| Message ID | 20240418-dts_8qm_audio-v2-5-e40fe76b60a6@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: imx8qm Add audio\flexcan\i2c\fec1 nodes for imx8qm-mek board | expand |
On Thu, Apr 18, 2024 at 1:37 PM Frank Li <Frank.Li@nxp.com> wrote: > + lsm303arg@19 { > + compatible = "st,lsm303agr-accel"; > + reg = <0x19>; > + }; > + > + fxas21002c@20 { > + compatible = "nxp,fxas21002c"; > + reg = <0x20>; > + }; > + > + isl29023@44 { > + compatible = "isil,isl29023"; > + reg = <0x44>; > + interrupt-parent = <&lsio_gpio4>; > + interrupts = <11 2>; > + }; > + > + mpl3115@60 { > + compatible = "fsl,mpl3115"; > + reg = <0x60>; > + }; > + > + max7322: gpio@68 { > + compatible = "maxim,max7322"; > + reg = <0x68>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + l3g4250@69 { > + compatible = "st,l3g4200d-gyro"; > + reg = <0x69>; > + }; Same comment I did yesterday on another patch from you: none of these node names are generic.
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 9f8d3df00f793..e5740f301bde0 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -96,6 +96,49 @@ &adc0 { status = "okay"; }; +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + lsm303arg@19 { + compatible = "st,lsm303agr-accel"; + reg = <0x19>; + }; + + fxas21002c@20 { + compatible = "nxp,fxas21002c"; + reg = <0x20>; + }; + + isl29023@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + interrupt-parent = <&lsio_gpio4>; + interrupts = <11 2>; + }; + + mpl3115@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; + + max7322: gpio@68 { + compatible = "maxim,max7322"; + reg = <0x68>; + gpio-controller; + #gpio-cells = <2>; + }; + + l3g4250@69 { + compatible = "st,l3g4200d-gyro"; + reg = <0x69>; + }; +}; + &i2c1 { #address-cells = <1>; #size-cells = <0>; @@ -283,6 +326,13 @@ IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x0600004c >; }; + pinctrl_i2c0: i2c0grp { + fsl,pins = < + IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x06000021 + IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA 0x06000021 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c
Add i2c0 and all devices under it for imx8qm-mek board. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 50 ++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+)