@@ -99,6 +99,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-icore.dtb \
imx6dl-icore-mipi.dtb \
imx6dl-icore-rqs.dtb \
+ imx6dl-kontron-samx6i-ads2.dtb \
imx6dl-lanmcu.dtb \
imx6dl-mamoj.dtb \
imx6dl-mba6a.dtb \
@@ -207,6 +208,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-icore-ofcap10.dtb \
imx6q-icore-ofcap12.dtb \
imx6q-icore-rqs.dtb \
+ imx6q-kontron-samx6i-ads2.dtb \
imx6q-kp-tpc.dtb \
imx6q-logicpd.dtb \
imx6q-marsboard.dtb \
new file mode 100644
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include "imx6qdl-kontron-samx6i-ads2.dtsi"
+
+/ {
+ model = "Kontron SMARC-sAMX6i Dual-Lite/Solo on SMARC Eval 2.0 carrier";
+ compatible = "kontron,imx6dl-samx6i-ads2", "kontron,imx6dl-samx6i", "fsl,imx6dl";
+};
new file mode 100644
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include "imx6qdl-kontron-samx6i-ads2.dtsi"
+
+/ {
+ model = "Kontron SMARC-sAMX6i Quad/Dual on SMARC Eval 2.0 carrier";
+ compatible = "kontron,imx6q-samx6i-ads2", "kontron,imx6q-samx6i", "fsl,imx6q";
+};
new file mode 100644
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree include for the Kontron SMARC-sAMX6i board on a SMARC Eval
+ * 2.0 carrier (ADS2).
+ *
+ */
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ sound {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out Jack",
+ "Microphone", "Microphone Jack",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "Line Out Jack", "LINEOUTR",
+ "Line Out Jack", "LINEOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "IN1L", "Line In Jack",
+ "IN1R", "Line In Jack",
+ "Microphone Jack", "MICBIAS",
+ "IN2L", "Microphone Jack",
+ "IN2R", "Microphone Jack";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&wm8904>;
+ };
+ };
+};
+
+&audmux {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
+&ecspi4 {
+ flash@1 {
+ compatible = "jedec,spi-nor";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ reg = <1>;
+ };
+};
+
+&fec {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ wm8904: audio-codec@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ clocks = <&clks IMX6QDL_CLK_CKO2>;
+ clock-names = "mclk";
+ };
+};
+
+&i2c3 {
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ };
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
For now, there wasn't any in-tree users of the dtsi files for the Kontron SMARC-sAMX6i board. Let's add device trees, for this board on a Kontron SMARC Eval 2.0 Carrier. Signed-off-by: Michael Walle <mwalle@kernel.org> --- arch/arm/boot/dts/nxp/imx/Makefile | 2 + .../nxp/imx/imx6dl-kontron-samx6i-ads2.dts | 12 ++ .../dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts | 12 ++ .../nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi | 121 ++++++++++++++++++ 4 files changed, 147 insertions(+) create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi