Message ID | 20240617-pci2_upstream-v6-5-e0821238f997@nxp.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | PCI: imx6: Fix\rename\clean up and add lut information for imx95 | expand |
On Mon, Jun 17, 2024 at 04:16:41PM -0400, Frank Li wrote: > Instead of using the switch case statement to assert/dassert the core reset > handled by this driver itself, let's introduce a new callback core_reset() > and define it for platforms that require it. This simplifies the code. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> - Mani > --- > drivers/pci/controller/dwc/pci-imx6.c | 134 ++++++++++++++++++---------------- > 1 file changed, 71 insertions(+), 63 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index ff9d0098294fa..6f68bee111029 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -104,6 +104,7 @@ struct imx_pcie_drvdata { > const struct pci_epc_features *epc_features; > int (*init_phy)(struct imx_pcie *pcie); > int (*set_ref_clk)(struct imx_pcie *pcie, bool enable); > + int (*core_reset)(struct imx_pcie *pcie, bool assert); > }; > > struct imx_pcie { > @@ -672,35 +673,75 @@ static void imx_pcie_clk_disable(struct imx_pcie *imx_pcie) > clk_bulk_disable_unprepare(imx_pcie->drvdata->clks_cnt, imx_pcie->clks); > } > > +static int imx6sx_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > +{ > + if (assert) > + regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, > + IMX6SX_GPR12_PCIE_TEST_POWERDOWN); > + > + /* Force PCIe PHY reset */ > + regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5, IMX6SX_GPR5_PCIE_BTNRST_RESET, > + assert ? IMX6SX_GPR5_PCIE_BTNRST_RESET : 0); > + return 0; > +} > + > +static int imx6qp_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > +{ > + regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_SW_RST, > + assert ? IMX6Q_GPR1_PCIE_SW_RST : 0); > + if (!assert) > + usleep_range(200, 500); > + > + return 0; > +} > + > +static int imx6q_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > +{ > + if (!assert) > + return 0; > + > + regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD); > + regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN); > + > + return 0; > +} > + > +static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) > +{ > + struct dw_pcie *pci = imx_pcie->pci; > + struct device *dev = pci->dev; > + > + if (assert) > + return 0; > + > + /* > + * Workaround for ERR010728, failure of PCI-e PLL VCO to > + * oscillate, especially when cold. This turns off "Duty-cycle > + * Corrector" and other mysterious undocumented things. > + */ > + > + if (likely(imx_pcie->phy_base)) { > + /* De-assert DCC_FB_EN */ > + writel(PCIE_PHY_CMN_REG4_DCC_FB_EN, imx_pcie->phy_base + PCIE_PHY_CMN_REG4); > + /* Assert RX_EQS and RX_EQS_SEL */ > + writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL | PCIE_PHY_CMN_REG24_RX_EQ, > + imx_pcie->phy_base + PCIE_PHY_CMN_REG24); > + /* Assert ATT_MODE */ > + writel(PCIE_PHY_CMN_REG26_ATT_MODE, imx_pcie->phy_base + PCIE_PHY_CMN_REG26); > + } else { > + dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n"); > + } > + imx7d_pcie_wait_for_phy_pll_lock(imx_pcie); > + return 0; > +} > + > static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie) > { > reset_control_assert(imx_pcie->pciephy_reset); > reset_control_assert(imx_pcie->apps_reset); > > - switch (imx_pcie->drvdata->variant) { > - case IMX6SX: > - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, > - IMX6SX_GPR12_PCIE_TEST_POWERDOWN, > - IMX6SX_GPR12_PCIE_TEST_POWERDOWN); > - /* Force PCIe PHY reset */ > - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5, > - IMX6SX_GPR5_PCIE_BTNRST_RESET, > - IMX6SX_GPR5_PCIE_BTNRST_RESET); > - break; > - case IMX6QP: > - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, > - IMX6Q_GPR1_PCIE_SW_RST, > - IMX6Q_GPR1_PCIE_SW_RST); > - break; > - case IMX6Q: > - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, > - IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); > - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, > - IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16); > - break; > - default: > - break; > - } > + if (imx_pcie->drvdata->core_reset) > + imx_pcie->drvdata->core_reset(imx_pcie, true); > > /* Some boards don't have PCIe reset GPIO. */ > if (gpio_is_valid(imx_pcie->reset_gpio)) > @@ -710,47 +751,10 @@ static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie) > > static int imx_pcie_deassert_core_reset(struct imx_pcie *imx_pcie) > { > - struct dw_pcie *pci = imx_pcie->pci; > - struct device *dev = pci->dev; > - > reset_control_deassert(imx_pcie->pciephy_reset); > > - switch (imx_pcie->drvdata->variant) { > - case IMX7D: > - /* Workaround for ERR010728, failure of PCI-e PLL VCO to > - * oscillate, especially when cold. This turns off "Duty-cycle > - * Corrector" and other mysterious undocumented things. > - */ > - if (likely(imx_pcie->phy_base)) { > - /* De-assert DCC_FB_EN */ > - writel(PCIE_PHY_CMN_REG4_DCC_FB_EN, > - imx_pcie->phy_base + PCIE_PHY_CMN_REG4); > - /* Assert RX_EQS and RX_EQS_SEL */ > - writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL > - | PCIE_PHY_CMN_REG24_RX_EQ, > - imx_pcie->phy_base + PCIE_PHY_CMN_REG24); > - /* Assert ATT_MODE */ > - writel(PCIE_PHY_CMN_REG26_ATT_MODE, > - imx_pcie->phy_base + PCIE_PHY_CMN_REG26); > - } else { > - dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n"); > - } > - > - imx7d_pcie_wait_for_phy_pll_lock(imx_pcie); > - break; > - case IMX6SX: > - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5, > - IMX6SX_GPR5_PCIE_BTNRST_RESET, 0); > - break; > - case IMX6QP: > - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, > - IMX6Q_GPR1_PCIE_SW_RST, 0); > - > - usleep_range(200, 500); > - break; > - default: > - break; > - } > + if (imx_pcie->drvdata->core_reset) > + imx_pcie->drvdata->core_reset(imx_pcie, false); > > /* Some boards don't have PCIe reset GPIO. */ > if (gpio_is_valid(imx_pcie->reset_gpio)) { > @@ -1458,6 +1462,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, > .init_phy = imx_pcie_init_phy, > .set_ref_clk = imx6q_pcie_set_ref_clk, > + .core_reset = imx6q_pcie_core_reset, > }, > [IMX6SX] = { > .variant = IMX6SX, > @@ -1473,6 +1478,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, > .init_phy = imx6sx_pcie_init_phy, > .set_ref_clk = imx6sx_pcie_set_ref_clk, > + .core_reset = imx6sx_pcie_core_reset, > }, > [IMX6QP] = { > .variant = IMX6QP, > @@ -1489,6 +1495,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, > .init_phy = imx_pcie_init_phy, > .set_ref_clk = imx6q_pcie_set_ref_clk, > + .core_reset = imx6qp_pcie_core_reset, > }, > [IMX7D] = { > .variant = IMX7D, > @@ -1502,6 +1509,7 @@ static const struct imx_pcie_drvdata drvdata[] = { > .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, > .init_phy = imx7d_pcie_init_phy, > .set_ref_clk = imx7d_pcie_set_ref_clk, > + .core_reset = imx7d_pcie_core_reset, > }, > [IMX8MQ] = { > .variant = IMX8MQ, > > -- > 2.34.1 >
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index ff9d0098294fa..6f68bee111029 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -104,6 +104,7 @@ struct imx_pcie_drvdata { const struct pci_epc_features *epc_features; int (*init_phy)(struct imx_pcie *pcie); int (*set_ref_clk)(struct imx_pcie *pcie, bool enable); + int (*core_reset)(struct imx_pcie *pcie, bool assert); }; struct imx_pcie { @@ -672,35 +673,75 @@ static void imx_pcie_clk_disable(struct imx_pcie *imx_pcie) clk_bulk_disable_unprepare(imx_pcie->drvdata->clks_cnt, imx_pcie->clks); } +static int imx6sx_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) +{ + if (assert) + regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_TEST_POWERDOWN); + + /* Force PCIe PHY reset */ + regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5, IMX6SX_GPR5_PCIE_BTNRST_RESET, + assert ? IMX6SX_GPR5_PCIE_BTNRST_RESET : 0); + return 0; +} + +static int imx6qp_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) +{ + regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_SW_RST, + assert ? IMX6Q_GPR1_PCIE_SW_RST : 0); + if (!assert) + usleep_range(200, 500); + + return 0; +} + +static int imx6q_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) +{ + if (!assert) + return 0; + + regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD); + regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_REF_CLK_EN); + + return 0; +} + +static int imx7d_pcie_core_reset(struct imx_pcie *imx_pcie, bool assert) +{ + struct dw_pcie *pci = imx_pcie->pci; + struct device *dev = pci->dev; + + if (assert) + return 0; + + /* + * Workaround for ERR010728, failure of PCI-e PLL VCO to + * oscillate, especially when cold. This turns off "Duty-cycle + * Corrector" and other mysterious undocumented things. + */ + + if (likely(imx_pcie->phy_base)) { + /* De-assert DCC_FB_EN */ + writel(PCIE_PHY_CMN_REG4_DCC_FB_EN, imx_pcie->phy_base + PCIE_PHY_CMN_REG4); + /* Assert RX_EQS and RX_EQS_SEL */ + writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL | PCIE_PHY_CMN_REG24_RX_EQ, + imx_pcie->phy_base + PCIE_PHY_CMN_REG24); + /* Assert ATT_MODE */ + writel(PCIE_PHY_CMN_REG26_ATT_MODE, imx_pcie->phy_base + PCIE_PHY_CMN_REG26); + } else { + dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n"); + } + imx7d_pcie_wait_for_phy_pll_lock(imx_pcie); + return 0; +} + static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie) { reset_control_assert(imx_pcie->pciephy_reset); reset_control_assert(imx_pcie->apps_reset); - switch (imx_pcie->drvdata->variant) { - case IMX6SX: - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, - IMX6SX_GPR12_PCIE_TEST_POWERDOWN, - IMX6SX_GPR12_PCIE_TEST_POWERDOWN); - /* Force PCIe PHY reset */ - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5, - IMX6SX_GPR5_PCIE_BTNRST_RESET, - IMX6SX_GPR5_PCIE_BTNRST_RESET); - break; - case IMX6QP: - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_SW_RST, - IMX6Q_GPR1_PCIE_SW_RST); - break; - case IMX6Q: - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16); - break; - default: - break; - } + if (imx_pcie->drvdata->core_reset) + imx_pcie->drvdata->core_reset(imx_pcie, true); /* Some boards don't have PCIe reset GPIO. */ if (gpio_is_valid(imx_pcie->reset_gpio)) @@ -710,47 +751,10 @@ static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie) static int imx_pcie_deassert_core_reset(struct imx_pcie *imx_pcie) { - struct dw_pcie *pci = imx_pcie->pci; - struct device *dev = pci->dev; - reset_control_deassert(imx_pcie->pciephy_reset); - switch (imx_pcie->drvdata->variant) { - case IMX7D: - /* Workaround for ERR010728, failure of PCI-e PLL VCO to - * oscillate, especially when cold. This turns off "Duty-cycle - * Corrector" and other mysterious undocumented things. - */ - if (likely(imx_pcie->phy_base)) { - /* De-assert DCC_FB_EN */ - writel(PCIE_PHY_CMN_REG4_DCC_FB_EN, - imx_pcie->phy_base + PCIE_PHY_CMN_REG4); - /* Assert RX_EQS and RX_EQS_SEL */ - writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL - | PCIE_PHY_CMN_REG24_RX_EQ, - imx_pcie->phy_base + PCIE_PHY_CMN_REG24); - /* Assert ATT_MODE */ - writel(PCIE_PHY_CMN_REG26_ATT_MODE, - imx_pcie->phy_base + PCIE_PHY_CMN_REG26); - } else { - dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n"); - } - - imx7d_pcie_wait_for_phy_pll_lock(imx_pcie); - break; - case IMX6SX: - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR5, - IMX6SX_GPR5_PCIE_BTNRST_RESET, 0); - break; - case IMX6QP: - regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_SW_RST, 0); - - usleep_range(200, 500); - break; - default: - break; - } + if (imx_pcie->drvdata->core_reset) + imx_pcie->drvdata->core_reset(imx_pcie, false); /* Some boards don't have PCIe reset GPIO. */ if (gpio_is_valid(imx_pcie->reset_gpio)) { @@ -1458,6 +1462,7 @@ static const struct imx_pcie_drvdata drvdata[] = { .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, .init_phy = imx_pcie_init_phy, .set_ref_clk = imx6q_pcie_set_ref_clk, + .core_reset = imx6q_pcie_core_reset, }, [IMX6SX] = { .variant = IMX6SX, @@ -1473,6 +1478,7 @@ static const struct imx_pcie_drvdata drvdata[] = { .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, .init_phy = imx6sx_pcie_init_phy, .set_ref_clk = imx6sx_pcie_set_ref_clk, + .core_reset = imx6sx_pcie_core_reset, }, [IMX6QP] = { .variant = IMX6QP, @@ -1489,6 +1495,7 @@ static const struct imx_pcie_drvdata drvdata[] = { .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, .init_phy = imx_pcie_init_phy, .set_ref_clk = imx6q_pcie_set_ref_clk, + .core_reset = imx6qp_pcie_core_reset, }, [IMX7D] = { .variant = IMX7D, @@ -1502,6 +1509,7 @@ static const struct imx_pcie_drvdata drvdata[] = { .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE, .init_phy = imx7d_pcie_init_phy, .set_ref_clk = imx7d_pcie_set_ref_clk, + .core_reset = imx7d_pcie_core_reset, }, [IMX8MQ] = { .variant = IMX8MQ,
Instead of using the switch case statement to assert/dassert the core reset handled by this driver itself, let's introduce a new callback core_reset() and define it for platforms that require it. This simplifies the code. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- drivers/pci/controller/dwc/pci-imx6.c | 134 ++++++++++++++++++---------------- 1 file changed, 71 insertions(+), 63 deletions(-)