diff mbox series

[v3,11/11] PCI: imx6: Add i.MX8Q PCIe support

Message ID 20240402-pci2_upstream-v3-11-803414bdb430@nxp.com (mailing list archive)
State Superseded
Headers show
Series PCI: imx6: Fix\rename\clean up and add lut information for imx95 | expand

Commit Message

Frank Li April 2, 2024, 2:33 p.m. UTC 
From: Richard Zhu <hongxing.zhu@nxp.com>

Add i.MX8Q (i.MX8QM, i.MX8QXP and i.MX8DXL) PCIe support.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/pci/controller/dwc/pcie-imx.c | 54 +++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

Comments

Manivannan Sadhasivam April 27, 2024, 11:47 a.m. UTC | #1 
On Tue, Apr 02, 2024 at 10:33:47AM -0400, Frank Li wrote:
> From: Richard Zhu <hongxing.zhu@nxp.com>
> 
> Add i.MX8Q (i.MX8QM, i.MX8QXP and i.MX8DXL) PCIe support.
> 

Add some info like IP version, PCIe Gen, how different the code support
comparted to previous SoCs etc...

> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  drivers/pci/controller/dwc/pcie-imx.c | 54 +++++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-imx.c b/drivers/pci/controller/dwc/pcie-imx.c
> index 378808262d16b..af7c79e869e70 100644
> --- a/drivers/pci/controller/dwc/pcie-imx.c
> +++ b/drivers/pci/controller/dwc/pcie-imx.c
> @@ -30,6 +30,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/reset.h>
>  #include <linux/phy/phy.h>
> +#include <linux/phy/pcie.h>
>  #include <linux/pm_domain.h>
>  #include <linux/pm_runtime.h>
>  
> @@ -81,6 +82,7 @@ enum imx_pcie_variants {
>  	IMX8MQ,
>  	IMX8MM,
>  	IMX8MP,
> +	IMX8Q,
>  	IMX95,
>  	IMX8MQ_EP,
>  	IMX8MM_EP,
> @@ -96,6 +98,7 @@ enum imx_pcie_variants {
>  #define IMX_PCIE_FLAG_HAS_PHY_RESET		BIT(5)
>  #define IMX_PCIE_FLAG_HAS_SERDES		BIT(6)
>  #define IMX_PCIE_FLAG_SUPPORT_64BIT		BIT(7)
> +#define IMX_PCIE_FLAG_CPU_ADDR_FIXUP		BIT(8)
>  
>  #define imx_check_flag(pci, val)     (pci->drvdata->flags & val)
>  
> @@ -132,6 +135,7 @@ struct imx_pcie {
>  	struct regmap		*iomuxc_gpr;
>  	u16			msi_ctrl;
>  	u32			controller_id;
> +	u32			local_addr;
>  	struct reset_control	*pciephy_reset;
>  	struct reset_control	*apps_reset;
>  	struct reset_control	*turnoff_reset;
> @@ -402,6 +406,10 @@ static void imx_pcie_configure_type(struct imx_pcie *imx_pcie)
>  	if (!drvdata->mode_mask[id])
>  		id = 0;
>  
> +	/* If mode_mask is 0, means use phy driver to set mode */
> +	if (!drvdata->mode_mask[id])
> +		return;

There is already a check above for 0 mode_mask. Please consolidate.

> +
>  	mask = drvdata->mode_mask[id];
>  	val = mode << (ffs(mask) - 1);
>  
> @@ -957,6 +965,7 @@ static void imx_pcie_ltssm_enable(struct device *dev)
>  	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
>  	const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
>  
> +	phy_set_speed(imx_pcie->phy, PCI_EXP_LNKCAP_SLS_2_5GB);
>  	if (drvdata->ltssm_mask)
>  		regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off, drvdata->ltssm_mask,
>  				   drvdata->ltssm_mask);
> @@ -969,6 +978,7 @@ static void imx_pcie_ltssm_disable(struct device *dev)
>  	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
>  	const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
>  
> +	phy_set_speed(imx_pcie->phy, 0);
>  	if (drvdata->ltssm_mask)
>  		regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off,
>  				   drvdata->ltssm_mask, 0);
> @@ -1104,6 +1114,12 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
>  			goto err_clk_disable;
>  		}
>  
> +		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
> +		if (ret) {
> +			dev_err(dev, "unable to set pcie PHY mode\n");
> +			goto err_phy_off;
> +		}

This is not i.MX8Q specific. Please add it in a separate patch.

> +
>  		ret = phy_power_on(imx_pcie->phy);
>  		if (ret) {
>  			dev_err(dev, "waiting for PHY ready timeout!\n");
> @@ -1154,6 +1170,28 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
>  		regulator_disable(imx_pcie->vpcie);
>  }
>  
> +static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
> +{
> +	struct imx_pcie *imx_pcie = to_imx_pcie(pcie);
> +	struct dw_pcie_ep *ep = &pcie->ep;
> +	struct dw_pcie_rp *pp = &pcie->pp;
> +	struct resource_entry *entry;
> +	unsigned int offset;
> +
> +	if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_CPU_ADDR_FIXUP))

This flag should be documented in the commit message.

> +		return cpu_addr;
> +
> +	if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
> +		offset = ep->phys_base;
> +	} else {
> +		entry = resource_list_first_type(&pp->bridge->windows,
> +						 IORESOURCE_MEM);

Check for NULL entry.

> +		offset = entry->res->start;
> +	}
> +
> +	return (cpu_addr + imx_pcie->local_addr - offset);
> +}
> +
>  static const struct dw_pcie_host_ops imx_pcie_host_ops = {
>  	.init = imx_pcie_host_init,
>  	.deinit = imx_pcie_host_exit,
> @@ -1162,6 +1200,7 @@ static const struct dw_pcie_host_ops imx_pcie_host_ops = {
>  static const struct dw_pcie_ops dw_pcie_ops = {
>  	.start_link = imx_pcie_start_link,
>  	.stop_link = imx_pcie_stop_link,
> +	.cpu_addr_fixup = imx_pcie_cpu_addr_fixup,
>  };
>  
>  static void imx_pcie_ep_init(struct dw_pcie_ep *ep)
> @@ -1481,6 +1520,12 @@ static int imx_pcie_probe(struct platform_device *pdev)
>  					     "Failed to get PCIEPHY reset control\n");
>  	}
>  
> +	if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_CPU_ADDR_FIXUP)) {
> +		ret = of_property_read_u32(node, "fsl,local-address", &imx_pcie->local_addr);
> +		if (ret)
> +			return dev_err_probe(dev, ret, "Failed to get local-address");

Is it OK to continue?

- Mani
Frank Li April 29, 2024, 5:56 p.m. UTC | #2 
On Sat, Apr 27, 2024 at 05:17:36PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Apr 02, 2024 at 10:33:47AM -0400, Frank Li wrote:
> > From: Richard Zhu <hongxing.zhu@nxp.com>
> > 
> > Add i.MX8Q (i.MX8QM, i.MX8QXP and i.MX8DXL) PCIe support.
> > 
> 
> Add some info like IP version, PCIe Gen, how different the code support
> comparted to previous SoCs etc...
> 
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> >  drivers/pci/controller/dwc/pcie-imx.c | 54 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 54 insertions(+)
> > 
> > diff --git a/drivers/pci/controller/dwc/pcie-imx.c b/drivers/pci/controller/dwc/pcie-imx.c
> > index 378808262d16b..af7c79e869e70 100644
> > --- a/drivers/pci/controller/dwc/pcie-imx.c
> > +++ b/drivers/pci/controller/dwc/pcie-imx.c
> > @@ -30,6 +30,7 @@
> >  #include <linux/interrupt.h>
> >  #include <linux/reset.h>
> >  #include <linux/phy/phy.h>
> > +#include <linux/phy/pcie.h>
> >  #include <linux/pm_domain.h>
> >  #include <linux/pm_runtime.h>
> >  
> > @@ -81,6 +82,7 @@ enum imx_pcie_variants {
> >  	IMX8MQ,
> >  	IMX8MM,
> >  	IMX8MP,
> > +	IMX8Q,
> >  	IMX95,
> >  	IMX8MQ_EP,
> >  	IMX8MM_EP,
> > @@ -96,6 +98,7 @@ enum imx_pcie_variants {
> >  #define IMX_PCIE_FLAG_HAS_PHY_RESET		BIT(5)
> >  #define IMX_PCIE_FLAG_HAS_SERDES		BIT(6)
> >  #define IMX_PCIE_FLAG_SUPPORT_64BIT		BIT(7)
> > +#define IMX_PCIE_FLAG_CPU_ADDR_FIXUP		BIT(8)
> >  
> >  #define imx_check_flag(pci, val)     (pci->drvdata->flags & val)
> >  
> > @@ -132,6 +135,7 @@ struct imx_pcie {
> >  	struct regmap		*iomuxc_gpr;
> >  	u16			msi_ctrl;
> >  	u32			controller_id;
> > +	u32			local_addr;
> >  	struct reset_control	*pciephy_reset;
> >  	struct reset_control	*apps_reset;
> >  	struct reset_control	*turnoff_reset;
> > @@ -402,6 +406,10 @@ static void imx_pcie_configure_type(struct imx_pcie *imx_pcie)
> >  	if (!drvdata->mode_mask[id])
> >  		id = 0;
> >  
> > +	/* If mode_mask is 0, means use phy driver to set mode */
> > +	if (!drvdata->mode_mask[id])
> > +		return;
> 
> There is already a check above for 0 mode_mask. Please consolidate.
> 
> > +
> >  	mask = drvdata->mode_mask[id];
> >  	val = mode << (ffs(mask) - 1);
> >  
> > @@ -957,6 +965,7 @@ static void imx_pcie_ltssm_enable(struct device *dev)
> >  	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
> >  	const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
> >  
> > +	phy_set_speed(imx_pcie->phy, PCI_EXP_LNKCAP_SLS_2_5GB);
> >  	if (drvdata->ltssm_mask)
> >  		regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off, drvdata->ltssm_mask,
> >  				   drvdata->ltssm_mask);
> > @@ -969,6 +978,7 @@ static void imx_pcie_ltssm_disable(struct device *dev)
> >  	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
> >  	const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
> >  
> > +	phy_set_speed(imx_pcie->phy, 0);
> >  	if (drvdata->ltssm_mask)
> >  		regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off,
> >  				   drvdata->ltssm_mask, 0);
> > @@ -1104,6 +1114,12 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
> >  			goto err_clk_disable;
> >  		}
> >  
> > +		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
> > +		if (ret) {
> > +			dev_err(dev, "unable to set pcie PHY mode\n");
> > +			goto err_phy_off;
> > +		}
> 
> This is not i.MX8Q specific. Please add it in a separate patch.
> 
> > +
> >  		ret = phy_power_on(imx_pcie->phy);
> >  		if (ret) {
> >  			dev_err(dev, "waiting for PHY ready timeout!\n");
> > @@ -1154,6 +1170,28 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
> >  		regulator_disable(imx_pcie->vpcie);
> >  }
> >  
> > +static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
> > +{
> > +	struct imx_pcie *imx_pcie = to_imx_pcie(pcie);
> > +	struct dw_pcie_ep *ep = &pcie->ep;
> > +	struct dw_pcie_rp *pp = &pcie->pp;
> > +	struct resource_entry *entry;
> > +	unsigned int offset;
> > +
> > +	if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_CPU_ADDR_FIXUP))
> 
> This flag should be documented in the commit message.
> 
> > +		return cpu_addr;
> > +
> > +	if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
> > +		offset = ep->phys_base;
> > +	} else {
> > +		entry = resource_list_first_type(&pp->bridge->windows,
> > +						 IORESOURCE_MEM);
> 
> Check for NULL entry.
> 
> > +		offset = entry->res->start;
> > +	}
> > +
> > +	return (cpu_addr + imx_pcie->local_addr - offset);
> > +}
> > +
> >  static const struct dw_pcie_host_ops imx_pcie_host_ops = {
> >  	.init = imx_pcie_host_init,
> >  	.deinit = imx_pcie_host_exit,
> > @@ -1162,6 +1200,7 @@ static const struct dw_pcie_host_ops imx_pcie_host_ops = {
> >  static const struct dw_pcie_ops dw_pcie_ops = {
> >  	.start_link = imx_pcie_start_link,
> >  	.stop_link = imx_pcie_stop_link,
> > +	.cpu_addr_fixup = imx_pcie_cpu_addr_fixup,
> >  };
> >  
> >  static void imx_pcie_ep_init(struct dw_pcie_ep *ep)
> > @@ -1481,6 +1520,12 @@ static int imx_pcie_probe(struct platform_device *pdev)
> >  					     "Failed to get PCIEPHY reset control\n");
> >  	}
> >  
> > +	if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_CPU_ADDR_FIXUP)) {
> > +		ret = of_property_read_u32(node, "fsl,local-address", &imx_pcie->local_addr);
> > +		if (ret)
> > +			return dev_err_probe(dev, ret, "Failed to get local-address");
> 
> Is it OK to continue?

No, if no "fsl,local-address" for iMX8QM/QXP, address map will be wrong. 

Frank

> 
> - Mani
> 
> -- 
> மணிவண்ணன் சதாசிவம்
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-imx.c b/drivers/pci/controller/dwc/pcie-imx.c
index 378808262d16b..af7c79e869e70 100644
--- a/drivers/pci/controller/dwc/pcie-imx.c
+++ b/drivers/pci/controller/dwc/pcie-imx.c
@@ -30,6 +30,7 @@ 
 #include <linux/interrupt.h>
 #include <linux/reset.h>
 #include <linux/phy/phy.h>
+#include <linux/phy/pcie.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 
@@ -81,6 +82,7 @@  enum imx_pcie_variants {
 	IMX8MQ,
 	IMX8MM,
 	IMX8MP,
+	IMX8Q,
 	IMX95,
 	IMX8MQ_EP,
 	IMX8MM_EP,
@@ -96,6 +98,7 @@  enum imx_pcie_variants {
 #define IMX_PCIE_FLAG_HAS_PHY_RESET		BIT(5)
 #define IMX_PCIE_FLAG_HAS_SERDES		BIT(6)
 #define IMX_PCIE_FLAG_SUPPORT_64BIT		BIT(7)
+#define IMX_PCIE_FLAG_CPU_ADDR_FIXUP		BIT(8)
 
 #define imx_check_flag(pci, val)     (pci->drvdata->flags & val)
 
@@ -132,6 +135,7 @@  struct imx_pcie {
 	struct regmap		*iomuxc_gpr;
 	u16			msi_ctrl;
 	u32			controller_id;
+	u32			local_addr;
 	struct reset_control	*pciephy_reset;
 	struct reset_control	*apps_reset;
 	struct reset_control	*turnoff_reset;
@@ -402,6 +406,10 @@  static void imx_pcie_configure_type(struct imx_pcie *imx_pcie)
 	if (!drvdata->mode_mask[id])
 		id = 0;
 
+	/* If mode_mask is 0, means use phy driver to set mode */
+	if (!drvdata->mode_mask[id])
+		return;
+
 	mask = drvdata->mode_mask[id];
 	val = mode << (ffs(mask) - 1);
 
@@ -957,6 +965,7 @@  static void imx_pcie_ltssm_enable(struct device *dev)
 	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
 	const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
 
+	phy_set_speed(imx_pcie->phy, PCI_EXP_LNKCAP_SLS_2_5GB);
 	if (drvdata->ltssm_mask)
 		regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off, drvdata->ltssm_mask,
 				   drvdata->ltssm_mask);
@@ -969,6 +978,7 @@  static void imx_pcie_ltssm_disable(struct device *dev)
 	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
 	const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
 
+	phy_set_speed(imx_pcie->phy, 0);
 	if (drvdata->ltssm_mask)
 		regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off,
 				   drvdata->ltssm_mask, 0);
@@ -1104,6 +1114,12 @@  static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 			goto err_clk_disable;
 		}
 
+		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+		if (ret) {
+			dev_err(dev, "unable to set pcie PHY mode\n");
+			goto err_phy_off;
+		}
+
 		ret = phy_power_on(imx_pcie->phy);
 		if (ret) {
 			dev_err(dev, "waiting for PHY ready timeout!\n");
@@ -1154,6 +1170,28 @@  static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
 		regulator_disable(imx_pcie->vpcie);
 }
 
+static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
+{
+	struct imx_pcie *imx_pcie = to_imx_pcie(pcie);
+	struct dw_pcie_ep *ep = &pcie->ep;
+	struct dw_pcie_rp *pp = &pcie->pp;
+	struct resource_entry *entry;
+	unsigned int offset;
+
+	if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_CPU_ADDR_FIXUP))
+		return cpu_addr;
+
+	if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
+		offset = ep->phys_base;
+	} else {
+		entry = resource_list_first_type(&pp->bridge->windows,
+						 IORESOURCE_MEM);
+		offset = entry->res->start;
+	}
+
+	return (cpu_addr + imx_pcie->local_addr - offset);
+}
+
 static const struct dw_pcie_host_ops imx_pcie_host_ops = {
 	.init = imx_pcie_host_init,
 	.deinit = imx_pcie_host_exit,
@@ -1162,6 +1200,7 @@  static const struct dw_pcie_host_ops imx_pcie_host_ops = {
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.start_link = imx_pcie_start_link,
 	.stop_link = imx_pcie_stop_link,
+	.cpu_addr_fixup = imx_pcie_cpu_addr_fixup,
 };
 
 static void imx_pcie_ep_init(struct dw_pcie_ep *ep)
@@ -1481,6 +1520,12 @@  static int imx_pcie_probe(struct platform_device *pdev)
 					     "Failed to get PCIEPHY reset control\n");
 	}
 
+	if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_CPU_ADDR_FIXUP)) {
+		ret = of_property_read_u32(node, "fsl,local-address", &imx_pcie->local_addr);
+		if (ret)
+			return dev_err_probe(dev, ret, "Failed to get local-address");
+	}
+
 	switch (imx_pcie->drvdata->variant) {
 	case IMX8MQ:
 	case IMX8MQ_EP:
@@ -1605,6 +1650,7 @@  static const char * const imx6q_clks[] = {"pcie_bus", "pcie", "pcie_phy"};
 static const char * const imx8mm_clks[] = {"pcie_bus", "pcie", "pcie_aux"};
 static const char * const imx8mq_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"};
 static const char * const imx6sx_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_inbound_axi"};
+static const char * const imx8q_clks[] = {"mstr", "slv", "dbi"};
 
 static const struct imx_pcie_drvdata drvdata[] = {
 	[IMX6Q] = {
@@ -1708,6 +1754,13 @@  static const struct imx_pcie_drvdata drvdata[] = {
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
 		.set_ref_clk = imx8mm_pcie_set_ref_clk,
 	},
+	[IMX8Q] = {
+		.variant = IMX8Q,
+		.flags = IMX_PCIE_FLAG_HAS_PHYDRV |
+			 IMX_PCIE_FLAG_CPU_ADDR_FIXUP,
+		.clk_names = imx8q_clks,
+		.clks_cnt = ARRAY_SIZE(imx8q_clks),
+	},
 	[IMX95] = {
 		.variant = IMX95,
 		.flags = IMX_PCIE_FLAG_HAS_SERDES,
@@ -1785,6 +1838,7 @@  static const struct of_device_id imx_pcie_of_match[] = {
 	{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
 	{ .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
 	{ .compatible = "fsl,imx8mp-pcie", .data = &drvdata[IMX8MP], },
+	{ .compatible = "fsl,imx8q-pcie", .data = &drvdata[IMX8Q], },
 	{ .compatible = "fsl,imx95-pcie", .data = &drvdata[IMX95], },
 	{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
 	{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },