@@ -10,6 +10,32 @@ export GIT_TEST_FATAL_REGISTER_SUBMODULE_ODB
pwd=$(pwd)
+write_expected_sub () {
+ NEW_HEAD=$1 &&
+ cat >"$pwd/expect.err.sub" <<-EOF
+ Fetching submodule submodule
+ From $pwd/submodule
+ OLD_HEAD..$NEW_HEAD sub -> origin/sub
+ EOF
+}
+
+write_expected_deep () {
+ NEW_HEAD=$1 &&
+ cat >"$pwd/expect.err.deep" <<-EOF
+ Fetching submodule submodule/subdir/deepsubmodule
+ From $pwd/deepsubmodule
+ OLD_HEAD..$NEW_HEAD deep -> origin/deep
+ EOF
+}
+
+write_expected_super () {
+ NEW_HEAD=$1 &&
+ cat >"$pwd/expect.err.super" <<-EOF
+ From $pwd/.
+ OLD_HEAD..$NEW_HEAD super -> origin/super
+ EOF
+}
+
# For each submodule in the test setup, this creates a commit and writes
# a file that contains the expected err if that new commit were fetched.
# These output files get concatenated in the right order by
@@ -17,27 +43,21 @@ pwd=$(pwd)
add_upstream_commit() {
(
cd submodule &&
- head1=$(git rev-parse --short HEAD) &&
echo new >> subfile &&
test_tick &&
git add subfile &&
git commit -m new subfile &&
- head2=$(git rev-parse --short HEAD) &&
- echo "Fetching submodule submodule" > ../expect.err.sub &&
- echo "From $pwd/submodule" >> ../expect.err.sub &&
- echo " $head1..$head2 sub -> origin/sub" >> ../expect.err.sub
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_sub $new_head
) &&
(
cd deepsubmodule &&
- head1=$(git rev-parse --short HEAD) &&
echo new >> deepsubfile &&
test_tick &&
git add deepsubfile &&
git commit -m new deepsubfile &&
- head2=$(git rev-parse --short HEAD) &&
- echo "Fetching submodule submodule/subdir/deepsubmodule" > ../expect.err.deep
- echo "From $pwd/deepsubmodule" >> ../expect.err.deep &&
- echo " $head1..$head2 deep -> origin/deep" >> ../expect.err.deep
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_deep $new_head
)
}
@@ -62,7 +82,8 @@ verify_fetch_result () {
then
cat expect.err.deep >>expect.err.combined
fi &&
- test_cmp expect.err.combined $ACTUAL_ERR
+ sed -e 's/[0-9a-f][0-9a-f]*\.\./OLD_HEAD\.\./' "$ACTUAL_ERR" >actual.err.cmp &&
+ test_cmp expect.err.combined actual.err.cmp
}
test_expect_success setup '
@@ -274,12 +295,10 @@ test_expect_success "Recursion doesn't happen when no new commits are fetched in
'
test_expect_success "Recursion stops when no new submodule commits are fetched" '
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >>expect.err.super &&
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_super $new_head &&
rm expect.err.deep &&
(
cd downstream &&
@@ -291,13 +310,11 @@ test_expect_success "Recursion stops when no new submodule commits are fetched"
test_expect_success "Recursion doesn't happen when new superproject commits don't change any submodules" '
add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
echo a > file &&
git add file &&
git commit -m "new file" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >> expect.err.super &&
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_super $new_head &&
rm expect.err.sub &&
rm expect.err.deep &&
(
@@ -318,12 +335,10 @@ test_expect_success "Recursion picks up config in submodule" '
)
) &&
add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >> expect.err.super &&
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_super $new_head &&
(
cd downstream &&
git fetch >../actual.out 2>../actual.err &&
@@ -345,20 +360,15 @@ test_expect_success "Recursion picks up all submodules when necessary" '
git fetch &&
git checkout -q FETCH_HEAD
) &&
- head1=$(git rev-parse --short HEAD^) &&
git add subdir/deepsubmodule &&
git commit -m "new deepsubmodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "Fetching submodule submodule" > ../expect.err.sub &&
- echo "From $pwd/submodule" >> ../expect.err.sub &&
- echo " $head1..$head2 sub -> origin/sub" >> ../expect.err.sub
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_sub $new_head
) &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >> expect.err.super &&
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_super $new_head &&
(
cd downstream &&
git fetch >../actual.out 2>../actual.err
@@ -376,13 +386,10 @@ test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no ne
git fetch &&
git checkout -q FETCH_HEAD
) &&
- head1=$(git rev-parse --short HEAD^) &&
git add subdir/deepsubmodule &&
git commit -m "new deepsubmodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo Fetching submodule submodule > ../expect.err.sub &&
- echo "From $pwd/submodule" >> ../expect.err.sub &&
- echo " $head1..$head2 sub -> origin/sub" >> ../expect.err.sub
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_sub $new_head
) &&
(
cd downstream &&
@@ -395,12 +402,10 @@ test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no ne
'
test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necessary (and ignores config)" '
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >>expect.err.super &&
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_super $new_head &&
(
cd downstream &&
git config fetch.recurseSubmodules false &&
@@ -421,13 +426,11 @@ test_expect_success "'--recurse-submodules=on-demand' recurses as deep as necess
test_expect_success "'--recurse-submodules=on-demand' stops when no new submodule commits are found in the superproject (and ignores config)" '
add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
echo a >> file &&
git add file &&
git commit -m "new file" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >> expect.err.super &&
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_super $new_head &&
rm expect.err.sub &&
rm expect.err.deep &&
(
@@ -445,12 +448,10 @@ test_expect_success "'fetch.recurseSubmodules=on-demand' overrides global config
) &&
add_upstream_commit &&
git config --global fetch.recurseSubmodules false &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >>expect.err.super &&
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_super $new_head &&
rm expect.err.deep &&
(
cd downstream &&
@@ -473,12 +474,10 @@ test_expect_success "'submodule.<sub>.fetchRecurseSubmodules=on-demand' override
) &&
add_upstream_commit &&
git config fetch.recurseSubmodules false &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "new submodule" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >>expect.err.super &&
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_super $new_head &&
rm expect.err.deep &&
(
cd downstream &&
@@ -499,12 +498,10 @@ test_expect_success "don't fetch submodule when newly recorded commits are alrea
cd submodule &&
git checkout -q HEAD^^
) &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git commit -m "submodule rewound" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." > expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >> expect.err.super &&
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_super $new_head &&
rm expect.err.sub &&
# This file does not exist, but rm -f for readability
rm -f expect.err.deep &&
@@ -526,13 +523,11 @@ test_expect_success "'fetch.recurseSubmodules=on-demand' works also without .git
git fetch --recurse-submodules
) &&
add_upstream_commit &&
- head1=$(git rev-parse --short HEAD) &&
git add submodule &&
git rm .gitmodules &&
git commit -m "new submodule without .gitmodules" &&
- head2=$(git rev-parse --short HEAD) &&
- echo "From $pwd/." >expect.err.super &&
- echo " $head1..$head2 super -> origin/super" >>expect.err.super &&
+ new_head=$(git rev-parse --short HEAD) &&
+ write_expected_super $new_head &&
rm expect.err.deep &&
(
cd downstream &&
In the previous commit message, we noted that not all of the "git fetch" stderr is relevant to the tests. Most of the test setup lines are dedicated to these details of the stderr: 1. which repos (super/sub/deep) are involved in the fetch 2. the head of the remote-tracking branch before the fetch (i.e. $head1) 3. the head of the remote-tracking branch after the fetch (i.e. $head2) 1. and 3. are relevant because they tell us that the expected commit is fetched by the expected repo, but 2. is completely irrelevant. Stop asserting on $head1 by replacing it with a dummy value in the actual and expected output. Do this by introducing test helpers (write_expected_*()) that make it easier to construct the expected output, and use sed to munge the actual output. Signed-off-by: Glen Choo <chooglen@google.com> --- t/t5526-fetch-submodules.sh | 117 +++++++++++++++++------------------- 1 file changed, 56 insertions(+), 61 deletions(-)