@@ -1,5 +1,5 @@
-Like other projects, we also have some guidelines to keep to the
-code. For Git in general, a few rough rules are:
+Like other projects, we also have some guidelines for our code. For
+Git in general, a few rough rules are:
- Most importantly, we never say "It's in POSIX; we'll happily
ignore your needs should your system not conform to it."
@@ -32,7 +32,7 @@ information on using the script.
This is adapted from Linux's suggestion in its CodingStyle document:
-- To follow rules of the CodingGuideline, it's useful to put the following in
+- To follow the rules in CodingGuidelines, it's useful to put the following in
GIT_CHECKOUT/.dir-locals.el, assuming you use cperl-mode:
----
;; note the first part is useful for C editing, too
@@ -11,7 +11,7 @@ file. The file `/etc/gitconfig` can be used to store a system-wide
default configuration.
The configuration variables are used by both the Git plumbing
-and the porcelains. The variables are divided into sections, wherein
+and the porcelain commands. The variables are divided into sections, wherein
the fully qualified variable name of the variable itself is the last
dot-separated segment and the section name is everything before the last
dot. The variable names are case-insensitive, allow only alphanumeric
@@ -103,7 +103,7 @@ was found. See below for examples.
Conditional includes
~~~~~~~~~~~~~~~~~~~~
-You can include a config file from another conditionally by setting a
+You can conditionally include a config file from another by setting a
`includeIf.<condition>.path` variable to the name of the file to be
included.
@@ -2,7 +2,7 @@ apply.ignoreWhitespace::
When set to 'change', tells 'git apply' to ignore changes in
whitespace, in the same way as the `--ignore-space-change`
option.
- When set to one of: no, none, never, false tells 'git apply' to
+ When set to one of: no, none, never, false, it tells 'git apply' to
respect all whitespace differences.
See linkgit:git-apply[1].
@@ -36,7 +36,7 @@ branch.sort::
branch.<name>.remote::
When on branch <name>, it tells 'git fetch' and 'git push'
- which remote to fetch from/push to. The remote to push to
+ which remote to fetch from or push to. The remote to push to
may be overridden with `remote.pushDefault` (for all branches).
The remote to push to, for the current branch, may be further
overridden by `branch.<name>.pushRemote`. If no remote is
@@ -4,8 +4,8 @@ clone.defaultRemoteName::
option to linkgit:git-clone[1].
clone.rejectShallow::
- Reject to clone a repository if it is a shallow one, can be overridden by
- passing option `--reject-shallow` in command line. See linkgit:git-clone[1]
+ Reject to clone a repository if it is a shallow one; this can be overridden by
+ passing the `--reject-shallow` option on the command line. See linkgit:git-clone[1]
clone.filterSubmodules::
If a partial clone filter is provided (see `--filter` in
@@ -31,6 +31,6 @@ credentialCache.ignoreSIGHUP::
credentialStore.lockTimeoutMS::
The length of time, in milliseconds, for git-credential-store to retry
- when trying to lock the credentials file. Value 0 means not to retry at
+ when trying to lock the credentials file. A value of 0 means not to retry at
all; -1 means to try indefinitely. Default is 1000 (i.e., retry for
1s).
@@ -52,8 +52,8 @@ fetch.pruneTags::
fetch.output::
Control how ref update status is printed. Valid values are
- `full` and `compact`. Default value is `full`. See section
- OUTPUT in linkgit:git-fetch[1] for detail.
+ `full` and `compact`. Default value is `full`. See the
+ OUTPUT section in linkgit:git-fetch[1] for detail.
fetch.negotiationAlgorithm::
Control how information about the commits in the local repository
@@ -17,7 +17,7 @@ Unlike variables like `color.ui` and `core.editor` the
`receive.fsck.<msg-id>` and `fetch.fsck.<msg-id>` variables will not
fall back on the `fsck.<msg-id>` configuration if they aren't set. To
uniformly configure the same fsck settings in different circumstances
-all three of them they must all set to the same values.
+all three of them must be set to the same values.
+
When `fsck.<msg-id>` is set, errors can be switched to warnings and
vice versa by configuring the `fsck.<msg-id>` setting where the
@@ -59,7 +59,7 @@ Unlike variables like `color.ui` and `core.editor` the
`receive.fsck.skipList` and `fetch.fsck.skipList` variables will not
fall back on the `fsck.skipList` configuration if they aren't set. To
uniformly configure the same fsck settings in different circumstances
-all three of them they must all set to the same values.
+all three of them must be set to the same values.
+
Older versions of Git (before 2.20) documented that the object names
list should be sorted. This was never a requirement, the object names
@@ -1,5 +1,5 @@
fsmonitor.allowRemote::
- By default, the fsmonitor daemon refuses to work against network-mounted
+ By default, the fsmonitor daemon refuses to work with network-mounted
repositories. Setting `fsmonitor.allowRemote` to `true` overrides this
behavior. Only respected when `core.fsmonitor` is set to `true`.
@@ -24,7 +24,7 @@ gc.auto::
default value is 6700.
+
Setting this to 0 disables not only automatic packing based on the
-number of loose objects, but any other heuristic `git gc --auto` will
+number of loose objects, but also any other heuristic `git gc --auto` will
otherwise use to determine if there's work to do, such as
`gc.autoPackLimit`.
@@ -4,7 +4,7 @@ gpg.program::
same command-line interface as GPG, namely, to verify a detached
signature, "`gpg --verify $signature - <$file`" is run, and the
program is expected to signal a good signature by exiting with
- code 0, and to generate an ASCII-armored detached signature, the
+ code 0. To generate an ASCII-armored detached signature, the
standard input of "`gpg -bsau $key`" is fed with the contents to be
signed, and the program is expected to send the result to its
standard output.
@@ -260,7 +260,7 @@ http.noEPSV::
http.userAgent::
The HTTP USER_AGENT string presented to an HTTP server. The default
- value represents the version of the client Git such as git/1.7.1.
+ value represents the version of the Git client such as git/1.7.1.
This option allows you to override this value to a more common value
such as Mozilla/4.0. This may be necessary, for instance, if
connecting through a firewall that restricts HTTP connections to a set
@@ -37,7 +37,7 @@ imap.preformattedHTML::
format=fixed email. Default is `false`.
imap.authMethod::
- Specify authenticate method for authentication with IMAP server.
+ Specify the authentication method for authenticating with the IMAP server.
If Git was built with the NO_CURL option, or if your curl version is older
than 7.34.0, or if you're running git-imap-send with the `--no-curl`
option, the only supported method is 'CRAM-MD5'. If this is not set
@@ -47,7 +47,7 @@ mergetool.meld.useAutoMerge::
mergetool.vimdiff.layout::
The vimdiff backend uses this variable to control how its split
- windows look like. Applies even if you are using Neovim (`nvim`) or
+ windows appear. Applies even if you are using Neovim (`nvim`) or
gVim (`gvim`) as the merge tool. See BACKEND SPECIFIC HINTS section
ifndef::git-mergetool[]
in linkgit:git-mergetool[1].
@@ -83,7 +83,7 @@ pack.indexVersion::
the new pack index with capabilities for packs larger than 4 GB
as well as proper protection against the repacking of corrupted
packs. Version 2 is the default. Note that version 2 is enforced
- and this config option ignored whenever the corresponding pack is
+ and this config option is ignored whenever the corresponding pack is
larger than 2 GB.
+
If you have an old Git that does not understand the version 2 `*.idx` file,
@@ -102,8 +102,8 @@ pack.packSizeLimit::
in the creation of multiple packfiles.
+
Note that this option is rarely useful, and may result in a larger total
-on-disk size (because Git will not store deltas between packs), as well
-as worse runtime performance (object lookup within multiple packs is
+on-disk size (because Git will not store deltas between packs) and
+worse runtime performance (object lookup within multiple packs is
slower than a single pack, and optimizations like reachability bitmaps
cannot cope with multiple packs).
+
@@ -19,7 +19,7 @@ receive.certNonceSeed::
key.
receive.certNonceSlop::
- When a `git push --signed` sent a push certificate with a
+ When a `git push --signed` sends a push certificate with a
"nonce" that was issued by a receive-pack serving the same
repository within this many seconds, export the "nonce"
found in the certificate to `GIT_PUSH_CERT_NONCE` to the
@@ -14,7 +14,7 @@ repository that contains a bare repository and running a Git command
within that directory.
+
This config setting is only respected in protected configuration (see
-<<SCOPES>>). This prevents the untrusted repository from tampering with
+<<SCOPES>>). This prevents untrusted repositories from tampering with
this value.
safe.directory::
@@ -32,7 +32,7 @@ override any such directories specified in the system config), add a
`safe.directory` entry with an empty value.
+
This config setting is only respected in protected configuration (see
-<<SCOPES>>). This prevents the untrusted repository from tampering with this
+<<SCOPES>>). This prevents untrusted repositories from tampering with this
value.
+
The value of this setting is interpolated, i.e. `~/<path>` expands to a
@@ -2,7 +2,7 @@ submodule.<name>.url::
The URL for a submodule. This variable is copied from the .gitmodules
file to the git config via 'git submodule init'. The user can change
the configured URL before obtaining the submodule via 'git submodule
- update'. If neither submodule.<name>.active or submodule.active are
+ update'. If neither submodule.<name>.active nor submodule.active are
set, the presence of this variable is used as a fallback to indicate
whether the submodule is of interest to git commands.
See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
@@ -66,6 +66,6 @@ trace2.destinationDebug::
trace2.maxFiles::
Integer. When writing trace files to a target directory, do not
- write additional traces if we would exceed this many files. Instead,
+ write additional traces if doing so would exceed this many files. Instead,
write a sentinel file that will block further tracing to this
directory. Defaults to 0, which disables this check.
@@ -7,7 +7,7 @@ transfer.credentialsInUrl::
and any other direct use of the configured URL.
+
Note that this is currently limited to detecting credentials in
-`remote.<name>.url` configuration, it won't detect credentials in
+`remote.<name>.url` configuration; it won't detect credentials in
`remote.<name>.pushurl` configuration.
+
You might want to enable this to prevent inadvertent credentials
@@ -26,7 +26,7 @@ exposure, e.g. because:
documented in procfs(5) allows for configuring this behavior.
+
If such concerns don't apply to you then you probably don't need to be
-concerned about credentials exposure due to storing that sensitive
+concerned about credentials exposure due to storing sensitive
data in git's configuration files. If you do want to use this, set
`transfer.credentialsInUrl` to one of these values:
+
@@ -10,7 +10,7 @@ committer.email::
If you need the `author` or `committer` to be different, the
`author.name`, `author.email`, `committer.name` or
`committer.email` variables can be set.
- Also, all of these can be overridden by the `GIT_AUTHOR_NAME`,
+ All of these can be overridden by the `GIT_AUTHOR_NAME`,
`GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_NAME`,
`GIT_COMMITTER_EMAIL` and `EMAIL` environment variables.
+
@@ -146,7 +146,7 @@ information about detected contents movement (renames and
copying detection) are designed to work with diff of two
<tree-ish> and are not used by combined diff format.
-3. It is followed by two-line from-file/to-file header
+3. It is followed by a two-line from-file/to-file header:
--- a/file
+++ b/file
@@ -157,7 +157,7 @@ files.
+
However, if the --combined-all-paths option is provided, instead of a
two-line from-file/to-file you get a N+1 line from-file/to-file header,
-where N is the number of parents in the merge commit
+where N is the number of parents in the merge commit:
--- a/file
--- a/file
@@ -733,7 +733,7 @@ matches "`fooasdfbar`" and "`foo/bar/baz/asdf`" but not "`foobarx`".
--rotate-to=<file>::
Discard the files before the named <file> from the output
(i.e. 'skip to'), or move them to the end of the output
- (i.e. 'rotate to'). These were invented primarily for use
+ (i.e. 'rotate to'). These options were invented primarily for the use
of the `git difftool` command, and may not be very useful
otherwise.
@@ -159,7 +159,7 @@ discouraged.
--allow-binary-replacement::
--binary::
- Historically we did not allow binary patch applied
+ Historically we did not allow binary patch application
without an explicit permission from the user, and this
flag was the way to do so. Currently we always allow binary
patch application, so this is a no-op.
@@ -21,14 +21,14 @@ structure for the named tree, and writes it out to the standard
output. If <prefix> is specified it is
prepended to the filenames in the archive.
-'git archive' behaves differently when given a tree ID versus when
-given a commit ID or tag ID. In the first case the current time is
-used as the modification time of each file in the archive. In the latter
-case the commit time as recorded in the referenced commit object is
-used instead. Additionally the commit ID is stored in a global
-extended pax header if the tar format is used; it can be extracted
-using 'git get-tar-commit-id'. In ZIP files it is stored as a file
-comment.
+'git archive' behaves differently when given a tree ID as opposed to a
+commit ID or tag ID. When a tree ID is provided, the current time is
+used as the modification time of each file in the archive. On the
+other hand, when a commit ID or tag ID is provided, the commit time as
+recorded in the referenced commit object is used instead.
+Additionally the commit ID is stored in a global extended pax header
+if the tar format is used; it can be extracted using 'git
+get-tar-commit-id'. In ZIP files it is stored as a file comment.
OPTIONS
-------
@@ -13,10 +13,11 @@ SYNOPSIS
DESCRIPTION
-----------
-Captures information about the user's machine, Git client, and repository state,
-as well as a form requesting information about the behavior the user observed,
-into a single text file which the user can then share, for example to the Git
-mailing list, in order to report an observed bug.
+Collects information about the user's machine, Git client, and repository
+state, in addition to a form requesting information about the behavior the
+user observed, and stores it in a single text file which the user can then
+share, for example to the Git mailing list, in order to report an observed
+bug.
The following information is requested from the user:
@@ -18,7 +18,7 @@ SYNOPSIS
DESCRIPTION
-----------
-Will copy all files listed from the index to the working directory
+Copies all listed files from the index to the working directory
(not overwriting existing files).
OPTIONS
@@ -12,7 +12,7 @@ SYNOPSIS
DESCRIPTION
-----------
-This counts the number of unpacked object files and disk space consumed by
+Counts the number of unpacked object files and disk space consumed by
them, to help you decide when it is a good time to repack.
@@ -20,7 +20,7 @@ OPTIONS
-------
-v::
--verbose::
- Report in more detail:
+ Provide more detailed reports:
+
count: the number of loose objects
+
@@ -94,7 +94,7 @@ unlocked) before it returned `password=secr3t`.
that `git credential` will ask for a new password in its next
invocation. In either case, `git credential` should be fed with
the credential description obtained from step (2) (which also
- contain the ones provided in step (1)).
+ contains the fields provided in step (1)).
[[IOFMT]]
INPUT/OUTPUT FORMAT
@@ -13,10 +13,10 @@ SYNOPSIS
DESCRIPTION
-----------
-Compares the content and mode of the blobs found in a tree object
+Compare the content and mode of the blobs found in a tree object
with the corresponding tracked files in the working tree, or with the
corresponding paths in the index. When <path> arguments are present,
-compares only paths matching those patterns. Otherwise all tracked
+compare only paths matching those patterns. Otherwise all tracked
files are compared.
OPTIONS
@@ -15,7 +15,7 @@ SYNOPSIS
DESCRIPTION
-----------
-Compares the content and mode of the blobs found via two tree objects.
+Compare the content and mode of blobs found via two tree objects.
If there is only one <tree-ish> given, the commit is compared with its parents
(see --stdin below).
@@ -622,7 +622,7 @@ in octal. Git only supports the following modes:
* `100755` or `755`: A normal, but executable, file.
* `120000`: A symlink, the content of the file will be the link target.
* `160000`: A gitlink, SHA-1 of the object refers to a commit in
- another repository. Git links can only be specified by SHA or through
+ another repository. Git links can only be specified either by SHA or through
a commit mark. They are used to implement submodules.
* `040000`: A subdirectory. Subdirectories can only be specified by
SHA or through a tree mark set with `--import-marks`.
@@ -39,10 +39,10 @@ OPTIONS
of from the command-line.
--path::
- Hash object as it were located at the given path. The location of
- file does not directly influence on the hash value, but path is
- used to determine what Git filters should be applied to the object
- before it can be placed to the object database, and, as result of
+ Hash object as if it were located at the given path. The location of
+ the file does not directly influence the hash value, but the path is
+ used to determine which Git filters should be applied to the object
+ before it can be placed in the object database. As a result of
applying filters, the actual blob put into the object database may
differ from the given file. This option is mainly useful for hashing
temporary files located outside of the working directory or files
@@ -109,7 +109,7 @@ other display programs (see below).
format. A web browser will be used for that purpose.
+
The web browser can be specified using the configuration variable
-`help.browser`, or `web.browser` if the former is not set. If none of
+`help.browser`, or `web.browser` if the former is not set. If neither of
these config variables is set, the 'git web{litdd}browse' helper script
(called by 'git help') will pick a suitable default. See
linkgit:git-web{litdd}browse[1] for more information about this.
@@ -23,7 +23,7 @@ discussion of `GIT_PROTOCOL` in the ENVIRONMENT section below.
It verifies that the directory has the magic file
"git-daemon-export-ok", and it will refuse to export any Git directory
that hasn't explicitly been marked for export this way (unless the
-`GIT_HTTP_EXPORT_ALL` environmental variable is set).
+`GIT_HTTP_EXPORT_ALL` environment variable is set).
By default, only the `upload-pack` service is enabled, which serves
'git fetch-pack' and 'git ls-remote' clients, which are invoked from
@@ -42,12 +42,12 @@ http.getanyfile::
any file within the repository, including objects that are
no longer reachable from a branch but are still present.
It is enabled by default, but a repository can disable it
- by setting this configuration item to `false`.
+ by setting this configuration value to `false`.
http.uploadpack::
This serves 'git fetch-pack' and 'git ls-remote' clients.
It is enabled by default, but a repository can disable it
- by setting this configuration item to `false`.
+ by setting this configuration value to `false`.
http.receivepack::
This serves 'git send-pack' clients, allowing push. It is
@@ -265,12 +265,12 @@ by the invoking web server, including:
* QUERY_STRING
* REQUEST_METHOD
-The `GIT_HTTP_EXPORT_ALL` environmental variable may be passed to
+The `GIT_HTTP_EXPORT_ALL` environment variable may be passed to
'git-http-backend' to bypass the check for the "git-daemon-export-ok"
file in each repository before allowing export of that repository.
The `GIT_HTTP_MAX_REQUEST_BUFFER` environment variable (or the
-`http.maxRequestBuffer` config variable) may be set to change the
+`http.maxRequestBuffer` config option) may be set to change the
largest ref negotiation request that git will handle during a fetch; any
fetch requiring a larger buffer will not succeed. This value should not
normally need to be changed, but may be helpful if you are fetching from
@@ -31,7 +31,7 @@ commit-id::
Report what is downloaded.
-w <filename>::
- Writes the commit-id into the filename under $GIT_DIR/refs/<filename> on
+ Writes the commit-id into the specified filename under $GIT_DIR/refs/<filename> on
the local end after the transfer is complete.
--stdin::
@@ -83,8 +83,8 @@ and where it is pushed is determined by using the destination side.
Without `--force`, the <src> ref is stored at the remote only if
<dst> does not exist, or <dst> is a proper subset (i.e. an
ancestor) of <src>. This check, known as "fast-forward check",
-is performed in order to avoid accidentally overwriting the
-remote ref and lose other peoples' commits from there.
+is performed to avoid accidentally overwriting the
+remote ref and losing other peoples' commits from there.
With `--force`, the fast-forward check is disabled for all refs.
@@ -16,10 +16,10 @@ SYNOPSIS
DESCRIPTION
-----------
-Reads a packed archive (.pack) from the specified file, and
-builds a pack index file (.idx) for it. Optionally writes a
+Reads a packed archive (.pack) from the specified file,
+builds a pack index file (.idx) for it, and optionally writes a
reverse-index (.rev) for the specified pack. The packed
-archive together with the pack index can then be placed in
+archive, together with the pack index, can then be placed in
the objects/pack/ directory of a Git repository.
@@ -68,8 +68,8 @@ OPTIONS
updated to use objects contained in the pack.
--keep=<msg>::
- Like --keep create a .keep file before moving the index into
- its final destination, but rather than creating an empty file
+ Like --keep, create a .keep file before moving the index into
+ its final destination. However, instead of creating an empty file
place '<msg>' followed by an LF into the .keep file. The '<msg>'
message can later be searched for within all .keep files to
locate any which have outlived their usefulness.
@@ -99,7 +99,7 @@ specified.
'group' (or 'true')::
-Make the repository group-writable, (and g+sx, since the git group may be not
+Make the repository group-writable, (and g+sx, since the git group may not be
the primary group of all users). This is used to loosen the permissions of an
otherwise safe umask(2) value. Note that the umask still applies to the other
permission bits (e.g. if umask is '0022', using 'group' will not remove read
@@ -25,12 +25,12 @@ SYNOPSIS
DESCRIPTION
-----------
-This merges the file listing in the index with the actual working
+This command merges the file listing in the index with the actual working
directory list, and shows different combinations of the two.
-One or more of the options below may be used to determine the files
+Several flags can be used to determine which files are
shown, and each file may be printed multiple times if there are
-multiple entries in the index or multiple statuses are applicable for
+multiple entries in the index or if multiple statuses are applicable for
the relevant file selection options.
OPTIONS
@@ -102,9 +102,9 @@ prefetch::
requested refs within `refs/prefetch/`. Also, tags are not updated.
+
This is done to avoid disrupting the remote-tracking branches. The end users
-expect these refs to stay unmoved unless they initiate a fetch. With prefetch
-task, however, the objects necessary to complete a later real fetch would
-already be obtained, so the real fetch would go faster. In the ideal case,
+expect these refs to stay unmoved unless they initiate a fetch. However,
+with the prefetch task, the objects necessary to complete a later real fetch
+would already be obtained, making the real fetch faster. In the ideal case,
it will just become an update to a bunch of remote-tracking branches without
any object transfer.
@@ -336,7 +336,7 @@ After seeing a conflict, you can do two things:
You can work through the conflict with a number of tools:
* Use a mergetool. `git mergetool` to launch a graphical
- mergetool which will work you through the merge.
+ mergetool which will work through the merge with you.
* Look at the diffs. `git diff` will show a three-way diff,
highlighting changes from both the `HEAD` and `MERGE_HEAD`
@@ -115,7 +115,7 @@ These are safe to remove once a file has been merged and its
`git mergetool` session has completed.
Setting the `mergetool.keepBackup` configuration variable to `false`
-causes `git mergetool` to automatically remove the backup as files
+causes `git mergetool` to automatically remove the backup files as files
are successfully merged.
BACKEND SPECIFIC HINTS
@@ -25,13 +25,13 @@ OPTIONS
--missing::
Allow missing objects. The default behaviour (without this option)
- is to verify that each tree entry's sha1 identifies an existing
+ is to verify that each tree entry's hash identifies an existing
object. This option has no effect on the treatment of gitlink entries
(aka "submodules") which are always allowed to be missing.
--batch::
Allow building of more than one tree object before exiting. Each
- tree is separated by a single blank line. The final new-line is
+ tree is separated by a single blank line. The final newline is
optional. Note - if the `-z` option is used, lines are terminated
with NUL.
@@ -70,7 +70,7 @@ to revert to color all lines according to the outer diff markers
Defaults to 60. Try a larger value if `git range-diff` erroneously
considers a large change a total rewrite (deletion of one commit
and addition of another), and a smaller one in the reverse case.
- See the ``Algorithm`` section below for an explanation why this is
+ See the ``Algorithm`` section below for an explanation of why this is
needed.
--left-only::
@@ -25,7 +25,7 @@ fast-forward (i.e. 2-way) merge, or a 3-way merge, with the `-m`
flag. When used with `-m`, the `-u` flag causes it to also update
the files in the work tree with the result of the merge.
-Trivial merges are done by 'git read-tree' itself. Only conflicting paths
+Only trivial merges are done by 'git read-tree' itself. Only conflicting paths
will be in unmerged state when 'git read-tree' returns.
OPTIONS
@@ -82,7 +82,7 @@ begins with `ext::`. Examples:
"ext::ssh -i /home/foo/.ssh/somekey user@host.example %S 'foo/repo'"::
Like host.example:foo/repo, but use /home/foo/.ssh/somekey as
- keypair and user as user on remote side. This avoids needing to
+ keypair and user as user on remote side. This avoids the need to
edit .ssh/config.
"ext::socat -t3600 - ABSTRACT-CONNECT:/git-server %G/somerepo"::
@@ -165,7 +165,7 @@ depth is 4095.
Exclude the given pack from repacking. This is the equivalent
of having `.keep` file on the pack. `<pack-name>` is the
pack file name without leading directory (e.g. `pack-123.pack`).
- The option could be specified multiple times to keep multiple
+ The option can be specified multiple times to keep multiple
packs.
--unpack-unreachable=<when>::
@@ -105,7 +105,7 @@ in linkgit:git-checkout[1] for details.
specified. Unmerged paths on the working tree are left alone.
--ignore-skip-worktree-bits::
- In sparse checkout mode, by default is to only update entries
+ In sparse checkout mode, the default is to only update entries
matched by `<pathspec>` and sparse patterns in
$GIT_DIR/info/sparse-checkout. This option ignores the sparse
patterns and unconditionally restores any files in
@@ -17,7 +17,7 @@ DESCRIPTION
:git-rev-list: 1
include::rev-list-description.txt[]
-'rev-list' is a very essential Git command, since it
+'rev-list' is an essential Git command, since it
provides the ability to build and traverse commit ancestry graphs. For
this reason, it has a lot of different options that enables it to be
used by commands as different as 'git bisect' and
@@ -36,7 +36,7 @@ Each of these options must appear first on the command line.
--sq-quote::
Use 'git rev-parse' in shell quoting mode (see SQ-QUOTE
section below). In contrast to the `--sq` option below, this
- mode does only quoting. Nothing else is done to command input.
+ mode only does quoting. Nothing else is done to command input.
Options for --parseopt
~~~~~~~~~~~~~~~~~~~~~~
@@ -468,8 +468,8 @@ Information
--dump-aliases::
Instead of the normal operation, dump the shorthand alias names from
- the configured alias file(s), one per line in alphabetical order. Note,
- this only includes the alias name and not its expanded email addresses.
+ the configured alias file(s), one per line in alphabetical order. Note
+ that this only includes the alias name and not its expanded email addresses.
See 'sendemail.aliasesfile' for more information about aliases.
@@ -55,7 +55,7 @@ be in a separate packet, and the list must end with a flush packet.
--force::
Usually, the command refuses to update a remote ref that
is not an ancestor of the local ref used to overwrite it.
- This flag disables the check. What this means is that
+ This flag disables the check. This means that
the remote repository can lose commits; use it with
care.
@@ -117,7 +117,7 @@ When one or more '<ref>' are specified explicitly (whether on the
command line or via `--stdin`), it can be either a
single pattern, or a pair of such pattern separated by a colon
":" (this means that a ref name cannot have a colon in it). A
-single pattern '<name>' is just a shorthand for '<name>:<name>'.
+single pattern '<name>' is just shorthand for '<name>:<name>'.
Each pattern pair consists of the source side (before the colon)
and the destination side (after the colon). The ref to be
@@ -143,9 +143,9 @@ name. See linkgit:git-rev-parse[1].
Without `--force`, the <src> ref is stored at the remote only if
<dst> does not exist, or <dst> is a proper subset (i.e. an
-ancestor) of <src>. This check, known as "fast-forward check",
-is performed in order to avoid accidentally overwriting the
-remote ref and lose other peoples' commits from there.
+ancestor) of <src>. This check, known as the "fast-forward check",
+is performed to avoid accidentally overwriting the
+remote ref and losing other people's commits from there.
With `--force`, the fast-forward check is disabled for all refs.
@@ -251,7 +251,7 @@ Submodules have more state and instead report
m the submodule has modified content
? the submodule has untracked files
-since modified content or untracked files in a submodule cannot be added
+This is since modified content or untracked files in a submodule cannot be added
via `git add` in the superproject to prepare a commit.
'm' and '?' are applied recursively. For example if a nested submodule
@@ -41,7 +41,7 @@ OPTIONS
-c::
--comment-lines::
- Prepend comment character and blank to each line. Lines will automatically
+ Prepend the comment character and a blank space to each line. Lines will automatically
be terminated with a newline. On empty lines, only the comment character
will be prepended.
@@ -19,7 +19,7 @@ no value.
OPTIONS
-------
-l::
- Cause the logical variables to be listed. In addition, all the
+ Display the logical variables. In addition, all the
variables of the Git configuration file .git/config are listed
as well. (However, the configuration variables listing functionality
is deprecated in favor of `git config -l`.)
@@ -20,7 +20,7 @@ New users are encouraged to use linkgit:git-log[1] instead. The
`whatchanged` command is essentially the same as linkgit:git-log[1]
but defaults to show the raw format diff output and to skip merges.
-The command is kept primarily for historical reasons; fingers of
+The command is primarily kept for historical reasons; fingers of
many people who learned Git long before `git log` was invented by
reading Linux kernel mailing list are trained to type it.
@@ -86,10 +86,10 @@ In the bundle format, there can be a comment following a prerequisite obj-id.
This is a comment and it has no specific meaning. The writer of the bundle MAY
put any string here. The reader of the bundle MUST ignore the comment.
-Note on the shallow clone and a Git bundle
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Note on shallow clones and Git bundles
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Note that the prerequisites does not represent a shallow-clone boundary. The
+Note that the prerequisites do not represent a shallow-clone boundary. The
semantics of the prerequisites and the shallow-clone boundaries are different,
and the Git bundle v2 format cannot represent a shallow clone repository.
@@ -345,7 +345,7 @@ for the user.
The default 'update' hook, when enabled--and with
`hooks.allowunannotated` config option unset or set to false--prevents
-unannotated tags to be pushed.
+unannotated tags from being pushed.
[[proc-receive]]
proc-receive
@@ -61,8 +61,8 @@ complete cut across the DAG, or the client has said "done".
Without multi_ack, a client sends have lines in --date-order until
the server has found a common base. That means the client will send
have lines that are already known by the server to be common, because
-they overlap in time with another branch that the server hasn't found
-a common base on yet.
+they overlap in time with another branch on which the server hasn't found
+a common base yet.
For example suppose the client has commits in caps that the server
doesn't and the server has commits in lower case that the client
@@ -135,7 +135,7 @@ to disable the feature in a backwards-compatible manner.
side-band, side-band-64k
------------------------
-This capability means that server can send, and client understand multiplexed
+This capability means that the server can send, and the client can understand, multiplexed
progress reports and error info interleaved with the packfile itself.
These two options are mutually exclusive. A modern client always
@@ -163,14 +163,14 @@ Further, with side-band and its up to 1000-byte messages, it's actually
same deal, you have up to 65519 bytes of data and 1 byte for the stream
code.
-The client MUST send only maximum of one of "side-band" and "side-
-band-64k". Server MUST diagnose it as an error if client requests
+The client MUST send only one of "side-band" and "side-
+band-64k". The server MUST diagnose it as an error if client requests
both.
ofs-delta
---------
-Server can send, and client understand PACKv2 with delta referring to
+The server can send, and the client can understand, PACKv2 with delta referring to
its base by position in pack rather than by an obj-id. That is, they can
send/read OBJ_OFS_DELTA (aka type 6) in a packfile.
@@ -252,7 +252,7 @@ the current shallow boundary, instead of the depth from remote refs.
no-progress
-----------
-The client was started with "git clone -q" or something, and doesn't
+The client was started with "git clone -q" or something similar, and doesn't
want that side band 2. Basically the client just says "I do not
wish to receive stream 2 on sideband, so do not send it to me, and if
you did, I will drop it on the floor anyway". However, the sideband
@@ -379,7 +379,7 @@ C: Place any object seen into set `advertised`.
C: Build an empty set, `common`, to hold the objects that are later
determined to be on both ends.
-C: Build a set, `want`, of the objects from `advertised` the client
+C: Build a set, `want`, of the objects from `advertised` that the client
wants to fetch, based on what it saw during ref discovery.
C: Start a queue, `c_pending`, ordered by commit time (popping newest
@@ -423,7 +423,7 @@ multiple commands. Object names MUST be given using the object format
negotiated through the `object-format` capability (default SHA-1).
The `have` list is created by popping the first 32 commits
-from `c_pending`. Less can be supplied if `c_pending` empties.
+from `c_pending`. Fewer can be supplied if `c_pending` empties.
If the client has sent 256 "have" commits and has not yet
received one of those back from `s_common`, or the client has
@@ -20,13 +20,13 @@ Gitweb provides a web interface to Git repositories. Its features include:
* Browsing every revision of the repository.
* Viewing the contents of files in the repository at any revision.
* Viewing the revision log of branches, history of files and directories,
- see what was changed when, by who.
+ seeing what was changed, when, and by whom.
* Viewing the blame/annotation details of any file (if enabled).
* Generating RSS and Atom feeds of commits, for any branch.
The feeds are auto-discoverable in modern web browsers.
* Viewing everything that was changed in a revision, and step through
revisions one at a time, viewing the history of the repository.
-* Finding commits which commit messages matches given search term.
+* Finding commits whose commit messages match a given search term.
See http://repo.or.cz/w/git.git/tree/HEAD:/gitweb/[] for gitweb source code,
browsed using gitweb itself.
@@ -104,7 +104,7 @@ by doing the following:
files in mbox format).
- Write his own patches to address issues raised on the list but
- nobody has stepped up solving. Send it out just like other
+ nobody has stepped up to solve. Send it out just like other
contributors do, and pick them up just like patches from other
contributors (see above).
@@ -417,7 +417,7 @@ are merged together, the reference to the variable newly added by
the latter topic will still use the old name in the result.
The Meta/Reintegrate script that is used by redo-jch and redo-seen
-scripts implements a crude but usable way to work this issue around.
+scripts implements a crude but usable way to work around this issue.
When the script merges branch $X, it checks if "refs/merge-fix/$X"
exists, and if so, the effect of it is squashed into the result of
the mechanical merge. In other words,
@@ -11,7 +11,7 @@ Message-ID: <BAYC1-PASMTP12374B54BA370A1E1C6E78AE4E0@CEZ.ICE>
How to use the subtree merge strategy
=====================================
-There are situations where you want to include contents in your project
+There are situations where you want to include content in your project
from an independently developed project. You can just pull from the
other project as long as there are no conflicting paths.
@@ -46,7 +46,7 @@ mind.
------------
+
Commit objects created with the above setting record the value
-of `i18n.commitEncoding` in its `encoding` header. This is to
+of `i18n.commitEncoding` in their `encoding` header. This is to
help other people who look at them later. Lack of this header
implies that the commit log message is encoded in UTF-8.
@@ -32,10 +32,10 @@ have special meaning:
- `+` is used to "open a new tab"
- `,` is used to "open a new vertical split"
- `/` is used to "open a new horizontal split"
- - `@` is used to indicate which is the file containing the final version after
+ - `@` is used to indicate the file containing the final version after
solving the conflicts. If not present, `MERGED` will be used by default.
-The precedence of the operators is this one (you can use parentheses to change
+The precedence of the operators is as follows (you can use parentheses to change
it):
`@` > `+` > `/` > `,`
@@ -102,4 +102,4 @@ stateless request, receive an application-specific
response, and disconnect. It is a one round trip facility for
querying the server. The Simple-IPC routines hide the socket,
named pipe, and thread pool details and allow the application
-layer to focus on the application at hand.
+layer to focus on the task at hand.
@@ -114,7 +114,7 @@ result in an empty bitmap (no bits set).
* N entries with compressed bitmaps, one for each indexed commit
+
-Where `N` is the total amount of entries in this bitmap index.
+Where `N` is the total number of entries in this bitmap index.
Each entry contains the following:
** {empty}
@@ -185,7 +185,7 @@ quite straightforward: for each parallel-eligible entry, the main
process must remove all files that prevent this entry from being written
(before enqueueing it). This includes any non-directory file in the
leading path of the entry. Later, when a worker gets assigned the entry,
-it looks again for the non-directories files and for an already existing
+it looks again for the non-directory files and for an already existing
file at the entry's path. If any of these checks finds something, the
worker knows that there was a path collision.
@@ -265,7 +265,7 @@ Future Work
- Improve the way to specify the order in which promisor remotes are
tried.
+
-For example this could allow to specify explicitly something like:
+For example this could allow specifying explicitly something like:
"When fetching from this remote, I want to use these promisor remotes
in this order, though, when pushing or fetching to that remote, I want
to use those promisor remotes in that order."
@@ -165,9 +165,9 @@ Avoiding runtime penalty
In order to avoid the above runtime penalty, post 1.4.2 Git used
to have a code that made sure the index file
-got timestamp newer than the youngest files in the index when
-there are many young files with the same timestamp as the
-resulting index file would otherwise would have by waiting
+got a timestamp newer than the youngest files in the index when
+there were many young files with the same timestamp as the
+resulting index file otherwise would have by waiting
before finishing writing the index file out.
I suspected that in practice the situation where many paths in the
@@ -115,7 +115,7 @@ Varint encoding
Varint encoding is identical to the ofs-delta encoding method used
within pack files.
-Decoder works such as:
+Decoder works as follows:
....
val = buf[ptr] & 0x7f
@@ -6,9 +6,9 @@ address of the remote server, and the path to the repository.
Depending on the transport protocol, some of this information may be
absent.
-Git supports ssh, git, http, and https protocols (in addition, ftp,
+Git supports ssh, git, http, and https protocols (in addition, ftp
and ftps can be used for fetching, but this is inefficient and
-deprecated; do not use it).
+deprecated; do not use them).
The native transport (i.e. git:// URL) does no authentication and
should be used with caution on unsecured networks.