@@ -210,7 +210,7 @@ annotated.
. Each blame entry always starts with a line of:
- <40-byte hex sha1> <sourceline> <resultline> <num_lines>
+ <40-byte-hex-sha1> <sourceline> <resultline> <num-lines>
+
Line numbers count from 1.
@@ -52,7 +52,7 @@ OPTIONS
-s <format>::
--suffix <format>::
Specify an alternate suffix for the bugreport name, to create a file
- named 'git-bugreport-<formatted suffix>'. This should take the form of a
+ named 'git-bugreport-<formatted-suffix>'. This should take the form of a
strftime(3) format string; the current local time will be used.
--no-diagnose::
@@ -60,7 +60,7 @@ OPTIONS
Create a zip archive of supplemental information about the user's
machine, Git client, and repository state. The archive is written to the
same output directory as the bug report and is named
- 'git-diagnostics-<formatted suffix>'.
+ 'git-diagnostics-<formatted-suffix>'.
+
Without `mode` specified, the diagnostic archive will contain the default set of
statistics reported by `git diagnose`. An optional `mode` value may be specified
@@ -13,7 +13,7 @@ SYNOPSIS
'git commit-graph write' [--object-dir <dir>] [--append]
[--split[=<strategy>]] [--reachable | --stdin-packs | --stdin-commits]
[--changed-paths] [--[no-]max-new-filters <n>] [--[no-]progress]
- <split options>
+ <split-options>
DESCRIPTION
@@ -197,7 +197,7 @@ allowing access over SSH.
5. Clients should now be able to check out the project. Use the CVS 'module'
name to indicate what Git 'head' you want to check out. This also sets the
name of your newly checked-out directory, unless you tell it otherwise with
- `-d <dir_name>`. For example, this checks out 'master' branch to the
+ `-d <dir-name>`. For example, this checks out 'master' branch to the
`project-master` directory:
+
------
@@ -224,7 +224,7 @@ the database to work reliably (otherwise you need to make sure
that the database is up to date any time 'git-cvsserver' is executed).
By default it uses SQLite databases in the Git directory, named
-`gitcvs.<module_name>.sqlite`. Note that the SQLite backend creates
+`gitcvs.<module-name>.sqlite`. Note that the SQLite backend creates
temporary files in the same directory as the database file on
write so it might not be enough to grant the users using
'git-cvsserver' write access to the database file without granting
@@ -18,7 +18,7 @@ SYNOPSIS
[--allow-override=<service>] [--forbid-override=<service>]
[--access-hook=<path>] [--[no-]informative-errors]
[--inetd |
- [--listen=<host_or_ipaddr>] [--port=<n>]
+ [--listen=<host-or-ipaddr>] [--port=<n>]
[--user=<user> [--group=<group>]]]
[--log-destination=(stderr|syslog|none)]
[<directory>...]
@@ -86,10 +86,10 @@ OPTIONS
Incompatible with --detach, --port, --listen, --user and --group
options.
---listen=<host_or_ipaddr>::
+--listen=<host-or-ipaddr>::
Listen on a specific IP address or hostname. IP addresses can
be either an IPv4 address or an IPv6 address if supported. If IPv6
- is not supported, then --listen=hostname is also not supported and
+ is not supported, then --listen=<hostname> is also not supported and
--listen must be given an IPv4 address.
Can be given more than once.
Incompatible with `--inetd` option.
@@ -45,7 +45,7 @@ OPTIONS
-s <format>::
--suffix <format>::
Specify an alternate suffix for the diagnostics archive name, to create
- a file named 'git-diagnostics-<formatted suffix>'. This should take the
+ a file named 'git-diagnostics-<formatted-suffix>'. This should take the
form of a strftime(3) format string; the current local time will be
used.
@@ -745,11 +745,11 @@ paths for a commit are encouraged to do so.
`notemodify`
^^^^^^^^^^^^
-Included in a `commit` `<notes_ref>` command to add a new note
+Included in a `commit` `<notes-ref>` command to add a new note
annotating a `<commit-ish>` or change this annotation contents.
Internally it is similar to filemodify 100644 on `<commit-ish>`
path (maybe split into subdirectories). It's not advised to
-use any other commands to write to the `<notes_ref>` tree except
+use any other commands to write to the `<notes-ref>` tree except
`filedeleteall` to delete all existing notes in this tree.
This command has two different means of specifying the content
of the note.
@@ -186,8 +186,8 @@ origin:
------------------------------------------------
$ git fetch origin --prune --prune-tags
$ git fetch origin --prune 'refs/tags/*:refs/tags/*'
-$ git fetch <url of origin> --prune --prune-tags
-$ git fetch <url of origin> --prune 'refs/tags/*:refs/tags/*'
+$ git fetch <url-of-origin> --prune --prune-tags
+$ git fetch <url-of-origin> --prune 'refs/tags/*:refs/tags/*'
------------------------------------------------
OUTPUT
@@ -14,7 +14,7 @@ SYNOPSIS
[--msg-filter <command>] [--commit-filter <command>]
[--tag-name-filter <command>] [--prune-empty]
[--original <namespace>] [-d <directory>] [-f | --force]
- [--state-branch <branch>] [--] [<rev-list options>...]
+ [--state-branch <branch>] [--] [<rev-list-options>...]
WARNING
-------
@@ -32,7 +32,7 @@ listed there as reasonably possible.
DESCRIPTION
-----------
Lets you rewrite Git revision history by rewriting the branches mentioned
-in the <rev-list options>, applying custom filters on each revision.
+in the <rev-list-options>, applying custom filters on each revision.
Those filters can modify each tree (e.g. removing a file or running
a perl rewrite on all files) or information about each commit.
Otherwise, all information (including original commit times or merge
@@ -624,7 +624,7 @@ with:
real backup; it dereferences tags first.)
** Running git-filter-branch with either --tags or --all in your
- <rev-list options>. In order to retain annotated tags as
+ <rev-list-options>. In order to retain annotated tags as
annotated, you must use --tag-name-filter (and must not have
restored from refs/original/ in a previously botched rewrite).
@@ -17,10 +17,10 @@ SYNOPSIS
[--signature-file=<file>]
[-n | --numbered | -N | --no-numbered]
[--start-number <n>] [--numbered-files]
- [--in-reply-to=<message id>] [--suffix=.<sfx>]
+ [--in-reply-to=<message-id>] [--suffix=.<sfx>]
[--ignore-if-in-upstream] [--always]
[--cover-from-description=<mode>]
- [--rfc] [--subject-prefix=<subject prefix>]
+ [--rfc] [--subject-prefix=<subject-prefix>]
[(--reroll-count|-v) <n>]
[--to=<email>] [--cc=<email>]
[--[no-]cover-letter] [--quiet]
@@ -30,8 +30,8 @@ SYNOPSIS
[--range-diff=<previous> [--creation-factor=<percent>]]
[--filename-max-length=<n>]
[--progress]
- [<common diff options>]
- [ <since> | <revision range> ]
+ [<common-diff-options>]
+ [ <since> | <revision-range> ]
DESCRIPTION
-----------
@@ -64,7 +64,7 @@ There are two ways to specify which commits to operate on.
to the tip of the current branch that are not in the history
that leads to the <since> to be output.
-2. Generic <revision range> expression (see "SPECIFYING
+2. Generic <revision-range> expression (see "SPECIFYING
REVISIONS" section in linkgit:gitrevisions[7]) means the
commits in the specified range.
@@ -179,9 +179,9 @@ Beware that the default for 'git send-email' is to thread emails
itself. If you want `git format-patch` to take care of threading, you
will want to ensure that threading is disabled for `git send-email`.
---in-reply-to=<message id>::
+--in-reply-to=<message-id>::
Make the first mail (or all the mails with `--no-thread`) appear as a
- reply to the given <message id>, which avoids breaking threads to
+ reply to the given <message-id>, which avoids breaking threads to
provide a new patch series.
--ignore-if-in-upstream::
@@ -219,9 +219,9 @@ populated with placeholder text.
Use the contents of <file> instead of the branch's description
for generating the cover letter.
---subject-prefix=<subject prefix>::
+--subject-prefix=<subject-prefix>::
Instead of the standard '[PATCH]' prefix in the subject
- line, instead use '[<subject prefix>]'. This can be used
+ line, instead use '[<subject-prefix>]'. This can be used
to name a patch series, and can be combined with the
`--numbered` option.
+
@@ -403,7 +403,7 @@ you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`.
`format.useAutoBase` configuration.
--root::
- Treat the revision argument as a <revision range>, even if it
+ Treat the revision argument as a <revision-range>, even if it
is just a single commit (that would normally be treated as a
<since>). Note that root commits included in the specified
range are always formatted as creation patches, independently
@@ -16,7 +16,7 @@ DESCRIPTION
Move or rename a file, directory, or symlink.
git mv [-v] [-f] [-n] [-k] <source> <destination>
- git mv [-v] [-f] [-n] [-k] <source> ... <destination directory>
+ git mv [-v] [-f] [-n] [-k] <source> ... <destination-directory>
In the first form, it renames <source>, which must exist and be either
a file, symlink or directory, to <destination>.
@@ -56,7 +56,7 @@ SUBCOMMANDS
list::
List the notes object for a given object. If no object is
given, show a list of all note objects and the objects they
- annotate (in the format "<note object> <annotated object>").
+ annotate (in the format "<note-object> <annotated-object>").
This is the default subcommand if no subcommand is given.
add::
@@ -114,11 +114,11 @@ FORMATS
The following formats are available:
* 'short':
- <replaced sha1>
+ <replaced-sha1>
* 'medium':
- <replaced sha1> -> <replacement sha1>
+ <replaced-sha1> -> <replacement-sha1>
* 'long':
- <replaced sha1> (<replaced type>) -> <replacement sha1> (<replacement type>)
+ <replaced-sha1> (<replaced-type>) -> <replacement-sha1> (<replacement-type>)
CREATING REPLACEMENT OBJECTS
----------------------------
@@ -116,7 +116,7 @@ include::rerere-options.txt[]
--reference::
Instead of starting the body of the log message with "This
- reverts <full object name of the commit being reverted>.",
+ reverts <full-object-name-of-the-commit-being-reverted>.",
refer to the commit using "--pretty=reference" format
(cf. linkgit:git-log[1]). The `revert.reference`
configuration variable can be used to enable this option by
@@ -149,7 +149,7 @@ While git creates a basic commit message automatically, it is
_strongly_ recommended to explain why the original commit is being
reverted.
In addition, repeatedly reverting reverts will result in increasingly
-unwieldy subject lines, for example 'Reapply "Reapply "<original subject>""'.
+unwieldy subject lines, for example 'Reapply "Reapply "<original-subject>""'.
Please consider rewording these to be shorter and more unique.
CONFIGURATION
@@ -10,7 +10,7 @@ SYNOPSIS
--------
[verse]
'git send-email' [<options>] <file|directory>...
-'git send-email' [<options>] <format-patch options>
+'git send-email' [<options>] <format-patch-options>
'git send-email' --dump-aliases
@@ -309,7 +309,7 @@ Line Notes
------------------------------------------------------------
# branch.oid <commit> | (initial) Current commit.
# branch.head <branch> | (detached) Current branch.
-# branch.upstream <upstream_branch> If upstream is set.
+# branch.upstream <upstream-branch> If upstream is set.
# branch.ab +<ahead> -<behind> If upstream is set and
the commit is present.
------------------------------------------------------------
@@ -502,7 +502,7 @@ results, so it could be faster on subsequent runs.
usually worth the additional size.
* `core.untrackedCache=true` and `core.fsmonitor=true` or
- `core.fsmonitor=<hook_command_pathname>` (see
+ `core.fsmonitor=<hook-command-pathname>` (see
linkgit:git-update-index[1]): enable both the untracked cache
and FSMonitor features and only search directories that have
been modified since the previous `git status` command. This
@@ -136,7 +136,7 @@ If you really want to remove a submodule from the repository and commit
that use linkgit:git-rm[1] instead. See linkgit:gitsubmodules[7] for removal
options.
-update [--init] [--remote] [-N|--no-fetch] [--[no-]recommend-shallow] [-f|--force] [--checkout|--rebase|--merge] [--reference <repository>] [--depth <depth>] [--recursive] [--jobs <n>] [--[no-]single-branch] [--filter <filter spec>] [--] [<path>...]::
+update [--init] [--remote] [-N|--no-fetch] [--[no-]recommend-shallow] [-f|--force] [--checkout|--rebase|--merge] [--reference <repository>] [--depth <depth>] [--recursive] [--jobs <n>] [--[no-]single-branch] [--filter <filter-spec>] [--] [<path>...]::
+
--
Update the registered submodules to match what the superproject
@@ -185,7 +185,7 @@ submodule with the `--init` option.
If `--recursive` is specified, this command will recurse into the
registered submodules, and update any nested submodules within.
-If `--filter <filter spec>` is specified, the given partial clone filter will be
+If `--filter <filter-spec>` is specified, the given partial clone filter will be
applied to the submodule. See linkgit:git-rev-list[1] for details on filter
specifications.
--
@@ -37,12 +37,12 @@ COMMANDS
argument. Normally this command initializes the current
directory.
--T<trunk_subdir>;;
---trunk=<trunk_subdir>;;
--t<tags_subdir>;;
---tags=<tags_subdir>;;
--b<branches_subdir>;;
---branches=<branches_subdir>;;
+-T<trunk-subdir>;;
+--trunk=<trunk-subdir>;;
+-t<tags-subdir>;;
+--tags=<tags-subdir>;;
+-b<branches-subdir>;;
+--branches=<branches-subdir>;;
-s;;
--stdlayout;;
These are optional command-line options for init. Each of
@@ -726,9 +726,9 @@ ADVANCED OPTIONS
when tracking a single URL. The 'log' and 'dcommit' commands
no longer require this switch as an argument.
--R<remote name>::
---svn-remote <remote name>::
- Specify the [svn-remote "<remote name>"] section to use,
+-R<remote-name>::
+--svn-remote <remote-name>::
+ Specify the [svn-remote "<remote-name>"] section to use,
this allows SVN multiple repositories to be tracked.
Default: "svn"
@@ -224,7 +224,7 @@ it in the repository configuration as follows:
-------------------------------------
[user]
- signingKey = <gpg-key_id>
+ signingKey = <gpg-key-id>
-------------------------------------
`pager.tag` is only respected when listing tags, i.e., when `-l` is
@@ -838,7 +838,7 @@ of the SID and an optional counter (to avoid filename
collisions).
+
In addition, if the variable is set to
-`af_unix:[<socket_type>:]<absolute-pathname>`, Git will try
+`af_unix:[<socket-type>:]<absolute-pathname>`, Git will try
to open the path as a Unix Domain Socket. The socket type
can be either `stream` or `dgram`.
+
@@ -245,20 +245,20 @@ diffcore-pickaxe: For Detecting Addition/Deletion of Specified String
This transformation limits the set of filepairs to those that change
specified strings between the preimage and the postimage in a certain
-way. -S<block of text> and -G<regular expression> options are used to
+way. -S<block-of-text> and -G<regular-expression> options are used to
specify different ways these strings are sought.
-"-S<block of text>" detects filepairs whose preimage and postimage
+"-S<block-of-text>" detects filepairs whose preimage and postimage
have different number of occurrences of the specified block of text.
By definition, it will not detect in-file moves. Also, when a
changeset moves a file wholesale without affecting the interesting
string, diffcore-rename kicks in as usual, and `-S` omits the filepair
(since the number of occurrences of that string didn't change in that
rename-detected filepair). When used with `--pickaxe-regex`, treat
-the <block of text> as an extended POSIX regular expression to match,
+the <block-of-text> as an extended POSIX regular expression to match,
instead of a literal string.
-"-G<regular expression>" (mnemonic: grep) detects filepairs whose
+"-G<regular-expression>" (mnemonic: grep) detects filepairs whose
textual diff has an added or a deleted line that matches the given
regular expression. This means that it will detect in-file (or what
rename-detection considers the same file) moves, which is noise. The
@@ -386,8 +386,8 @@ The remaining data of each directory block is grouped by type:
long, "REUC" extension that is M-bytes long, followed by "EOIE",
then the hash would be:
- Hash("TREE" + <binary representation of N> +
- "REUC" + <binary representation of M>)
+ Hash("TREE" + <binary-representation-of-N> +
+ "REUC" + <binary-representation-of-M>)
== Index Entry Offset Table
@@ -243,7 +243,7 @@ named remote is not being used both values will be the same.
Information about what is to be pushed is provided on the hook's standard
input with lines of the form:
- <local ref> SP <local object name> SP <remote ref> SP <remote object name> LF
+ <local-ref> SP <local-object-name> SP <remote-ref> SP <remote-object-name> LF
For instance, if the command +git push origin master:foreign+ were run the
hook would receive a line like the following:
@@ -251,9 +251,9 @@ hook would receive a line like the following:
refs/heads/master 67890 refs/heads/foreign 12345
although the full object name would be supplied. If the foreign ref does not
-yet exist the `<remote object name>` will be the all-zeroes object name. If a
-ref is to be deleted, the `<local ref>` will be supplied as `(delete)` and the
-`<local object name>` will be the all-zeroes object name. If the local commit
+yet exist the `<remote-object-name>` will be the all-zeroes object name. If a
+ref is to be deleted, the `<local-ref>` will be supplied as `(delete)` and the
+`<local-object-name>` will be the all-zeroes object name. If the local commit
was specified by something other than a name which could be expanded (such as
`HEAD~`, or an object name) it will be supplied as it was originally given.
@@ -8,7 +8,7 @@ gitk - The Git repository browser
SYNOPSIS
--------
[verse]
-'gitk' [<options>] [<revision range>] [--] [<path>...]
+'gitk' [<options>] [<revision-range>] [--] [<path>...]
DESCRIPTION
-----------
@@ -124,7 +124,7 @@ gitk-specific options
range to show. The command is expected to print on its
standard output a list of additional revisions to be shown,
one per line. Use this instead of explicitly specifying a
- '<revision range>' if the set of commits to show may vary
+ '<revision-range>' if the set of commits to show may vary
between refreshes.
--select-commit=<ref>::
@@ -378,7 +378,7 @@ fetch-pack may send "filter" commands to request a partial clone
or partial fetch and request that the server omit various objects
from the packfile.
-session-id=<session id>
+session-id=<session-id>
-----------------------
The server may advertise a session ID that can be used to identify this process
@@ -391,14 +391,14 @@ C: Start a queue, `c_pending`, ordered by commit time (popping newest
C: Send one `$GIT_URL/git-upload-pack` request:
- C: 0032want <want #1>...............................
- C: 0032want <want #2>...............................
+ C: 0032want <want-#1>...............................
+ C: 0032want <want-#2>...............................
....
- C: 0032have <common #1>.............................
- C: 0032have <common #2>.............................
+ C: 0032have <common-#1>.............................
+ C: 0032have <common-#2>.............................
....
- C: 0032have <have #1>...............................
- C: 0032have <have #2>...............................
+ C: 0032have <have-#1>...............................
+ C: 0032have <have-#2>...............................
....
C: 0000
@@ -512,7 +512,7 @@ Within the command portion of the request body clients SHOULD send
the id obtained through ref discovery as old_id.
update_request = command_list
- "PACK" <binary data>
+ "PACK" <binary-data>
command_list = PKT-LINE(command NUL cap_list LF)
*(command_pkt)
@@ -199,7 +199,7 @@ which can be used to limit the refs sent from the server.
Additional features not supported in the base command will be advertised
as the value of the command in the capability advertisement in the form
-of a space separated list of features: "<command>=<feature 1> <feature 2>"
+of a space separated list of features: "<command>=<feature-1> <feature-2>"
ls-refs takes in the following arguments:
@@ -245,7 +245,7 @@ addition of future extensions.
Additional features not supported in the base command will be advertised
as the value of the command in the capability advertisement in the form
-of a space separated list of features: "<command>=<feature 1> <feature 2>"
+of a space separated list of features: "<command>=<feature-1> <feature-2>"
A `fetch` request can take the following arguments:
@@ -363,7 +363,7 @@ can be included in the client's request as well as the potential
addition of the 'packfile-uris' section in the server's response as
explained below.
- packfile-uris <comma-separated list of protocols>
+ packfile-uris <comma-separated-list-of-protocols>
Indicates to the server that the client is willing to receive
URIs of any of the given protocols in place of objects in the
sent packfile. Before performing the connectivity check, the
@@ -534,7 +534,7 @@ with objects using hash algorithm X. If not specified, the server is assumed to
only handle SHA-1. If the client would like to use a hash algorithm other than
SHA-1, it should specify its object-format string.
-session-id=<session id>
+session-id=<session-id>
~~~~~~~~~~~~~~~~~~~~~~~
The server may advertise a session ID that can be used to identify this process
@@ -151,7 +151,7 @@ the superproject's `$GIT_DIR/config` file, so the superproject's history
is not affected. This can be undone using `git submodule init`.
* Deleted submodule: A submodule can be deleted by running
-`git rm <submodule path> && git commit`. This can be undone
+`git rm <submodule-path> && git commit`. This can be undone
using `git revert`.
+
The deletion removes the superproject's tracking data, which are
@@ -229,7 +229,7 @@ Workflow for a third party library
git submodule add <URL> <path>
# Occasionally update the submodule to a new version:
- git -C <path> checkout <new version>
+ git -C <path> checkout <new-version>
git add <path>
git commit -m "update submodule to new version"
@@ -343,7 +343,7 @@ $home_link_str::
Label for the "home link" at the top of all pages, leading to `$home_link`
(usually the main gitweb page, which contains the projects list). It is
used as the first component of gitweb's "breadcrumb trail":
- `<home link> / <project> / <action>`. Can be set at build time using
+ `<home-link> / <project> / <action>`. Can be set at build time using
the `GITWEB_HOME_LINK_STR` variable. By default it is set to "projects",
as this link leads to the list of projects. Another popular choice is to
set it to the name of site. Note that it is treated as raw HTML so it
@@ -604,9 +604,9 @@ Many gitweb features can be enabled (or disabled) and configured using the
Each `%feature` hash element is a hash reference and has the following
structure:
----------------------------------------------------------------------
-"<feature_name>" => {
- "sub" => <feature-sub (subroutine)>,
- "override" => <allow-override (boolean)>,
+"<feature-name>" => {
+ "sub" => <feature-sub-(subroutine)>,
+ "override" => <allow-override-(boolean)>,
"default" => [ <options>... ]
},
----------------------------------------------------------------------
@@ -614,7 +614,7 @@ Some features cannot be overridden per project. For those
features the structure of appropriate `%feature` hash element has a simpler
form:
----------------------------------------------------------------------
-"<feature_name>" => {
+"<feature-name>" => {
"override" => 0,
"default" => [ <options>... ]
},
@@ -305,7 +305,7 @@ pathnames. In most general form such path_info (component) based gitweb URL
looks like this:
-----------------------------------------------------------------------
-.../gitweb.cgi/<repo>/<action>/<revision_from>:/<path_from>..<revision_to>:/<path_to>?<arguments>
+.../gitweb.cgi/<repo>/<action>/<revision-from>:/<path-from>..<revision-to>:/<path-to>?<arguments>
-----------------------------------------------------------------------
@@ -5,7 +5,7 @@
* `<absolute-pathname>` - Writes to the file in append mode. If the target
already exists and is a directory, the traces will be written to files (one
per process) underneath the given directory.
-* `af_unix:[<socket_type>:]<absolute-pathname>` - Write to a
+* `af_unix:[<socket-type>:]<absolute-pathname>` - Write to a
Unix DomainSocket (on platforms that support them). Socket
type can be either `stream` or `dgram`; if omitted Git will
try both.
@@ -73,8 +73,8 @@ use will be rewritten into URLs that work), you can create a
configuration section of the form:
------------
- [url "<actual url base>"]
- insteadOf = <other url base>
+ [url "<actual-url-base>"]
+ insteadOf = <other-url-base>
------------
For example, with this:
@@ -92,8 +92,8 @@ If you want to rewrite URLs for push only, you can create a
configuration section of the form:
------------
- [url "<actual url base>"]
- pushInsteadOf = <other url base>
+ [url "<actual-url-base>"]
+ pushInsteadOf = <other-url-base>
------------
For example, with this:
@@ -4100,8 +4100,8 @@ independently of the contents or the type of the object: all objects can
be validated by verifying that (a) their hashes match the content of the
file and (b) the object successfully inflates to a stream of bytes that
forms a sequence of
-`<ascii type without space> + <space> + <ascii decimal size> +
-<byte\0> + <binary object data>`.
+`<ascii-type-without-space> + <space> + <ascii-decimal-size> +
+<byte\0> + <binary-object-data>`.
The structured objects can further have their structure and
connectivity to other objects verified. This is generally done with
@@ -22,7 +22,7 @@
N_("git commit-graph write [--object-dir <dir>] [--append]\n" \
" [--split[=<strategy>]] [--reachable | --stdin-packs | --stdin-commits]\n" \
" [--changed-paths] [--[no-]max-new-filters <n>] [--[no-]progress]\n" \
- " <split options>")
+ " <split-options>")
static const char * builtin_commit_graph_verify_usage[] = {
BUILTIN_COMMIT_GRAPH_VERIFY_USAGE,