| Message ID | 20240709-thermal-probe-v1-4-241644e2b6e0@linaro.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | thermal/drivers: simplify probe() | expand |
Hello Krzysztof > -----Original Message----- > From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Sent: Tuesday, July 9, 2024 6:30 PM > To: Rafael J. Wysocki <rafael@kernel.org>; Daniel Lezcano > <daniel.lezcano@linaro.org>; Zhang Rui <rui.zhang@intel.com>; Lukasz Luba > <lukasz.luba@arm.com>; Florian Fainelli <florian.fainelli@broadcom.com>; > Ray Jui <rjui@broadcom.com>; Scott Branden <sbranden@broadcom.com>; > Broadcom internal kernel review list <bcm-kernel-feedback- > list@broadcom.com>; Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>; > Krzysztof Kozlowski <krzk@kernel.org>; Alim Akhtar > <alim.akhtar@samsung.com>; Shawn Guo <shawnguo@kernel.org>; Sascha > Hauer <s.hauer@pengutronix.de>; Pengutronix Kernel Team > <kernel@pengutronix.de>; Fabio Estevam <festevam@gmail.com>; Amit > Kucheria <amitk@kernel.org>; Thara Gopinath <thara.gopinath@gmail.com> > Cc: linux-pm@vger.kernel.org; linux-rpi-kernel@lists.infradead.org; linux- > arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; linux- > samsung-soc@vger.kernel.org; imx@lists.linux.dev; linux-arm- > msm@vger.kernel.org; Krzysztof Kozlowski > <krzysztof.kozlowski@linaro.org> > Subject: [PATCH 04/12] thermal/drivers/exynos: simplify probe() with local > dev variable > > Simplify the probe() function by using local 'dev' instead of &pdev->dev. > While touching devm_kzalloc(), use preferred sizeof(*) syntax. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> > drivers/thermal/samsung/exynos_tmu.c | 42 +++++++++++++++++---------- > --------- > 1 file changed, 20 insertions(+), 22 deletions(-) > > diff --git a/drivers/thermal/samsung/exynos_tmu.c > b/drivers/thermal/samsung/exynos_tmu.c > index 6482513bfe66..1152871cc982 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -1004,11 +1004,11 @@ static const struct thermal_zone_device_ops > exynos_sensor_ops = { > > static int exynos_tmu_probe(struct platform_device *pdev) { > + struct device *dev = &pdev->dev; > struct exynos_tmu_data *data; > int ret; > > - data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), > - GFP_KERNEL); > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > if (!data) > return -ENOMEM; > > @@ -1020,7 +1020,7 @@ static int exynos_tmu_probe(struct > platform_device *pdev) > * TODO: Add regulator as an SOC feature, so that regulator enable > * is a compulsory call. > */ > - ret = devm_regulator_get_enable_optional(&pdev->dev, "vtmu"); > + ret = devm_regulator_get_enable_optional(dev, "vtmu"); > switch (ret) { > case 0: > case -ENODEV: > @@ -1028,8 +1028,7 @@ static int exynos_tmu_probe(struct > platform_device *pdev) > case -EPROBE_DEFER: > return -EPROBE_DEFER; > default: > - dev_err(&pdev->dev, "Failed to get enabled regulator: > %d\n", > - ret); > + dev_err(dev, "Failed to get enabled regulator: %d\n", ret); > return ret; > } > > @@ -1037,44 +1036,44 @@ static int exynos_tmu_probe(struct > platform_device *pdev) > if (ret) > return ret; > > - data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); > + data->clk = devm_clk_get(dev, "tmu_apbif"); > if (IS_ERR(data->clk)) { > - dev_err(&pdev->dev, "Failed to get clock\n"); > + dev_err(dev, "Failed to get clock\n"); > return PTR_ERR(data->clk); > } > > - data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif"); > + data->clk_sec = devm_clk_get(dev, "tmu_triminfo_apbif"); > if (IS_ERR(data->clk_sec)) { > if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) { > - dev_err(&pdev->dev, "Failed to get triminfo > clock\n"); > + dev_err(dev, "Failed to get triminfo clock\n"); > return PTR_ERR(data->clk_sec); > } > } else { > ret = clk_prepare(data->clk_sec); > if (ret) { > - dev_err(&pdev->dev, "Failed to get clock\n"); > + dev_err(dev, "Failed to get clock\n"); > return ret; > } > } > > ret = clk_prepare(data->clk); > if (ret) { > - dev_err(&pdev->dev, "Failed to get clock\n"); > + dev_err(dev, "Failed to get clock\n"); > goto err_clk_sec; > } > > switch (data->soc) { > case SOC_ARCH_EXYNOS5433: > case SOC_ARCH_EXYNOS7: > - data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk"); > + data->sclk = devm_clk_get(dev, "tmu_sclk"); > if (IS_ERR(data->sclk)) { > - dev_err(&pdev->dev, "Failed to get sclk\n"); > + dev_err(dev, "Failed to get sclk\n"); > ret = PTR_ERR(data->sclk); > goto err_clk; > } else { > ret = clk_prepare_enable(data->sclk); > if (ret) { > - dev_err(&pdev->dev, "Failed to enable > sclk\n"); > + dev_err(dev, "Failed to enable sclk\n"); > goto err_clk; > } > } > @@ -1085,33 +1084,32 @@ static int exynos_tmu_probe(struct > platform_device *pdev) > > ret = exynos_tmu_initialize(pdev); > if (ret) { > - dev_err(&pdev->dev, "Failed to initialize TMU\n"); > + dev_err(dev, "Failed to initialize TMU\n"); > goto err_sclk; > } > > - data->tzd = devm_thermal_of_zone_register(&pdev->dev, 0, data, > + data->tzd = devm_thermal_of_zone_register(dev, 0, data, > &exynos_sensor_ops); > if (IS_ERR(data->tzd)) { > ret = PTR_ERR(data->tzd); > if (ret != -EPROBE_DEFER) > - dev_err(&pdev->dev, "Failed to register sensor: > %d\n", > - ret); > + dev_err(dev, "Failed to register sensor: %d\n", ret); > goto err_sclk; > } > > ret = exynos_thermal_zone_configure(pdev); > if (ret) { > - dev_err(&pdev->dev, "Failed to configure the thermal > zone\n"); > + dev_err(dev, "Failed to configure the thermal zone\n"); > goto err_sclk; > } > > - ret = devm_request_threaded_irq(&pdev->dev, data->irq, NULL, > + ret = devm_request_threaded_irq(dev, data->irq, NULL, > exynos_tmu_threaded_irq, > IRQF_TRIGGER_RISING > | IRQF_SHARED | > IRQF_ONESHOT, > - dev_name(&pdev->dev), data); > + dev_name(dev), data); > if (ret) { > - dev_err(&pdev->dev, "Failed to request irq: %d\n", data- > >irq); > + dev_err(dev, "Failed to request irq: %d\n", data->irq); > goto err_sclk; > } > > > -- > 2.43.0
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 6482513bfe66..1152871cc982 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -1004,11 +1004,11 @@ static const struct thermal_zone_device_ops exynos_sensor_ops = { static int exynos_tmu_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct exynos_tmu_data *data; int ret; - data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), - GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; @@ -1020,7 +1020,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) * TODO: Add regulator as an SOC feature, so that regulator enable * is a compulsory call. */ - ret = devm_regulator_get_enable_optional(&pdev->dev, "vtmu"); + ret = devm_regulator_get_enable_optional(dev, "vtmu"); switch (ret) { case 0: case -ENODEV: @@ -1028,8 +1028,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) case -EPROBE_DEFER: return -EPROBE_DEFER; default: - dev_err(&pdev->dev, "Failed to get enabled regulator: %d\n", - ret); + dev_err(dev, "Failed to get enabled regulator: %d\n", ret); return ret; } @@ -1037,44 +1036,44 @@ static int exynos_tmu_probe(struct platform_device *pdev) if (ret) return ret; - data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); + data->clk = devm_clk_get(dev, "tmu_apbif"); if (IS_ERR(data->clk)) { - dev_err(&pdev->dev, "Failed to get clock\n"); + dev_err(dev, "Failed to get clock\n"); return PTR_ERR(data->clk); } - data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif"); + data->clk_sec = devm_clk_get(dev, "tmu_triminfo_apbif"); if (IS_ERR(data->clk_sec)) { if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) { - dev_err(&pdev->dev, "Failed to get triminfo clock\n"); + dev_err(dev, "Failed to get triminfo clock\n"); return PTR_ERR(data->clk_sec); } } else { ret = clk_prepare(data->clk_sec); if (ret) { - dev_err(&pdev->dev, "Failed to get clock\n"); + dev_err(dev, "Failed to get clock\n"); return ret; } } ret = clk_prepare(data->clk); if (ret) { - dev_err(&pdev->dev, "Failed to get clock\n"); + dev_err(dev, "Failed to get clock\n"); goto err_clk_sec; } switch (data->soc) { case SOC_ARCH_EXYNOS5433: case SOC_ARCH_EXYNOS7: - data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk"); + data->sclk = devm_clk_get(dev, "tmu_sclk"); if (IS_ERR(data->sclk)) { - dev_err(&pdev->dev, "Failed to get sclk\n"); + dev_err(dev, "Failed to get sclk\n"); ret = PTR_ERR(data->sclk); goto err_clk; } else { ret = clk_prepare_enable(data->sclk); if (ret) { - dev_err(&pdev->dev, "Failed to enable sclk\n"); + dev_err(dev, "Failed to enable sclk\n"); goto err_clk; } } @@ -1085,33 +1084,32 @@ static int exynos_tmu_probe(struct platform_device *pdev) ret = exynos_tmu_initialize(pdev); if (ret) { - dev_err(&pdev->dev, "Failed to initialize TMU\n"); + dev_err(dev, "Failed to initialize TMU\n"); goto err_sclk; } - data->tzd = devm_thermal_of_zone_register(&pdev->dev, 0, data, + data->tzd = devm_thermal_of_zone_register(dev, 0, data, &exynos_sensor_ops); if (IS_ERR(data->tzd)) { ret = PTR_ERR(data->tzd); if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "Failed to register sensor: %d\n", - ret); + dev_err(dev, "Failed to register sensor: %d\n", ret); goto err_sclk; } ret = exynos_thermal_zone_configure(pdev); if (ret) { - dev_err(&pdev->dev, "Failed to configure the thermal zone\n"); + dev_err(dev, "Failed to configure the thermal zone\n"); goto err_sclk; } - ret = devm_request_threaded_irq(&pdev->dev, data->irq, NULL, + ret = devm_request_threaded_irq(dev, data->irq, NULL, exynos_tmu_threaded_irq, IRQF_TRIGGER_RISING | IRQF_SHARED | IRQF_ONESHOT, - dev_name(&pdev->dev), data); + dev_name(dev), data); if (ret) { - dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); + dev_err(dev, "Failed to request irq: %d\n", data->irq); goto err_sclk; }
Simplify the probe() function by using local 'dev' instead of &pdev->dev. While touching devm_kzalloc(), use preferred sizeof(*) syntax. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- drivers/thermal/samsung/exynos_tmu.c | 42 +++++++++++++++++------------------- 1 file changed, 20 insertions(+), 22 deletions(-)