@@ -36,7 +36,8 @@ do
else
prereq=""
fi
- test_perf $prereq "$engine log$GIT_PERF_4220_LOG_OPTS --grep='$pattern'" "
+ test_perf "$engine log$GIT_PERF_4220_LOG_OPTS --grep='$pattern'" \
+ --prereq "$prereq" "
git -c grep.patternType=$engine log --pretty=format:%h$GIT_PERF_4220_LOG_OPTS --grep='$pattern' >'out.$engine' || :
"
done
@@ -26,7 +26,8 @@ do
else
prereq=""
fi
- test_perf $prereq "$engine log$GIT_PERF_4221_LOG_OPTS --grep='$pattern'" "
+ test_perf "$engine log$GIT_PERF_4221_LOG_OPTS --grep='$pattern'" \
+ --prereq "$prereq" "
git -c grep.patternType=$engine log --pretty=format:%h$GIT_PERF_4221_LOG_OPTS --grep='$pattern' >'out.$engine' || :
"
done
@@ -26,9 +26,8 @@ test_expect_success 'set up thread-counting tests' '
done
'
-test_perf PERF_EXTRA 'index-pack 0 threads' '
- rm -rf repo.git &&
- git init --bare repo.git &&
+test_perf 'index-pack 0 threads' --prereq PERF_EXTRA \
+ --setup 'rm -rf repo.git && git init --bare repo.git' '
GIT_DIR=repo.git git index-pack --threads=1 --stdin < $PACK
'
@@ -36,17 +35,15 @@ for t in $threads
do
THREADS=$t
export THREADS
- test_perf PERF_EXTRA "index-pack $t threads" '
- rm -rf repo.git &&
- git init --bare repo.git &&
+ test_perf "index-pack $t threads" --prereq PERF_EXTRA \
+ --setup 'rm -rf repo.git && git init --bare repo.git' '
GIT_DIR=repo.git GIT_FORCE_THREADS=1 \
git index-pack --threads=$THREADS --stdin <$PACK
'
done
-test_perf 'index-pack default number of threads' '
- rm -rf repo.git &&
- git init --bare repo.git &&
+test_perf 'index-pack default number of threads' \
+ --setup 'rm -rf repo.git && git init --bare repo.git' '
GIT_DIR=repo.git git index-pack --stdin < $PACK
'
@@ -60,18 +60,6 @@ then
esac
fi
-if test -n "$GIT_PERF_7519_DROP_CACHE"
-then
- # When using GIT_PERF_7519_DROP_CACHE, GIT_PERF_REPEAT_COUNT must be 1 to
- # generate valid results. Otherwise the caching that happens for the nth
- # run will negate the validity of the comparisons.
- if test "$GIT_PERF_REPEAT_COUNT" -ne 1
- then
- echo "warning: Setting GIT_PERF_REPEAT_COUNT=1" >&2
- GIT_PERF_REPEAT_COUNT=1
- fi
-fi
-
trace_start() {
if test -n "$GIT_PERF_7519_TRACE"
then
@@ -167,10 +155,10 @@ setup_for_fsmonitor() {
test_perf_w_drop_caches () {
if test -n "$GIT_PERF_7519_DROP_CACHE"; then
- test-tool drop-caches
+ test_perf "$1" --setup "test-tool drop-caches" "$2"
+ else
+ test_perf "$@"
fi
-
- test_perf "$@"
}
test_fsmonitor_suite() {
@@ -49,13 +49,15 @@ do
fi
if ! test_have_prereq PERF_GREP_ENGINES_THREADS
then
- test_perf $prereq "$engine grep$GIT_PERF_7820_GREP_OPTS '$pattern'" "
+ test_perf "$engine grep$GIT_PERF_7820_GREP_OPTS '$pattern'" \
+ --prereq "$prereq" "
git -c grep.patternType=$engine grep$GIT_PERF_7820_GREP_OPTS -- '$pattern' >'out.$engine' || :
"
else
for threads in $GIT_PERF_GREP_THREADS
do
- test_perf PTHREADS,$prereq "$engine grep$GIT_PERF_7820_GREP_OPTS '$pattern' with $threads threads" "
+ test_perf "$engine grep$GIT_PERF_7820_GREP_OPTS '$pattern' with $threads threads"
+ --prereq PTHREADS,$prereq "
git -c grep.patternType=$engine -c grep.threads=$threads grep$GIT_PERF_7820_GREP_OPTS -- '$pattern' >'out.$engine.$threads' || :
"
done
@@ -189,19 +189,38 @@ exit $ret' >&3 2>&4
}
test_wrapper_ () {
- test_wrapper_func_=$1; shift
+ local test_wrapper_func_=$1; shift
+ local test_title_=$1; shift
test_start_
- test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq=
- test "$#" = 2 ||
- BUG "not 2 or 3 parameters to test-expect-success"
+ test_prereq=
+ test_perf_setup_=
+ while test $# != 0
+ do
+ case $1 in
+ --prereq)
+ test_prereq=$2
+ shift
+ ;;
+ --setup)
+ test_perf_setup_=$2
+ shift
+ ;;
+ *)
+ break
+ ;;
+ esac
+ shift
+ done
+ test "$#" = 1 || BUG "test_wrapper_ needs 2 positional parameters"
export test_prereq
- if ! test_skip "$@"
+ export test_perf_setup_
+ if ! test_skip "$test_title_" "$@"
then
base=$(basename "$0" .sh)
echo "$test_count" >>"$perf_results_dir"/$base.subtests
echo "$1" >"$perf_results_dir"/$base.$test_count.descr
base="$perf_results_dir"/"$PERF_RESULTS_PREFIX$(basename "$0" .sh)"."$test_count"
- "$test_wrapper_func_" "$@"
+ "$test_wrapper_func_" "$test_title_" "$@"
fi
test_finish_
@@ -214,6 +233,16 @@ test_perf_ () {
echo "perf $test_count - $1:"
fi
for i in $(test_seq 1 $GIT_PERF_REPEAT_COUNT); do
+ if test -n "$test_perf_setup_"
+ then
+ say >&3 "setup: $test_perf_setup_"
+ if ! test_eval_ $test_perf_setup_
+ then
+ test_failure_ "$test_perf_setup_"
+ break
+ fi
+
+ fi
say >&3 "running: $2"
if test_run_perf_ "$2"
then
@@ -237,11 +266,24 @@ test_perf_ () {
rm test_time.*
}
+# Usage: test_perf 'title' [options] 'perf-test'
+# Run the performance test script specified in perf-test with
+# optional prerequisite and setup steps.
+# Options:
+# --prereq prerequisites: Skip the test if prequisites aren't met
+# --setup "setup-steps": Run setup steps prior to each measured iteration
+#
test_perf () {
test_wrapper_ test_perf_ "$@"
}
test_size_ () {
+ if test -n "$test_perf_setup_"
+ then
+ say >&3 "setup: $test_perf_setup_"
+ test_eval_ $test_perf_setup_
+ fi
+
say >&3 "running: $2"
if test_eval_ "$2" 3>"$base".result; then
test_ok_ "$1"
@@ -250,6 +292,14 @@ test_size_ () {
fi
}
+# Usage: test_size 'title' [options] 'size-test'
+# Run the size test script specified in size-test with optional
+# prerequisites and setup steps. Returns the numeric value
+# returned by size-test.
+# Options:
+# --prereq prerequisites: Skip the test if prequisites aren't met
+# --setup "setup-steps": Run setup steps prior to the size measurement
+
test_size () {
test_wrapper_ test_size_ "$@"
}