_LE( rev32 state1_b.16b, state1_b.16b )
+ st1 {state0_a.4s-state1_a.4s}, [out1]
+ st1 {state0_b.4s-state1_b.4s}, [out2]
+ add sp, sp, #128
+ ret
+SYM_FUNC_END(__sha256_ce_finup2x)
@@ -31,10 +31,15 @@ extern const u32 sha256_ce_offsetof_count;
extern const u32 sha256_ce_offsetof_finalize;
asmlinkage int __sha256_ce_transform(struct sha256_ce_state *sst, u8 const *src,
int blocks);
+asmlinkage void __sha256_ce_finup2x(const struct sha256_state *sctx,
+ const u8 *data1, const u8 *data2, int len,
+ u8 out1[SHA256_DIGEST_SIZE],
+ u8 out2[SHA256_DIGEST_SIZE]);
+
static void sha256_ce_transform(struct sha256_state *sst, u8 const *src,
int blocks)
{
while (blocks) {
int rem;
@@ -122,10 +127,44 @@ static int sha256_ce_digest(struct shash_desc *desc, const u8 *data,
{
sha256_base_init(desc);
return sha256_ce_finup(desc, data, len, out);
}
+static noinline_for_stack int
+sha256_finup2x_fallback(struct sha256_state *sctx, const u8 *data1,
+ const u8 *data2, unsigned int len, u8 *out1, u8 *out2)
+{
+ struct sha256_state sctx2 = *sctx;
+
+ sha256_update(sctx, data1, len);
+ sha256_final(sctx, out1);
+ sha256_update(&sctx2, data2, len);
+ sha256_final(&sctx2, out2);
+ return 0;
+}
+
+static int sha256_ce_finup2x(struct shash_desc *desc,
+ const u8 *data1, const u8 *data2,
+ unsigned int len, u8 *out1, u8 *out2)
+{
+ struct sha256_ce_state *sctx = shash_desc_ctx(desc);
+
+ if (unlikely(!crypto_simd_usable() || len < SHA256_BLOCK_SIZE))
+ return sha256_finup2x_fallback(&sctx->sst, data1, data2, len,
+ out1, out2);
+
+ /* __sha256_ce_finup2x() assumes the following offsets. */
+ BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
+ BUILD_BUG_ON(offsetof(struct sha256_state, count) != 32);
+ BUILD_BUG_ON(offsetof(struct sha256_state, buf) != 40);
+
+ kernel_neon_begin();
+ __sha256_ce_finup2x(&sctx->sst, data1, data2, len, out1, out2);
+ kernel_neon_end();
+ return 0;
+}
+
static int sha256_ce_export(struct shash_desc *desc, void *out)
{
struct sha256_ce_state *sctx = shash_desc_ctx(desc);
memcpy(out, &sctx->sst, sizeof(struct sha256_state));
@@ -162,10 +201,11 @@ static struct shash_alg algs[] = { {
.init = sha256_base_init,
.update = sha256_ce_update,
.final = sha256_ce_final,
.finup = sha256_ce_finup,
.digest = sha256_ce_digest,
+ .finup2x = sha256_ce_finup2x,
.export = sha256_ce_export,
.import = sha256_ce_import,
.descsize = sizeof(struct sha256_ce_state),
.statesize = sizeof(struct sha256_state),
.digestsize = SHA256_DIGEST_SIZE,