mbox series

[v3,00/10] arm64: dts: imx8qm Add audio\flexcan\i2c\fec1 nodes for imx8qm-mek board

Message ID 20240422-dts_8qm_audio-v3-0-680cee731ced@nxp.com (mailing list archive)
Headers show
Series arm64: dts: imx8qm Add audio\flexcan\i2c\fec1 nodes for imx8qm-mek board | expand

Message

Frank Li April 22, 2024, 7:50 p.m. UTC 
No new warning added by 
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8  CHECK_DTBS=y freescale/imx8qm-mek.dtb

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v3:
- sensor use general name
- use tab in pinctrl
- remove extra space for fsl,asrc-rate
- change to bt_sco_codec: audio-codec-bt
-	audio-routing = "Headphone Jack", "HP_L",
    ++                          "Headphone Jack", "HP_R",
    ++                          "Ext Spk", "SPK_LP",
    ++                          "Ext Spk", "SPK_LN",
    ++                          "Ext Spk", "SPK_RP",
    ++                          "Ext Spk", "SPK_RN",
    ++                          "LINPUT1", "Mic Jack",
    ++                          "Mic Jack", "MICB";

- align clock under sai
- remove unused "FIXME: .."
- Link to v2: https://lore.kernel.org/r/20240418-dts_8qm_audio-v2-0-e40fe76b60a6@nxp.com

Changes in v2:
- move vendor property to last, just before status
- use audio-codec@1a as node name
- about dual license problem, need relicense whole included tree's dts file
which out scope this patch
- About delete-node

imx8qm-ss-audio.dtsi are not supposed to be included directly. imx8qm.dtsi
is supposed to be included by other board dts file.

in imx8qm.dtsi

 	/* sorted in register address */
+	#include "imx8-ss-audio.dtsi"
 	#include "imx8-ss-vpu.dtsi"
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-dma.dtsi"
@@ -473,3 +558,4 @@ drc_crit0: trip1 {
 #include "imx8qm-ss-dma.dtsi"
 #include "imx8qm-ss-conn.dtsi"
 #include "imx8qm-ss-lsio.dtsi"
+#include "imx8qm-ss-audio.dtsi"

"imx8qm-ss-audio" will overwrite some common audio node in
"imx8-ss-audio.dtsi"

acm, and sai4/5 are defined in imx8-ss-audio.dtsi for common part for all
imx8qm\imx8qxp\imx8dxl.

- Link to v1: https://lore.kernel.org/r/20240415-dts_8qm_audio-v1-0-2976c35a0c52@nxp.com

---
Frank Li (10):
      arm64: dts: imx8-ss-audio: remove memory-region = <&dsp_reserved>;
      arm64: dts: imx8qm-ss-audio: add audio nodes
      arm64: dts: imx8qm-mek: add sai and wm8960 support
      arm64: dts: imx8x: add cm41 subsystem dtsi
      arm64: dts: imx8qm-mek: add i2c0 and children devices
      arm64: dts: imx8qm-mek: add cm41_i2c and children devices
      arm64: dts: imx8qm-mek: add flexcan support
      arm64: dts: imx8qm-mek: add lsio mu5 and mu6
      arm64: dts: imx8qm: add ocopt and fec_mac[0,1]
      arm64: dts: imx8qm-mek: add fec2 support

 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi   |   1 -
 arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi    |  68 +++
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts       | 344 +++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi | 473 +++++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm.dtsi          | 102 +++++
 5 files changed, 987 insertions(+), 1 deletion(-)
---
base-commit: eda9714fe6d9e6e5690992ce7dd42b13a5be7803
change-id: 20240402-dts_8qm_audio-e1e1697c9bf6

Best regards,
---
Frank Li <Frank.Li@nxp.com>