diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index b8ef9b938856..42bbe491a29b 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -361,7 +362,7 @@ lpuart1: serial@44380000 {
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma1 17 0 1>, <&edma1 16 0 0>;
+				dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -372,7 +373,7 @@ lpuart2: serial@44390000 {
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma1 19 0 1>, <&edma1 18 0 0>;
+				dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -400,7 +401,7 @@ sai1: sai@443b0000 {
 					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
 					 <&clk IMX93_CLK_DUMMY>;
 				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
+				dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -737,7 +738,7 @@ lpuart3: serial@42570000 {
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 18 0 1>, <&edma2 17 0 0>;
+				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -748,7 +749,7 @@ lpuart4: serial@42580000 {
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 20 0 1>, <&edma2 19 0 0>;
+				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -759,7 +760,7 @@ lpuart5: serial@42590000 {
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 22 0 1>, <&edma2 21 0 0>;
+				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -770,7 +771,7 @@ lpuart6: serial@425a0000 {
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 24 0 1>, <&edma2 23 0 0>;
+				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -813,7 +814,7 @@ sai2: sai@42650000 {
 					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
 					 <&clk IMX93_CLK_DUMMY>;
 				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
+				dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -826,7 +827,7 @@ sai3: sai@42660000 {
 					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
 					 <&clk IMX93_CLK_DUMMY>;
 				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
+				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -845,7 +846,7 @@ xcvr: xcvr@42680000 {
 					 <&clk IMX93_CLK_DUMMY>,
 					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
 				clock-names = "ipg", "phy", "spba", "pll_ipg";
-				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+				dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -856,7 +857,7 @@ lpuart7: serial@42690000 {
 				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 88 0 1>, <&edma2 87 0 0>;
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -867,7 +868,7 @@ lpuart8: serial@426a0000 {
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
