diff mbox series

[v5,11/12] PCI: imx6: Call: Common PHY API to set mode, speed, and submode

Message ID 20240528-pci2_upstream-v5-11-750aa7edb8e2@nxp.com (mailing list archive)
State Superseded
Headers show
Series PCI: imx6: Fix\rename\clean up and add lut information for imx95 | expand

Commit Message

Frank Li May 28, 2024, 7:39 p.m. UTC 
Invoke the common PHY API to configure mode, speed, and submode. While
these functions are optional in the PHY interface, they are necessary for
certain PHY drivers. Lack of support for these functions in a PHY driver
does not cause harm.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index c8d58481f80dc..5a725ef6ed0cb 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -29,6 +29,7 @@ 
 #include <linux/interrupt.h>
 #include <linux/reset.h>
 #include <linux/phy/phy.h>
+#include <linux/phy/pcie.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 
@@ -306,6 +307,10 @@  static void imx_pcie_configure_type(struct imx_pcie *imx_pcie)
 
 	id = imx_pcie->controller_id;
 
+	/* If mode_mask[0] is 0, means use phy driver to set mode */
+	if (!drvdata->mode_mask[0])
+		return;
+
 	/* If mode_mask[id] is zero, means each controller have its individual gpr */
 	if (!drvdata->mode_mask[id])
 		id = 0;
@@ -882,6 +887,7 @@  static void imx_pcie_ltssm_enable(struct device *dev)
 	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
 	const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
 
+	phy_set_speed(imx_pcie->phy, PCI_EXP_LNKCAP_SLS_2_5GB);
 	if (drvdata->ltssm_mask)
 		regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off, drvdata->ltssm_mask,
 				   drvdata->ltssm_mask);
@@ -894,6 +900,7 @@  static void imx_pcie_ltssm_disable(struct device *dev)
 	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
 	const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
 
+	phy_set_speed(imx_pcie->phy, 0);
 	if (drvdata->ltssm_mask)
 		regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off,
 				   drvdata->ltssm_mask, 0);
@@ -1029,6 +1036,12 @@  static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 			goto err_clk_disable;
 		}
 
+		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+		if (ret) {
+			dev_err(dev, "unable to set pcie PHY mode\n");
+			goto err_phy_off;
+		}
+
 		ret = phy_power_on(imx_pcie->phy);
 		if (ret) {
 			dev_err(dev, "waiting for PHY ready timeout!\n");