@@ -54,3 +54,9 @@ trace2.destinationDebug::
By default, these errors are suppressed and tracing is
silently disabled. May be overridden by the
`GIT_TRACE2_DST_DEBUG` environment variable.
+
+trace2.maxFiles::
+ Integer. When writing trace files to a target directory, do not
+ write additional traces if we would exceed this many files. Instead,
+ write a sentinel file that will block further tracing to this
+ directory. Defaults to 0, which disables this check.
@@ -265,4 +265,21 @@ test_expect_success JSON_PP 'using global config, event stream, error event' '
test_cmp expect actual
'
+test_expect_success 'discard traces when there are too many files' '
+ mkdir trace_target_dir &&
+ test_when_finished "rm -r trace_target_dir" &&
+ (
+ GIT_TRACE2_MAX_FILES=5 &&
+ export GIT_TRACE2_MAX_FILES &&
+ cd trace_target_dir &&
+ test_seq $GIT_TRACE2_MAX_FILES >../expected_filenames.txt &&
+ xargs touch <../expected_filenames.txt &&
+ cd .. &&
+ GIT_TRACE2_EVENT="$(pwd)/trace_target_dir" test-tool trace2 001return 0
+ ) &&
+ echo git-trace2-discard >>expected_filenames.txt &&
+ ls trace_target_dir >ls_output.txt &&
+ test_cmp expected_filenames.txt ls_output.txt
+'
+
test_done
@@ -8,6 +8,19 @@
*/
#define MAX_AUTO_ATTEMPTS 10
+/*
+ * Sentinel file used to detect when we should discard new traces to avoid
+ * writing too many trace files to a directory.
+ */
+#define DISCARD_SENTINEL_NAME "git-trace2-discard"
+
+/*
+ * When set to zero, disables directory file count checks. Otherwise, controls
+ * how many files we can write to a directory before entering discard mode.
+ * This can be overridden via the TR2_SYSENV_MAX_FILES setting.
+ */
+static int tr2env_max_files = 0;
+
static int tr2_dst_want_warning(void)
{
static int tr2env_dst_debug = -1;
@@ -32,6 +45,67 @@ void tr2_dst_trace_disable(struct tr2_dst *dst)
dst->need_close = 0;
}
+/*
+ * Check to make sure we're not overloading the target directory with too many
+ * files. First get the threshold (if present) from the config or envvar. If
+ * it's zero or unset, disable this check. Next check for the presence of a
+ * sentinel file, then check file count. If we are overloaded, create the
+ * sentinel file if it doesn't already exist.
+ *
+ * We expect that some trace processing system is gradually collecting files
+ * from the target directory; after it removes the sentinel file we'll start
+ * writing traces again.
+ */
+static int tr2_dst_too_many_files(const char *tgt_prefix)
+{
+ int file_count = 0, max_files = 0, ret = 0;
+ const char *max_files_var;
+ DIR *dirp;
+ struct strbuf path = STRBUF_INIT, sentinel_path = STRBUF_INIT;
+ struct stat statbuf;
+
+ /* Get the config or envvar and decide if we should continue this check */
+ max_files_var = tr2_sysenv_get(TR2_SYSENV_MAX_FILES);
+ if (max_files_var && *max_files_var && ((max_files = atoi(max_files_var)) >= 0))
+ tr2env_max_files = max_files;
+
+ if (!tr2env_max_files) {
+ ret = 0;
+ goto cleanup;
+ }
+
+ strbuf_addstr(&path, tgt_prefix);
+ if (!is_dir_sep(path.buf[path.len - 1])) {
+ strbuf_addch(&path, '/');
+ }
+
+ /* check sentinel */
+ strbuf_addbuf(&sentinel_path, &path);
+ strbuf_addstr(&sentinel_path, DISCARD_SENTINEL_NAME);
+ if (!stat(sentinel_path.buf, &statbuf)) {
+ ret = 1;
+ goto cleanup;
+ }
+
+ /* check file count */
+ dirp = opendir(path.buf);
+ while (file_count < tr2env_max_files && dirp && readdir(dirp))
+ file_count++;
+ if (dirp)
+ closedir(dirp);
+
+ if (file_count >= tr2env_max_files) {
+ creat(sentinel_path.buf, 0666);
+ ret = 1;
+ goto cleanup;
+ }
+
+cleanup:
+ strbuf_release(&path);
+ strbuf_release(&sentinel_path);
+ return ret;
+}
+
static int tr2_dst_try_auto_path(struct tr2_dst *dst, const char *tgt_prefix)
{
int fd;
@@ -50,6 +124,16 @@ static int tr2_dst_try_auto_path(struct tr2_dst *dst, const char *tgt_prefix)
strbuf_addstr(&path, sid);
base_path_len = path.len;
+ if (tr2_dst_too_many_files(tgt_prefix)) {
+ strbuf_release(&path);
+ if (tr2_dst_want_warning())
+ warning("trace2: not opening %s trace file due to too "
+ "many files in target directory %s",
+ tr2_sysenv_display_name(dst->sysenv_var),
+ tgt_prefix);
+ return 0;
+ }
+
for (attempt_count = 0; attempt_count < MAX_AUTO_ATTEMPTS; attempt_count++) {
if (attempt_count > 0) {
strbuf_setlen(&path, base_path_len);
@@ -49,6 +49,9 @@ static struct tr2_sysenv_entry tr2_sysenv_settings[] = {
"trace2.perftarget" },
[TR2_SYSENV_PERF_BRIEF] = { "GIT_TRACE2_PERF_BRIEF",
"trace2.perfbrief" },
+
+ [TR2_SYSENV_MAX_FILES] = { "GIT_TRACE2_MAX_FILES",
+ "trace2.maxfiles" },
};
/* clang-format on */
@@ -24,6 +24,8 @@ enum tr2_sysenv_variable {
TR2_SYSENV_PERF,
TR2_SYSENV_PERF_BRIEF,
+ TR2_SYSENV_MAX_FILES,
+
TR2_SYSENV_MUST_BE_LAST
};
trace2 can write files into a target directory. With heavy usage, this directory can fill up with files, causing difficulty for trace-processing systems. This patch adds a config option (trace2.maxFiles) to set a maximum number of files that trace2 will write to a target directory. The following behavior is enabled when the maxFiles is set to a positive integer: When trace2 would write a file to a target directory, first check whether or not the traces should be discarded. Traces should be discarded if: * there is a sentinel file declaring that there are too many files * OR, the number of files exceeds trace2.maxFiles. In the latter case, we create a sentinel file named git-trace2-discard to speed up future checks. The assumption is that a separate trace-processing system is dealing with the generated traces; once it processes and removes the sentinel file, it should be safe to generate new trace files again. The default value for trace2.maxFiles is zero, which disables the file count check. The config can also be overridden with a new environment variable: GIT_TRACE2_MAX_FILES. Change-Id: I8fc613e88dd99ffcdeea9d6c1f232c3670096a9e Signed-off-by: Josh Steadmon <steadmon@google.com> --- Documentation/config/trace2.txt | 6 +++ t/t0212-trace2-event.sh | 17 +++++++ trace2/tr2_dst.c | 84 +++++++++++++++++++++++++++++++++ trace2/tr2_sysenv.c | 3 ++ trace2/tr2_sysenv.h | 2 + 5 files changed, 112 insertions(+)