mbox series

[v3,0/4] arm64: dts: imx8: add cm40 and cm40_uart

Message ID 20240305-m4_lpuart-v3-0-592463ef1d22@nxp.com (mailing list archive)
Headers show
Series arm64: dts: imx8: add cm40 and cm40_uart | expand

Message

Frank Li March 5, 2024, 3:54 p.m. UTC 
Add cm40 subsystem.
Add cm40_lpuart and lpurt1 for 8dxl evk boards.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v3:
- Add Alexander review tags
- move interrupt-parent below range.
- move interrupt-parent before interrutps at intmux node
- Link to v2: https://lore.kernel.org/r/20240302-m4_lpuart-v2-0-89a5952043b6@nxp.com

Changes in v2:
- commit message "Adding" to Add
- fixed regulator@101 warning
- remove 'modem reset'
- order nodes by access
- move interrupt-parent under top bus
- clean up other dtb check warning
- Link to v1: https://lore.kernel.org/r/20240228-m4_lpuart-v1-0-9e6947be15e7@nxp.com

---
Alice Guo (1):
      arm64: dts: imx8dxl: add lpuart device in cm40 subsystem

Dong Aisheng (1):
      arm64: dts: imx8: add cm40 subsystem dtsi

Frank Li (2):
      arm64: dts: imx8dxl: update cm40 irq number informaiton
      dts: arm64: imx8dxl-evk: add lpuart1 and cm40 uart

 arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi | 91 +++++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts   | 37 ++++++++++
 arch/arm64/boot/dts/freescale/imx8dxl.dtsi      | 13 ++++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi      |  1 +
 4 files changed, 142 insertions(+)
---
base-commit: 9acc053fc8f256959e849cb6588a054074daebcd
change-id: 20240228-m4_lpuart-30791c032f2a

Best regards,