Show patches with: none      |   4881 patches
« 1 2 ... 14 15 16 … 48 49 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[net-next,01/11] dt-bindings: net: add compatible string for i.MX95 EMDIO add basic support for i.MX95 NETC - - - --- 2024-10-09 Wei Fang Superseded
PCI: Add NXP NETC vendor ID and device IDs PCI: Add NXP NETC vendor ID and device IDs - - - --- 2024-10-09 Wei Fang New
[v3,net,3/3] net: enetc: disable IRQ after Rx and Tx BD rings are disabled net: enetc: fix some issues of XDP - - - --- 2024-10-09 Wei Fang Superseded
[v3,net,2/3] net: enetc: fix the issues of XDP_REDIRECT feature net: enetc: fix some issues of XDP - - - --- 2024-10-09 Wei Fang Superseded
[v3,net,1/3] net: enetc: remove xdp_drops statistic from enetc_xdp_drop() net: enetc: fix some issues of XDP - 2 - --- 2024-10-09 Wei Fang Superseded
phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check - - - --- 2024-10-09 Richard Zhu New
[2/2] drm: bridge: ldb: Configure LDB clock in .mode_set [1/2] clk: imx: clk-imx8mp: Allow LDB serializer clock reconfigure parent rate - - 1 --- 2024-10-08 Marek Vasut New
[1/2] clk: imx: clk-imx8mp: Allow LDB serializer clock reconfigure parent rate [1/2] clk: imx: clk-imx8mp: Allow LDB serializer clock reconfigure parent rate - 1 - --- 2024-10-08 Marek Vasut New
[v4,3/3] PCI: imx6: Remove cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-10-08 Frank Li Superseded
[v4,2/3] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup() PCI: dwc: opitimaze RC host pci_fixup_addr() - - - --- 2024-10-08 Frank Li Superseded
[v4,1/3] of: address: Add parent_bus_addr to struct of_pci_range PCI: dwc: opitimaze RC host pci_fixup_addr() - 1 - --- 2024-10-08 Frank Li Superseded
[v8,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle [v8,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle - 1 - --- 2024-10-08 Frank Li In Next
[v2,4/4] dmaengine: Unify checks in dma_request_chan() dmaengine: dma_request_chan*() amendments - - - --- 2024-10-08 Andy Shevchenko New
[v2,3/4] dmaengine: Add a comment on why it's okay when kasprintf() fails dmaengine: dma_request_chan*() amendments - - - --- 2024-10-08 Andy Shevchenko New
[v2,2/4] dmaengine: Use dma_request_channel() instead of __dma_request_channel() dmaengine: dma_request_chan*() amendments - - - --- 2024-10-08 Andy Shevchenko New
[v2,1/4] dmaengine: Replace dma_request_slave_channel() by dma_request_chan() dmaengine: dma_request_chan*() amendments - - - --- 2024-10-08 Andy Shevchenko New
[v7,3/3] i3c: master: Fix dynamic address leak when 'assigned-address' is present I3C: master: fix the address assign issue if assign-address is exist in dts - 1 - --- 2024-10-08 Frank Li Superseded
[v7,2/3] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_DESIRED I3C: master: fix the address assign issue if assign-address is exist in dts - 1 - --- 2024-10-08 Frank Li Superseded
[v7,1/3] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS I3C: master: fix the address assign issue if assign-address is exist in dts - 1 - --- 2024-10-08 Frank Li Superseded
[v3,4/4] arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS support arm64: dts: imx8mm-kontron: Add HDMI and LVDS display support - - - --- 2024-10-08 Frieder Schrempf New
[v3,3/4] arm64: dts: imx8mm-kontron: Add support for display bridges on BL i.MX8MM arm64: dts: imx8mm-kontron: Add HDMI and LVDS display support - - - --- 2024-10-08 Frieder Schrempf New
tty: serial: fsl_lpuart: add 7-bits format support on imx7ulp/imx8ulp/imx8qxp tty: serial: fsl_lpuart: add 7-bits format support on imx7ulp/imx8ulp/imx8qxp - - - --- 2024-10-08 Luke Wang New
[v1] net: ethernet: fix NULL pointer dereference at fec_ptp_save_state() [v1] net: ethernet: fix NULL pointer dereference at fec_ptp_save_state() - - - --- 2024-10-08 Dillon Min New
[v2,net-next,2/2] net: phy: c45-tja11xx: add support for outputing RMII reference clock make PHY output RMII reference clock - - - --- 2024-10-08 Wei Fang Superseded
[v2,net-next,1/2] dt-bindings: net: tja11xx: add "nxp,rmii-refclk-out" property make PHY output RMII reference clock - - - --- 2024-10-08 Wei Fang Superseded
[v6,3/3] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node [v6,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 - - - --- 2024-10-08 Xu Yang Superseded
[v6,2/3] arm64: dts: imx95: add usb3 related nodes [v6,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 - - - --- 2024-10-08 Xu Yang Superseded
[v6,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 [v6,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 - 1 - --- 2024-10-08 Xu Yang Superseded
[net] net: fec: don't save PTP state if PTP is unsupported [net] net: fec: don't save PTP state if PTP is unsupported - 2 1 --- 2024-10-08 Wei Fang In Next
[v2,2/2] spi: spi-imx: Fix casting warnings [v2,1/2] spi: spi-fsl-dspi: Fix casting warnings - 1 - --- 2024-10-08 Hardevsinh Palaniya In Next
[v2,1/2] spi: spi-fsl-dspi: Fix casting warnings [v2,1/2] spi: spi-fsl-dspi: Fix casting warnings - - - --- 2024-10-08 Hardevsinh Palaniya In Next
[v1,1/1] arm64: dts: layerscape: remove cooling-max-state and cooling-min-state [v1,1/1] arm64: dts: layerscape: remove cooling-max-state and cooling-min-state - - - --- 2024-10-07 Frank Li In Next
[v2,1/1] dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property [v2,1/1] dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property 1 1 - --- 2024-10-07 Frank Li In Next
[v3,2/2] mtd: nand: raw: gpmi: improve power management handling [v3,1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS - - - --- 2024-10-07 Han Xu In Next
[v3,1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS [v3,1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS - - - --- 2024-10-07 Han Xu In Next
[v3,1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number [v3,1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number - - - --- 2024-10-07 Frank Li frank_li In Next
[v3,1/1] dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent [v3,1/1] dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent - 1 - --- 2024-10-07 Frank Li In Next
[v1,4/4] dmaengine: Unify checks in dma_request_chan() dmaengine: dma_request_chan*() amendments - - - --- 2024-10-07 Andy Shevchenko Superseded
[v1,3/4] dmaengine: Add a comment on why it's okay when kasprintf() fails dmaengine: dma_request_chan*() amendments - - - --- 2024-10-07 Andy Shevchenko Superseded
[v1,2/4] dmaengine: Use dma_request_channel() instead of __dma_request_channel() dmaengine: dma_request_chan*() amendments - - - --- 2024-10-07 Andy Shevchenko Superseded
[v1,1/4] dmaengine: Replace dma_request_slave_channel() by dma_request_chan() dmaengine: dma_request_chan*() amendments - - - --- 2024-10-07 Andy Shevchenko Superseded
ARM: dts: imx6qdl-dhcom: Fix model typo for i.MX6 DHSOM ARM: dts: imx6qdl-dhcom: Fix model typo for i.MX6 DHSOM - 1 - --- 2024-10-07 Marek Vasut In Next
arm64: dts: imx8mp: add cpuidle state "cpu-pd-wait" arm64: dts: imx8mp: add cpuidle state "cpu-pd-wait" - - - --- 2024-10-07 POPESCU Catalin In Next
[next] clk: imx: pll14xx: Fix potential integer overflow on multiplication [next] clk: imx: pll14xx: Fix potential integer overflow on multiplication - - - --- 2024-10-07 Colin Ian King New
pinctrl: imx27: Fix redefinition of 'PC' in imx27 driver pinctrl: imx27: Fix redefinition of 'PC' in imx27 driver - - - --- 2024-10-07 Paulo Miguel Almeida New
[v7,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle [v7,1/1] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle - 1 - --- 2024-10-04 Frank Li Superseded
[net-next,v4,3/3] net: fec: make PPS channel configurable net: fec: add PPS channel configuration - 2 1 --- 2024-10-04 Francesco Dolcini In Next
[net-next,v4,2/3] net: fec: refactor PPS channel configuration net: fec: add PPS channel configuration - 2 - --- 2024-10-04 Francesco Dolcini In Next
[net-next,v4,1/3] dt-bindings: net: fec: add pps channel property net: fec: add PPS channel configuration 1 - - --- 2024-10-04 Francesco Dolcini In Next
[23/51] irqchip/imx-irqsteer: Switch to __pm_runtime_put_autosuspend() treewide: Switch to __pm_runtime_put_autosuspend() - - - --- 2024-10-04 Sakari Ailus New
[v2,1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number [v2,1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number - - - --- 2024-10-03 Frank Li Superseded
[v6,3/3] i3c: master: Fix dynamic address leak when 'assigned-address' is present I3C: master: fix the address assign issue if assign-address is exist in dts - - - --- 2024-10-03 Frank Li Superseded
[v6,2/3] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_DESIRED I3C: master: fix the address assign issue if assign-address is exist in dts - - - --- 2024-10-03 Frank Li Superseded
[v6,1/3] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS I3C: master: fix the address assign issue if assign-address is exist in dts - 1 - --- 2024-10-03 Frank Li Superseded
[v2] EDAC: MAINTAINERS: change FSL DDR EDAC maintainer to Frank Li [v2] EDAC: MAINTAINERS: change FSL DDR EDAC maintainer to Frank Li - 1 - --- 2024-10-03 Krzysztof Kozlowski New
[v2,4/4] arm64: dts: imx8qm-mek: Add PCIe and sata [v2,1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-03 Frank Li Superseded
[v2,3/4] arm64: dts: imx8qxp-mek: Add PCIe support [v2,1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-03 Frank Li Superseded
[v2,2/4] arm64: dts: imx8dxl-evk: Add PCIe support [v2,1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-03 Frank Li Superseded
[v2,1/4] arm64: dts: imx8-ss-hsio: Add PCIe support [v2,1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-03 Frank Li Superseded
pinctrl: imx27: Fix too generic defines pinctrl: imx27: Fix too generic defines - 1 - --- 2024-10-03 Linus Walleij New
gpu: ipu-v3: vdic: Drop unused prepare_vdi_in_buffers() gpu: ipu-v3: vdic: Drop unused prepare_vdi_in_buffers() - 1 - --- 2024-10-03 Marek Vasut New
[1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number [1/1] dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number - - - --- 2024-10-02 Frank Li Superseded
[4/4] arm64: dts: imx8qm-mek: Add PCIe and sata [1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-02 Frank Li Superseded
[3/4] arm64: dts: imx8qxp-mek: Add PCIe support [1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-02 Frank Li Superseded
[2/4] arm64: dts: imx8dxl-evk: Add PCIe support [1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-02 Frank Li Superseded
[1/4] arm64: dts: imx8-ss-hsio: Add PCIe support [1/4] arm64: dts: imx8-ss-hsio: Add PCIe support - - - --- 2024-10-02 Frank Li Superseded
[v2] serial: imx: Update mctrl old_status on RTSD interrupt [v2] serial: imx: Update mctrl old_status on RTSD interrupt - 1 - --- 2024-10-02 Marek Vasut New
[v2,2/2] mtd: nand: raw: gpmi: improve power management handling [v2,1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS - - - --- 2024-10-02 Han Xu Superseded
[v2,1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS [v2,1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS - - - --- 2024-10-02 Han Xu Superseded
[v6,6/6] i3c: master: svc: fix possible assignment of the same address to two devices I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-02 Frank Li In Next
[v6,5/6] i3c: master: svc: wait for Manual ACK/NACK Done before next step I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-02 Frank Li In Next
[v6,4/6] i3c: master: svc: use spin_lock_irqsave at svc_i3c_master_ibi_work() I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-02 Frank Li In Next
[v6,3/6] i3c: master: svc: need check IBIWON for dynamic address assignment I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-02 Frank Li In Next
[v6,2/6] i3c: master: svc: manually emit NACK/ACK for hotjoin I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-02 Frank Li In Next
[v6,1/6] i3c: master: svc: use repeat start when IBI WIN happens I3C: master: svc: collect all patches to improve hotjoin stability 1 - - --- 2024-10-02 Frank Li In Next
pinctrl: imx1: Fix too generic defines pinctrl: imx1: Fix too generic defines - 2 - --- 2024-10-02 Linus Walleij In Next
[v2,3/3] arm64: dts: S32G3: add S32G3 compatible for the pinctrl node pinctrl: s32: add missing pins and an S32G3 compatible - 1 - --- 2024-10-02 Andrei Stefanescu New
[v2,2/3] dt-bindings: pinctrl: add S32G3 compatible for the SIUL2 driver pinctrl: s32: add missing pins and an S32G3 compatible - - - --- 2024-10-02 Andrei Stefanescu New
[v2,1/3] pinctrl: s32: add missing pins definitions pinctrl: s32: add missing pins and an S32G3 compatible - 1 - --- 2024-10-02 Andrei Stefanescu New
[v4,4/4] i2c: imx: prevent rescheduling in non dma mode i2c: imx: prevent rescheduling in non-dma mode 1 - - --- 2024-10-02 Stefan Eichenberger Superseded
[v4,3/4] i2c: imx: use readb_relaxed and writeb_relaxed i2c: imx: prevent rescheduling in non-dma mode 1 - - --- 2024-10-02 Stefan Eichenberger Superseded
[v4,2/4] i2c: imx: separate atomic, dma and non-dma use case i2c: imx: prevent rescheduling in non-dma mode 1 1 - --- 2024-10-02 Stefan Eichenberger Superseded
[v4,1/4] i2c: imx: only poll for bus busy in multi master mode i2c: imx: prevent rescheduling in non-dma mode 1 1 - --- 2024-10-02 Stefan Eichenberger Superseded
serial: imx: Update mctrl old_status on RTSD interrupt serial: imx: Update mctrl old_status on RTSD interrupt - 1 - --- 2024-10-02 Marek Vasut Superseded
[1/1] arm64: dts: imx8mp-evk: add PCIe Endpoint function overlay file [1/1] arm64: dts: imx8mp-evk: add PCIe Endpoint function overlay file - - - --- 2024-10-01 Frank Li In Next
[3/3] i3c: master: Fix dynamic address leak when 'assigned-address' is present I3C: master: fix the address assign issue if assign-address is exist in dts - - - --- 2024-10-01 Frank Li Superseded
[2/3] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT I3C: master: fix the address assign issue if assign-address is exist in dts - - - --- 2024-10-01 Frank Li Superseded
[1/3] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_STATUS_BITS I3C: master: fix the address assign issue if assign-address is exist in dts - 1 - --- 2024-10-01 Frank Li Superseded
[2/2] mtd: nand: raw: gpmi: improve power management handling [1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS - - - --- 2024-10-01 Han Xu Superseded
[1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS [1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS - - - --- 2024-10-01 Han Xu Superseded
[v5,1/1] i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs() [v5,1/1] i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs() - 1 - --- 2024-10-01 Frank Li In Next
[v5,1/1] i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin [v5,1/1] i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin - 1 - --- 2024-10-01 Frank Li In Next
[v5,6/6] i3c: master: svc: fix possible assignment of the same address to two devices I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-01 Frank Li Superseded
[v5,5/6] i3c: master: svc: wait for Manual ACK/NACK Done before next step I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-01 Frank Li Superseded
[v5,4/6] i3c: master: svc: use spin_lock_irqsave at svc_i3c_master_ibi_work() I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-01 Frank Li Superseded
[v5,3/6] i3c: master: svc: need check IBIWON for dynamtica address assign I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-01 Frank Li Superseded
[v5,2/6] i3c: master: svc: manually emit NACK/ACK for hotjoin I3C: master: svc: collect all patches to improve hotjoin stability - 1 - --- 2024-10-01 Frank Li Superseded
[v5,1/6] i3c: master: svc: use repeat start when IBI WIN happens I3C: master: svc: collect all patches to improve hotjoin stability 1 - - --- 2024-10-01 Frank Li Superseded
[v1,2/2] arm64: dts: imx8mm-verdin: Update tla2024 adc compatible arm64: freescale: verdin: Update tla2024 adc compatible - - - --- 2024-10-01 João Paulo Gonçalves New
[v1,1/2] arm64: dts: imx8mp-verdin: Update tla2024 adc compatible arm64: freescale: verdin: Update tla2024 adc compatible - - - --- 2024-10-01 João Paulo Gonçalves New
« 1 2 ... 14 15 16 … 48 49 »