diff mbox series

[v3,1/3] arm64: dts: imx93-9x9-qsb: Enable sound-wm8962 sound card

Message ID 1729068557-10073-2-git-send-email-shengjiu.wang@nxp.com (mailing list archive)
State In Next, archived
Headers show
Series arm64: dts: imx93-9x9-qsb: Add sound card support | expand

Commit Message

Shengjiu Wang Oct. 16, 2024, 8:49 a.m. UTC 
Add wm8962 sound card which connects to sai3. The connection
of SAI3 and wm8962 is controlled by PCAL6524HEAZ module, add
gpio-hog for it.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
 .../boot/dts/freescale/imx93-9x9-qsb.dts      | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
index f8a73612fa05..5cb85a83d2ef 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -68,6 +68,15 @@  reg_vref_1v8: regulator-adc-vref {
 		regulator-max-microvolt = <1800000>;
 	};
 
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6524 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_rpi_3v3: regulator-rpi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_RPI_3V3";
@@ -88,6 +97,22 @@  reg_usdhc2_vmmc: regulator-usdhc2 {
 		enable-active-high;
 		off-on-delay-us = <12000>;
 	};
+
+	sound-wm8962 {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		hp-det-gpio = <&pcal6524 4 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"IN1R", "AMIC";
+	};
 };
 
 &adc1 {
@@ -136,6 +161,28 @@  &lpi2c1 {
 	pinctrl-0 = <&pinctrl_lpi2c1>;
 	status = "okay";
 
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
 	ptn5110: tcpc@50 {
 		compatible = "nxp,ptn5110", "tcpci";
 		reg = <0x50>;
@@ -194,6 +241,12 @@  pcal6524: gpio@22 {
 		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pcal6524>;
+
+		exp-sel-hog {
+			gpio-hog;
+			gpios = <22 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
 	};
 
 	pmic@25 {
@@ -286,6 +339,17 @@  &mu2 {
 	status = "okay";
 };
 
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX93_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
 &usbotg1 {
 	dr_mode = "otg";
 	hnp-disable;
@@ -443,6 +507,16 @@  MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
 		>;
 	};
 
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO12__SAI3_RX_SYNC		0x31e
+			MX93_PAD_GPIO_IO18__SAI3_RX_BCLK		0x31e
+			MX93_PAD_GPIO_IO17__SAI3_MCLK			0x31e
+			MX93_PAD_GPIO_IO19__SAI3_TX_DATA00		0x31e
+			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00		0x31e
+		>;
+	};
+
 	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 		fsl,pins = <
 			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e