Message ID | 20240311-drm-imx-cleanup-v1-11-e104f05caa51@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | drm/imx/ipuv3: switch LDB and parallel-display driver to use drm_bridge_connector | expand |
On Mon, 11 Mar 2024 at 13:20, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > Use the imx_legacy bridge driver instead of handlign display modes via > the connector node. > > All existing usecases already support attaching using > the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, while the imx_legacy bridge > doesn't support creating connector at all. Switch to > drm_bridge_connector at the same time. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/gpu/drm/imx/ipuv3/parallel-display.c | 95 +++++----------------------- > 1 file changed, 17 insertions(+), 78 deletions(-) > > diff --git a/drivers/gpu/drm/imx/ipuv3/parallel-display.c b/drivers/gpu/drm/imx/ipuv3/parallel-display.c > index 9b60bfbd16e6..73a15259c93c 100644 > --- a/drivers/gpu/drm/imx/ipuv3/parallel-display.c > +++ b/drivers/gpu/drm/imx/ipuv3/parallel-display.c > @@ -12,10 +12,9 @@ > #include <linux/platform_device.h> > #include <linux/videodev2.h> > > -#include <video/of_display_timing.h> > - > #include <drm/drm_atomic_helper.h> > #include <drm/drm_bridge.h> > +#include <drm/drm_bridge_connector.h> > #include <drm/drm_managed.h> > #include <drm/drm_of.h> > #include <drm/drm_panel.h> > @@ -25,7 +24,6 @@ > #include "imx-drm.h" > > struct imx_parallel_display_encoder { > - struct drm_connector connector; > struct drm_encoder encoder; > struct drm_bridge bridge; > struct imx_parallel_display *pd; > @@ -34,51 +32,14 @@ struct imx_parallel_display_encoder { > struct imx_parallel_display { > struct device *dev; > u32 bus_format; > - u32 bus_flags; > - struct drm_display_mode mode; > struct drm_bridge *next_bridge; > }; > > -static inline struct imx_parallel_display *con_to_imxpd(struct drm_connector *c) > -{ > - return container_of(c, struct imx_parallel_display_encoder, connector)->pd; > -} > - > static inline struct imx_parallel_display *bridge_to_imxpd(struct drm_bridge *b) > { > return container_of(b, struct imx_parallel_display_encoder, bridge)->pd; > } > > -static int imx_pd_connector_get_modes(struct drm_connector *connector) > -{ > - struct imx_parallel_display *imxpd = con_to_imxpd(connector); > - struct device_node *np = imxpd->dev->of_node; > - int num_modes; > - > - if (np) { > - struct drm_display_mode *mode = drm_mode_create(connector->dev); > - int ret; > - > - if (!mode) > - return -EINVAL; > - > - ret = of_get_drm_display_mode(np, &imxpd->mode, > - &imxpd->bus_flags, > - OF_USE_NATIVE_MODE); > - if (ret) { > - drm_mode_destroy(connector->dev, mode); > - return ret; > - } > - > - drm_mode_copy(mode, &imxpd->mode); > - mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; > - drm_mode_probed_add(connector, mode); > - num_modes++; > - } > - > - return num_modes; > -} > - > static const u32 imx_pd_bus_fmts[] = { > MEDIA_BUS_FMT_RGB888_1X24, > MEDIA_BUS_FMT_BGR888_1X24, > @@ -172,7 +133,6 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge, > { > struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state); > struct drm_display_info *di = &conn_state->connector->display_info; > - struct imx_parallel_display *imxpd = bridge_to_imxpd(bridge); > struct drm_bridge_state *next_bridge_state = NULL; > struct drm_bridge *next_bridge; > u32 bus_flags, bus_fmt; > @@ -184,10 +144,8 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge, > > if (next_bridge_state) > bus_flags = next_bridge_state->input_bus_cfg.flags; > - else if (di->num_bus_formats) > - bus_flags = di->bus_flags; > else > - bus_flags = imxpd->bus_flags; > + bus_flags = di->bus_flags; > > bus_fmt = bridge_state->input_bus_cfg.format; > if (!imx_pd_format_supported(bus_fmt)) > @@ -203,19 +161,16 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge, > return 0; > } > > -static const struct drm_connector_funcs imx_pd_connector_funcs = { > - .fill_modes = drm_helper_probe_single_connector_modes, > - .destroy = imx_drm_connector_destroy, > - .reset = drm_atomic_helper_connector_reset, > - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > -}; > +static int imx_pd_bridge_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) > +{ > + struct imx_parallel_display *imxpd = bridge_to_imxpd(bridge); > > -static const struct drm_connector_helper_funcs imx_pd_connector_helper_funcs = { > - .get_modes = imx_pd_connector_get_modes, > -}; > + return drm_bridge_attach(bridge->encoder, imxpd->next_bridge, bridge, flags); > +} > > static const struct drm_bridge_funcs imx_pd_bridge_funcs = { > + .attach = imx_pd_bridge_attach, > .atomic_reset = drm_atomic_helper_bridge_reset, > .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > @@ -240,7 +195,6 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) > return PTR_ERR(imxpd_encoder); > > imxpd_encoder->pd = imxpd; > - connector = &imxpd_encoder->connector; > encoder = &imxpd_encoder->encoder; > bridge = &imxpd_encoder->bridge; > > @@ -248,28 +202,14 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) > if (ret) > return ret; > > - /* set the connector's dpms to OFF so that > - * drm_helper_connector_dpms() won't return > - * immediately since the current state is ON > - * at this point. > - */ > - connector->dpms = DRM_MODE_DPMS_OFF; > - > bridge->funcs = &imx_pd_bridge_funcs; > drm_bridge_attach(encoder, bridge, NULL, 0); This should have become DRM_BRIDGE_ATTACH_NO_CONNECTOR. I'll fix it for v2, if the overall series is thought to be acceptable. > > - if (imxpd->next_bridge) { > - ret = drm_bridge_attach(encoder, imxpd->next_bridge, bridge, 0); > - if (ret < 0) > - return ret; > - } else { > - drm_connector_helper_add(connector, > - &imx_pd_connector_helper_funcs); > - drm_connector_init(drm, connector, &imx_pd_connector_funcs, > - DRM_MODE_CONNECTOR_DPI); > - > - drm_connector_attach_encoder(connector, encoder); > - } > + connector = drm_bridge_connector_init(drm, encoder); > + if (IS_ERR(connector)) > + return PTR_ERR(connector); > + > + drm_connector_attach_encoder(connector, encoder); > > return 0; > } > @@ -293,12 +233,11 @@ static int imx_pd_probe(struct platform_device *pdev) > > /* port@1 is the output port */ > imxpd->next_bridge = devm_drm_of_get_bridge(dev, np, 1, 0); > + if (imxpd->next_bridge == ERR_PTR(-ENODEV)) > + imxpd->next_bridge = devm_imx_drm_legacy_bridge(dev, np, DRM_MODE_CONNECTOR_DPI); > if (IS_ERR(imxpd->next_bridge)) { > ret = PTR_ERR(imxpd->next_bridge); > - if (ret != -ENODEV) > - return ret; > - > - imxpd->next_bridge = NULL; > + return ret; > } > > ret = of_property_read_string(np, "interface-pix-fmt", &fmt); > > -- > 2.39.2 >
diff --git a/drivers/gpu/drm/imx/ipuv3/parallel-display.c b/drivers/gpu/drm/imx/ipuv3/parallel-display.c index 9b60bfbd16e6..73a15259c93c 100644 --- a/drivers/gpu/drm/imx/ipuv3/parallel-display.c +++ b/drivers/gpu/drm/imx/ipuv3/parallel-display.c @@ -12,10 +12,9 @@ #include <linux/platform_device.h> #include <linux/videodev2.h> -#include <video/of_display_timing.h> - #include <drm/drm_atomic_helper.h> #include <drm/drm_bridge.h> +#include <drm/drm_bridge_connector.h> #include <drm/drm_managed.h> #include <drm/drm_of.h> #include <drm/drm_panel.h> @@ -25,7 +24,6 @@ #include "imx-drm.h" struct imx_parallel_display_encoder { - struct drm_connector connector; struct drm_encoder encoder; struct drm_bridge bridge; struct imx_parallel_display *pd; @@ -34,51 +32,14 @@ struct imx_parallel_display_encoder { struct imx_parallel_display { struct device *dev; u32 bus_format; - u32 bus_flags; - struct drm_display_mode mode; struct drm_bridge *next_bridge; }; -static inline struct imx_parallel_display *con_to_imxpd(struct drm_connector *c) -{ - return container_of(c, struct imx_parallel_display_encoder, connector)->pd; -} - static inline struct imx_parallel_display *bridge_to_imxpd(struct drm_bridge *b) { return container_of(b, struct imx_parallel_display_encoder, bridge)->pd; } -static int imx_pd_connector_get_modes(struct drm_connector *connector) -{ - struct imx_parallel_display *imxpd = con_to_imxpd(connector); - struct device_node *np = imxpd->dev->of_node; - int num_modes; - - if (np) { - struct drm_display_mode *mode = drm_mode_create(connector->dev); - int ret; - - if (!mode) - return -EINVAL; - - ret = of_get_drm_display_mode(np, &imxpd->mode, - &imxpd->bus_flags, - OF_USE_NATIVE_MODE); - if (ret) { - drm_mode_destroy(connector->dev, mode); - return ret; - } - - drm_mode_copy(mode, &imxpd->mode); - mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; - drm_mode_probed_add(connector, mode); - num_modes++; - } - - return num_modes; -} - static const u32 imx_pd_bus_fmts[] = { MEDIA_BUS_FMT_RGB888_1X24, MEDIA_BUS_FMT_BGR888_1X24, @@ -172,7 +133,6 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge, { struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state); struct drm_display_info *di = &conn_state->connector->display_info; - struct imx_parallel_display *imxpd = bridge_to_imxpd(bridge); struct drm_bridge_state *next_bridge_state = NULL; struct drm_bridge *next_bridge; u32 bus_flags, bus_fmt; @@ -184,10 +144,8 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge, if (next_bridge_state) bus_flags = next_bridge_state->input_bus_cfg.flags; - else if (di->num_bus_formats) - bus_flags = di->bus_flags; else - bus_flags = imxpd->bus_flags; + bus_flags = di->bus_flags; bus_fmt = bridge_state->input_bus_cfg.format; if (!imx_pd_format_supported(bus_fmt)) @@ -203,19 +161,16 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge, return 0; } -static const struct drm_connector_funcs imx_pd_connector_funcs = { - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = imx_drm_connector_destroy, - .reset = drm_atomic_helper_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; +static int imx_pd_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct imx_parallel_display *imxpd = bridge_to_imxpd(bridge); -static const struct drm_connector_helper_funcs imx_pd_connector_helper_funcs = { - .get_modes = imx_pd_connector_get_modes, -}; + return drm_bridge_attach(bridge->encoder, imxpd->next_bridge, bridge, flags); +} static const struct drm_bridge_funcs imx_pd_bridge_funcs = { + .attach = imx_pd_bridge_attach, .atomic_reset = drm_atomic_helper_bridge_reset, .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, @@ -240,7 +195,6 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) return PTR_ERR(imxpd_encoder); imxpd_encoder->pd = imxpd; - connector = &imxpd_encoder->connector; encoder = &imxpd_encoder->encoder; bridge = &imxpd_encoder->bridge; @@ -248,28 +202,14 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data) if (ret) return ret; - /* set the connector's dpms to OFF so that - * drm_helper_connector_dpms() won't return - * immediately since the current state is ON - * at this point. - */ - connector->dpms = DRM_MODE_DPMS_OFF; - bridge->funcs = &imx_pd_bridge_funcs; drm_bridge_attach(encoder, bridge, NULL, 0); - if (imxpd->next_bridge) { - ret = drm_bridge_attach(encoder, imxpd->next_bridge, bridge, 0); - if (ret < 0) - return ret; - } else { - drm_connector_helper_add(connector, - &imx_pd_connector_helper_funcs); - drm_connector_init(drm, connector, &imx_pd_connector_funcs, - DRM_MODE_CONNECTOR_DPI); - - drm_connector_attach_encoder(connector, encoder); - } + connector = drm_bridge_connector_init(drm, encoder); + if (IS_ERR(connector)) + return PTR_ERR(connector); + + drm_connector_attach_encoder(connector, encoder); return 0; } @@ -293,12 +233,11 @@ static int imx_pd_probe(struct platform_device *pdev) /* port@1 is the output port */ imxpd->next_bridge = devm_drm_of_get_bridge(dev, np, 1, 0); + if (imxpd->next_bridge == ERR_PTR(-ENODEV)) + imxpd->next_bridge = devm_imx_drm_legacy_bridge(dev, np, DRM_MODE_CONNECTOR_DPI); if (IS_ERR(imxpd->next_bridge)) { ret = PTR_ERR(imxpd->next_bridge); - if (ret != -ENODEV) - return ret; - - imxpd->next_bridge = NULL; + return ret; } ret = of_property_read_string(np, "interface-pix-fmt", &fmt);
Use the imx_legacy bridge driver instead of handlign display modes via the connector node. All existing usecases already support attaching using the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, while the imx_legacy bridge doesn't support creating connector at all. Switch to drm_bridge_connector at the same time. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/imx/ipuv3/parallel-display.c | 95 +++++----------------------- 1 file changed, 17 insertions(+), 78 deletions(-)