diff mbox series

[15/17] arm64: dts: imx93-tqma9352-mba93xxla: rename hub to usb

Message ID 20240813-imx_warning-v1-15-3494426aea09@nxp.com (mailing list archive)
State Superseded
Headers show
Series arm64: dts: imx: 3rd dtb warning clearn up | expand

Commit Message

Frank Li Aug. 13, 2024, 4:35 a.m. UTC
Rename hub to usb to fix below warning:
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb: hub@1: $nodename:0: 'hub@1' does not match '^usb(@.*)?'

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts | 2 +-
 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Comments

Alexander Stein Aug. 13, 2024, 8:40 a.m. UTC | #1
Am Dienstag, 13. August 2024, 06:35:10 CEST schrieb Frank Li:
> Rename hub to usb to fix below warning:
> arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb: hub@1: $nodename:0: 'hub@1' does not match '^usb(@.*)?'
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Thanks.

Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>

> ---
>  arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts | 2 +-
>  arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
> index 852dd3d2eac74..325d8097bf7fc 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
> @@ -533,7 +533,7 @@ &usbotg2 {
>  	samsung,picophy-dc-vol-level-adjust = <7>;
>  	status = "okay";
>  
> -	hub_2_0: hub@1 {
> +	hub_2_0: usb@1 {
>  		compatible = "usb424,2517";
>  		reg = <1>;
>  		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
> diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
> index da8f19a646a98..b1fcbc12bd882 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
> @@ -486,7 +486,7 @@ &usbotg2 {
>  	samsung,picophy-dc-vol-level-adjust = <7>;
>  	status = "okay";
>  
> -	hub_2_0: hub@1 {
> +	hub_2_0: usb@1 {
>  		compatible = "usb424,2517";
>  		reg = <1>;
>  		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
> 
>
Alexander Stein Aug. 13, 2024, 8:49 a.m. UTC | #2
Am Dienstag, 13. August 2024, 10:40:04 CEST schrieb Alexander Stein:
> Am Dienstag, 13. August 2024, 06:35:10 CEST schrieb Frank Li:
> > Rename hub to usb to fix below warning:
> > arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb: hub@1: $nodename:0: 'hub@1' does not match '^usb(@.*)?'
> > 
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> 
> Thanks.
> 
> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Still valid, but there is already https://lore.kernel.org/all/20240808123206.192906-1-festevam@gmail.com/

> > ---
> >  arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts | 2 +-
> >  arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 2 +-
> >  2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
> > index 852dd3d2eac74..325d8097bf7fc 100644
> > --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
> > @@ -533,7 +533,7 @@ &usbotg2 {
> >  	samsung,picophy-dc-vol-level-adjust = <7>;
> >  	status = "okay";
> >  
> > -	hub_2_0: hub@1 {
> > +	hub_2_0: usb@1 {
> >  		compatible = "usb424,2517";
> >  		reg = <1>;
> >  		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
> > diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
> > index da8f19a646a98..b1fcbc12bd882 100644
> > --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
> > @@ -486,7 +486,7 @@ &usbotg2 {
> >  	samsung,picophy-dc-vol-level-adjust = <7>;
> >  	status = "okay";
> >  
> > -	hub_2_0: hub@1 {
> > +	hub_2_0: usb@1 {
> >  		compatible = "usb424,2517";
> >  		reg = <1>;
> >  		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
> > 
> > 
> 
> 
>
Krzysztof Kozlowski Aug. 13, 2024, 10:04 a.m. UTC | #3
On 13/08/2024 06:35, Frank Li wrote:
> Rename hub to usb to fix below warning:
> arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb: hub@1: $nodename:0: 'hub@1' does not match '^usb(@.*)?'
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts | 2 +-
>  arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 2 +-

No, synchronize your work with other TQ, so we won't have to do the same
review.

That's not really correct. See other thread.

Best regards,
Krzysztof
Krzysztof Kozlowski Aug. 13, 2024, 10:04 a.m. UTC | #4
On 13/08/2024 10:49, Alexander Stein wrote:
> Am Dienstag, 13. August 2024, 10:40:04 CEST schrieb Alexander Stein:
>> Am Dienstag, 13. August 2024, 06:35:10 CEST schrieb Frank Li:
>>> Rename hub to usb to fix below warning:
>>> arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb: hub@1: $nodename:0: 'hub@1' does not match '^usb(@.*)?'
>>>
>>> Signed-off-by: Frank Li <Frank.Li@nxp.com>
>>
>> Thanks.
>>
>> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> 
> Still valid, but there is already https://lore.kernel.org/all/20240808123206.192906-1-festevam@gmail.com/
> 

Fix the schema instead...

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index 852dd3d2eac74..325d8097bf7fc 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -533,7 +533,7 @@  &usbotg2 {
 	samsung,picophy-dc-vol-level-adjust = <7>;
 	status = "okay";
 
-	hub_2_0: hub@1 {
+	hub_2_0: usb@1 {
 		compatible = "usb424,2517";
 		reg = <1>;
 		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index da8f19a646a98..b1fcbc12bd882 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -486,7 +486,7 @@  &usbotg2 {
 	samsung,picophy-dc-vol-level-adjust = <7>;
 	status = "okay";
 
-	hub_2_0: hub@1 {
+	hub_2_0: usb@1 {
 		compatible = "usb424,2517";
 		reg = <1>;
 		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;