deleted file mode 100644
@@ -1,196 +0,0 @@
-* Freescale Management Complex
-
-The Freescale Management Complex (fsl-mc) is a hardware resource
-manager that manages specialized hardware objects used in
-network-oriented packet processing applications. After the fsl-mc
-block is enabled, pools of hardware resources are available, such as
-queues, buffer pools, I/O interfaces. These resources are building
-blocks that can be used to create functional hardware objects/devices
-such as network interfaces, crypto accelerator instances, L2 switches,
-etc.
-
-For an overview of the DPAA2 architecture and fsl-mc bus see:
-Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
-
-As described in the above overview, all DPAA2 objects in a DPRC share the
-same hardware "isolation context" and a 10-bit value called an ICID
-(isolation context id) is expressed by the hardware to identify
-the requester.
-
-The generic 'iommus' property is insufficient to describe the relationship
-between ICIDs and IOMMUs, so an iommu-map property is used to define
-the set of possible ICIDs under a root DPRC and how they map to
-an IOMMU.
-
-For generic IOMMU bindings, see
-Documentation/devicetree/bindings/iommu/iommu.txt.
-
-For arm-smmu binding, see:
-Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
-
-The MSI writes are accompanied by sideband data which is derived from the ICID.
-The msi-map property is used to associate the devices with both the ITS
-controller and the sideband data which accompanies the writes.
-
-For generic MSI bindings, see
-Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-For GICv3 and GIC ITS bindings, see:
-Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml.
-
-Required properties:
-
- - compatible
- Value type: <string>
- Definition: Must be "fsl,qoriq-mc". A Freescale Management Complex
- compatible with this binding must have Block Revision
- Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
- the MC control register region.
-
- - reg
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies one or two regions
- defining the MC's registers:
-
- -the first region is the command portal for the
- this machine and must always be present
-
- -the second region is the MC control registers. This
- region may not be present in some scenarios, such
- as in the device tree presented to a virtual machine.
-
- - ranges
- Value type: <prop-encoded-array>
- Definition: A standard property. Defines the mapping between the child
- MC address space and the parent system address space.
-
- The MC address space is defined by 3 components:
- <region type> <offset hi> <offset lo>
-
- Valid values for region type are
- 0x0 - MC portals
- 0x1 - QBMAN portals
-
- - #address-cells
- Value type: <u32>
- Definition: Must be 3. (see definition in 'ranges' property)
-
- - #size-cells
- Value type: <u32>
- Definition: Must be 1.
-
-Sub-nodes:
-
- The fsl-mc node may optionally have dpmac sub-nodes that describe
- the relationship between the Ethernet MACs which belong to the MC
- and the Ethernet PHYs on the system board.
-
- The dpmac nodes must be under a node named "dpmacs" which contains
- the following properties:
-
- - #address-cells
- Value type: <u32>
- Definition: Must be present if dpmac sub-nodes are defined and must
- have a value of 1.
-
- - #size-cells
- Value type: <u32>
- Definition: Must be present if dpmac sub-nodes are defined and must
- have a value of 0.
-
- These nodes must have the following properties:
-
- - compatible
- Value type: <string>
- Definition: Must be "fsl,qoriq-mc-dpmac".
-
- - reg
- Value type: <prop-encoded-array>
- Definition: Specifies the id of the dpmac.
-
- - phy-handle
- Value type: <phandle>
- Definition: Specifies the phandle to the PHY device node associated
- with the this dpmac.
-Optional properties:
-
-- iommu-map: Maps an ICID to an IOMMU and associated iommu-specifier
- data.
-
- The property is an arbitrary number of tuples of
- (icid-base,iommu,iommu-base,length).
-
- Any ICID i in the interval [icid-base, icid-base + length) is
- associated with the listed IOMMU, with the iommu-specifier
- (i - icid-base + iommu-base).
-
-- msi-map: Maps an ICID to a GIC ITS and associated msi-specifier
- data.
-
- The property is an arbitrary number of tuples of
- (icid-base,gic-its,msi-base,length).
-
- Any ICID in the interval [icid-base, icid-base + length) is
- associated with the listed GIC ITS, with the msi-specifier
- (i - icid-base + msi-base).
-
-Deprecated properties:
-
- - msi-parent
- Value type: <phandle>
- Definition: Describes the MSI controller node handling message
- interrupts for the MC. When there is no translation
- between the ICID and deviceID this property can be used
- to describe the MSI controller used by the devices on the
- mc-bus.
- The use of this property for mc-bus is deprecated. Please
- use msi-map.
-
-Example:
-
- smmu: iommu@5000000 {
- compatible = "arm,mmu-500";
- #iommu-cells = <1>;
- stream-match-mask = <0x7C00>;
- ...
- };
-
- gic: interrupt-controller@6000000 {
- compatible = "arm,gic-v3";
- ...
- }
- its: gic-its@6020000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- ...
- };
-
- fsl_mc: fsl-mc@80c000000 {
- compatible = "fsl,qoriq-mc";
- reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
- <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
- /* define map for ICIDs 23-64 */
- iommu-map = <23 &smmu 23 41>;
- /* define msi map for ICIDs 23-64 */
- msi-map = <23 &its 23 41>;
- #address-cells = <3>;
- #size-cells = <1>;
-
- /*
- * Region type 0x0 - MC portals
- * Region type 0x1 - QBMAN portals
- */
- ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
- 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
-
- dpmacs {
- #address-cells = <1>;
- #size-cells = <0>;
-
- dpmac@1 {
- compatible = "fsl,qoriq-mc-dpmac";
- reg = <1>;
- phy-handle = <&mdio0_phy0>;
- }
- }
- };
new file mode 100644
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Management Complex
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description: |
+ The Freescale Management Complex (fsl-mc) is a hardware resource
+ manager that manages specialized hardware objects used in
+ network-oriented packet processing applications. After the fsl-mc
+ block is enabled, pools of hardware resources are available, such as
+ queues, buffer pools, I/O interfaces. These resources are building
+ blocks that can be used to create functional hardware objects/devices
+ such as network interfaces, crypto accelerator instances, L2 switches,
+ etc.
+
+ For an overview of the DPAA2 architecture and fsl-mc bus see:
+ Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
+
+ As described in the above overview, all DPAA2 objects in a DPRC share the
+ same hardware "isolation context" and a 10-bit value called an ICID
+ (isolation context id) is expressed by the hardware to identify
+ the requester.
+
+ The generic 'iommus' property is insufficient to describe the relationship
+ between ICIDs and IOMMUs, so an iommu-map property is used to define
+ the set of possible ICIDs under a root DPRC and how they map to
+ an IOMMU.
+
+ For generic IOMMU bindings, see
+ Documentation/devicetree/bindings/iommu/iommu.txt.
+
+ For arm-smmu binding, see:
+ Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
+
+ The MSI writes are accompanied by sideband data which is derived from the ICID.
+ The msi-map property is used to associate the devices with both the ITS
+ controller and the sideband data which accompanies the writes.
+
+ For generic MSI bindings, see
+ Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+ For GICv3 and GIC ITS bindings, see:
+ Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml.
+
+properties:
+ compatible:
+ enum:
+ - fsl,qoriq-mc
+ description:
+ Must be "fsl,qoriq-mc". A Freescale Management Complex
+ compatible with this binding must have Block Revision
+ Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
+ the MC control register region.
+
+ reg:
+ items:
+ - description:
+ the first region is the command portal for the
+ this machine and must always be present
+
+ - description:
+ the second region is the MC control registers. This
+ region may not be present in some scenarios, such
+ as in the device tree presented to a virtual machine.
+
+ ranges:
+ description: |
+ A standard property. Defines the mapping between the child
+ MC address space and the parent system address space.
+
+ The MC address space is defined by 3 components:
+ <region type> <offset hi> <offset lo>
+
+ Valid values for region type are
+ 0x0 - MC portals
+ 0x1 - QBMAN portals
+
+ "#address-cells":
+ const: 3
+
+ "#size-cells":
+ const: 1
+
+ iommu-map:
+ description: |
+ Maps an ICID to an IOMMU and associated iommu-specifier
+ data.
+
+ The property is an arbitrary number of tuples of
+ (icid-base,iommu,iommu-base,length).
+
+ Any ICID i in the interval [icid-base, icid-base + length) is
+ associated with the listed IOMMU, with the iommu-specifier
+ (i - icid-base + iommu-base).
+
+ msi-map:
+ description: |
+ Maps an ICID to a GIC ITS and associated msi-specifier
+ data.
+
+ The property is an arbitrary number of tuples of
+ (icid-base,gic-its,msi-base,length).
+
+ Any ICID in the interval [icid-base, icid-base + length) is
+ associated with the listed GIC ITS, with the msi-specifier
+ (i - icid-base + msi-base).
+
+ msi-parent:
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Describes the MSI controller node handling message
+ interrupts for the MC. When there is no translation
+ between the ICID and deviceID this property can be used
+ to describe the MSI controller used by the devices on the
+ mc-bus.
+ The use of this property for mc-bus is deprecated. Please
+ use msi-map.
+
+ dma-coherent: true
+
+ dpmacs:
+ type: object
+ description:
+ The fsl-mc node may optionally have dpmac sub-nodes that describe
+ the relationship between the Ethernet MACs which belong to the MC
+ and the Ethernet PHYs on the system board.
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ '^(dpmac|ethernet)@[a-f0-9]+$':
+ $ref: /schemas/net/fsl,qoriq-mc-dpmac.yaml
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ fsl-mc@80c000000 {
+ compatible = "fsl,qoriq-mc";
+ reg = <0x0c000000 0x40>, /* MC portal base */
+ <0x08340000 0x40000>; /* MC control reg */
+ /* define map for ICIDs 23-64 */
+ iommu-map = <23 &smmu 23 41>;
+ /* define msi map for ICIDs 23-64 */
+ msi-map = <23 &its 23 41>;
+ #address-cells = <3>;
+ #size-cells = <1>;
+
+ /*
+ * Region type 0x0 - MC portals
+ * Region type 0x1 - QBMAN portals
+ */
+ ranges = <0x0 0x0 0x8 0x0c000000 0x4000000
+ 0x1 0x0 0x8 0x18000000 0x8000000>;
+
+ dpmacs {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpmac@1 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <1>;
+ phy-handle = <&mdio0_phy0>;
+ };
+ };
+ };
Convert fsl,qoriq-mc from txt to yaml format. Addition changes: - Child node name allow 'ethernet'. - Use 32bit address in example. - Fixed missed ';' in example. - Allow dma-coherent. - Remove smmu, its part in example. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- .../devicetree/bindings/misc/fsl,qoriq-mc.txt | 196 ------------------ .../bindings/misc/fsl,qoriq-mc.yaml | 187 +++++++++++++++++ 2 files changed, 187 insertions(+), 196 deletions(-) delete mode 100644 Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt create mode 100644 Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml