| Message ID | 20240521102435.10019-1-marex@denx.de (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [1/3] arm64: dts: imx8mm: Describe carrier board 20 MHz Xtal on i.MX8MM Menlo board | expand |
> Subject: [PATCH 1/3] arm64: dts: imx8mm: Describe carrier board 20 MHz > Xtal on i.MX8MM Menlo board > > The i.MX8MM Menlo carrier board uses dedicated 20 MHz Xtal to supply > clock to second SPI CAN controller on the carrier board as well as CPLD on the > same board. Fix incorrect reuse of SoM 20 MHz Xtal for that purpose, > describe the separate Xtal and use it. > > Signed-off-by: Marek Vasut <marex@denx.de> > --- > Cc: Conor Dooley <conor+dt@kernel.org> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Rob Herring <robh@kernel.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: devicetree@vger.kernel.org > Cc: imx@lists.linux.dev > Cc: linux-arm-kernel@lists.infradead.org > --- > arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts > b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts > index 0b123a84018b2..4c38979f7333f 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts > +++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts > @@ -14,6 +14,13 @@ / { > "toradex,verdin-imx8mm", > "fsl,imx8mm"; > > + /* Carrier board Xtal for SPI CAN controller and CPLD */ > + clk20mcb: clk-20m-cb { Per fixed-clock.yaml, nodename should be clock-xx. Regards, Peng. > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <20000000>; > + }; > + > /delete-node/ gpio-keys; > > leds { > @@ -60,7 +67,7 @@ &ecspi1 { > /* CAN controller on the baseboard */ > canfd: can@0 { > compatible = "microchip,mcp2518fd"; > - clocks = <&clk_xtal20>; > + clocks = <&clk20mcb>; > interrupt-parent = <&gpio1>; > interrupts = <8 IRQ_TYPE_EDGE_FALLING>; > reg = <0>; > -- > 2.43.0 >
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts index 0b123a84018b2..4c38979f7333f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts @@ -14,6 +14,13 @@ / { "toradex,verdin-imx8mm", "fsl,imx8mm"; + /* Carrier board Xtal for SPI CAN controller and CPLD */ + clk20mcb: clk-20m-cb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; + /delete-node/ gpio-keys; leds { @@ -60,7 +67,7 @@ &ecspi1 { /* CAN controller on the baseboard */ canfd: can@0 { compatible = "microchip,mcp2518fd"; - clocks = <&clk_xtal20>; + clocks = <&clk20mcb>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>; reg = <0>;
The i.MX8MM Menlo carrier board uses dedicated 20 MHz Xtal to supply clock to second SPI CAN controller on the carrier board as well as CPLD on the same board. Fix incorrect reuse of SoM 20 MHz Xtal for that purpose, describe the separate Xtal and use it. Signed-off-by: Marek Vasut <marex@denx.de> --- Cc: Conor Dooley <conor+dt@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: devicetree@vger.kernel.org Cc: imx@lists.linux.dev Cc: linux-arm-kernel@lists.infradead.org --- arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)