diff mbox series

[v3,04/41] iio: adc: ad4130: make use of regmap_clear_bits()

Message ID 20240617-review-v3-4-88d1338c4cca@baylibre.com (mailing list archive)
State New
Headers show
Series iio: simplify with regmap_set_bits(), regmap_clear_bits() | expand

Commit Message

Trevor Gamblin June 17, 2024, 1:49 p.m. UTC 
Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
---
 drivers/iio/adc/ad4130.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Nuno Sá June 17, 2024, 2:42 p.m. UTC | #1 
On Mon, 2024-06-17 at 09:49 -0400, Trevor Gamblin wrote:
> Instead of using regmap_update_bits() and passing val = 0, use
> regmap_clear_bits().
> 
> Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
> Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
> ---

Reviewed-by: Nuno Sa <nuno.sa@analog.com>
diff mbox series

Patch

diff --git a/drivers/iio/adc/ad4130.c b/drivers/iio/adc/ad4130.c
index aaf1fb0ac447..e134d6497827 100644
--- a/drivers/iio/adc/ad4130.c
+++ b/drivers/iio/adc/ad4130.c
@@ -1883,8 +1883,8 @@  static int ad4130_setup(struct iio_dev *indio_dev)
 	if (ret)
 		return ret;
 
-	ret = regmap_update_bits(st->regmap, AD4130_FIFO_CONTROL_REG,
-				 AD4130_FIFO_CONTROL_HEADER_MASK, 0);
+	ret = regmap_clear_bits(st->regmap, AD4130_FIFO_CONTROL_REG,
+				AD4130_FIFO_CONTROL_HEADER_MASK);
 	if (ret)
 		return ret;