[v3,0/6] add USB2.0 support for i.MX95-19x19 EVK board

Message

Xu Yang Feb. 27, 2025, 9:53 a.m. UTC

The i.MX95-19x19 EVK board features a USB 2.0 Type-A port, with this
series primarily introducing USB 2.0 support. In the i.MX95 architecture,
the USB wake-up handling mechanism is integrated within the HSIO block
control module, utilizing a dedicated wake-up interrupt. Therefore, we
also implemented corresponding wake-up logic code to properly manage this
functionality.

For detailed changes can refer to patch commit log.

v3:
 - fix possible build break
 - remove usbmisc_imx95_init()
 - add Rb tag in some patches

v2:
 - apply some suggestions
 - improve wakeup interrupt handling
 - add Rb tag in some patches

Xu Yang (6):
  dt-bindings: usb: chipidea: Add i.MX95 compatible string
    'fsl,imx95-usb'
  dt-bindings: usb: usbmisc-imx: add support for i.MX95 platform
  usb: chipidea: imx: add wakeup interrupt handling
  usb: chipidea: imx: add HSIO Block Control wakeup setting
  arm64: dts: imx95: add USB2.0 nodes
  arm64: dts: imx95-19x19-evk: enable USB2.0 node

 .../bindings/usb/chipidea,usb2-common.yaml    |  3 +
 .../bindings/usb/chipidea,usb2-imx.yaml       | 24 ++++++-
 .../devicetree/bindings/usb/fsl,usbmisc.yaml  | 23 +++++-
 .../boot/dts/freescale/imx95-19x19-evk.dts    | 16 +++++
 arch/arm64/boot/dts/freescale/imx95.dtsi      | 30 ++++++++
 drivers/usb/chipidea/ci_hdrc_imx.c            | 33 +++++++++
 drivers/usb/chipidea/usbmisc_imx.c            | 72 +++++++++++++++++++
 7 files changed, 199 insertions(+), 2 deletions(-)